| Description: |
3D Systems ProJet 2500Plus
used machine
On behalf of a customer, we are selling a 3D Systems MultiJetPrinter
type ProJet 2500Plus in very good condition. The machine was used as a
dealer demo machine., The machine has been equipped with new drive
belts and new filters. All materials have been removed according to
the manufacturers instructions. The machine is empty. The printing
time is approx. 1400 hours, 181,000 layers were printed with approx.
24KG of building material and approx. 33KG of support material.,
Equipment:, - 3D Sprint Basic Complimentary Software (on-line
activation), Installation: 2016, Print modes: HD - High Definition,
Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm /
11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790
DPI; 32μ (0.0012 in) layers, Accuracy (typical): ±0.025-0.05 mm
per 25.4 mm of part dimension. Accuracy may vary depending on printing
parameters, part geometry and size, part orientation and type of
post-processing., Building material build material: VisiJet® Armor
M2G-CL – Tough,clear ABS-likeVisiJet® M2R-CL  ÂÂ
– Rigid clear, clear polypropylene-likeVisiJet® M2R-GRY
– Rigid grayVisiJet® M2R-WT  – Rigid
whiteVisiJet® M2R-BK   – Rigid
blackVisiJet® ProFlex M2G- DUR – Tough, VisiJet® M2
EBK    – Elastomeric blackVisiJet® M2
ENT   – Elastomeric natural, Support materials:
VisiJet® M2 SUP, Dimensions in mm (w x h x d): 1120 x 740 x 1070
mm44.1 x 29.1 x 42.1 in, mass: about 220 kg, E-connection /
consumption: 100-127 VAC, 50/60 Hz, single-phase, 15A200-240 VAC, 50
Hz, single-phase, 10ASingle C14 receptacle, certification: CE, Support
material support material: VisiJet® M2 SUP, Net build volume (xyz):
294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz): 800x900x790 DPI;
32μ (0.0012 in) layers, E-connection consumption: 100-127 VAC,
50/60 Hz, single-phase, 15A200-240 VAC, 50 Hz, single-phase, 10ASingle
C14 receptacle, print modes: HD - high F1150054 definition,
resolution (xyz) resolution (xyz) hd mode: 800 x 900 x 790 DPI; 32μ
(0.0012 in) layers, building material: VisiJet® Armor M2G-CL –
Tough,clear ABS-likeVisiJet® M2R-CL – Rigid clear, clear
polypropylene-likeVisiJet® M2R-GRY – Rigid grayVisiJet®
M2R-WT – Rigid whiteVisiJet® M2R-BK – Rigid
blackVisiJet® ProFlex M2G- DUR – Tough, VisiJet® M2 EBK
– Elastomeric blackVisiJet® M2 ENT – Elastomeric natural,
supporting material: VisiJet® M2 SUP, Commissioning: 2017, support
material: VisiJet® M2 SUP, resolution (xyz): 800 x 900 x 790 DPI;
32μ (0.0012 in) layers, Printing modes: HD - high definition,
Support material: VisiJet ® M2 SUP, Dimensions in inch (w x h x d):
1120 x 740 x 1070 mm 44.1 x 29.1 x 42.1 in, Weight: about 220 kg,
Certification: CE
seller offer No. resale 659-2024-mjp
|