used CNC Hydraulic Plate Shear for sale

sheet width: 3050 mmplate thickness: 6,35 mmthickness at Niro-steel: 4,0 mmdown holder: 16 Stücktable length: 575 mmControl: AMADA cutting angle: 40° - 2°20 °0: 305 baroil volume: 100 ltr.total power requirement: 5,5 kWweight of the machine ca.: 6150 kgrange L-W-H: 3790 x 2090 x 1860 mm maintained condition ()Furnishing:- AMADA NC control, swiveling control panel at the front left- Electric back stop, NC controlled- electrical/hydraulic cutting angle adjustment- electrical/hydraulic cutting gap adjustment- Sighting device & cutting line lighting to view the scribe line Shear cutting after visual outline- 1x long side stop- 1x long support arms- Safety device behind the machine- 1x freely movable foot switch- Clippings waste container- original instruction manual Special accessories:- AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanksThe data for this ad wa ...

sheet width: 200 mmplate thickness: 6 mmdistance between columns: 2100 mmno. of strokes: 16 Hub/mintable height: 760 mmback stop - adjustable: 1000 mm/mncutting angle: 1,5 °column arm: 50 mmdown holder: 10 Stückoil volume: 200 ltotal power requirement: 11,75 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 3,1 x 3,43 x 1,65 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 10 mmdistance between columns: 2100 mmno. of strokes: 10 Hub/mintable height: 820 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 10 Stückoil volume: 200 lcutting angle: 1,8 °total power requirement: 22,75 kWweight of the machine ca.: 7,8 tdimensions of the machine ca.: 3,2 x 3,45 x 2,03 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 6 mmdistance between columns: 2600 mmno. of strokes: 16 Hub/mintable height: 760 mmback stop - adjustable: 1000 mm/mncutting angle: 1,5 °column arm: 50 mmlower gears: 13 Stückoil volume: 200 ltotal power requirement: 11,75 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: 3,6 x 3,43x 1,8 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmplate thickness: 6 mmdistance between columns: 3100 mmno. of strokes: 14 Hub/mintable height: 790 mmback stop - adjustable: 1000 mm/mncutting angle: 1,5 °column arm: 50 mmlower gears: 15 Stückoil volume: 200 ltotal power requirement: 11,75 kWweight of the machine ca.: 7,0 tdimensions of the machine ca.: 4,11 x 3,48 x 1,77 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 10 mmdistance between columns: 3100 mmno. of strokes: 10 Hub/mintable height: 805 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 15 Stückoil volume: 300 lcutting angle: 1,8 °total power requirement: 22,75 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: 3,94 x 3,56 x 2,09 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 3000 mmplate thickness: 13 mmdistance between columns: 3100 mmno. of strokes: 8 Hub/mintable height: 805 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 15 Stückoil volume: 400 lcutting angle: 2,3 °total power requirement: 30,75 kWweight of the machine ca.: 11,2 tdimensions of the machine ca.: 3,95 x 3,64 x 2,10 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 3000 mmplate thickness: 16 mmdistance between columns: 3100 mmno. of strokes: 8 Hub/mintable height: 880 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 15 Stückoil volume: 400 lcutting angle: 2,5 °total power requirement: 37,75 kWweight of the machine ca.: 15,0 tdimensions of the machine ca.: 4,04 x 3,75 x 2,37 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 4000 mmplate thickness: 6 mmdistance between columns: 4100 mmno. of strokes: 12 Hub/mintable height: 790 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 19 Stückoil volume: 200 lcutting angle: 1,5 °total power requirement: 11,75 kWweight of the machine ca.: 10.2 tdimensions of the machine ca.: 5,12 x 3,5 x 1,77 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mmplate thickness: 10 mmdistance between columns: 4100 mmno. of strokes: 8 Hub/mintable height: 805 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 19 Stückoil volume: 300 lcutting angle: 1,8 °total power requirement: 22,75 kWweight of the machine ca.: 12 tdimensions of the machine ca.: 4,94 x 3,58 x 2,22 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mmplate thickness: 13 mmdistance between columns: 4100 mmno. of strokes: 8 Hub/mintable height: 805 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 19 Stückoil volume: 400 lcutting angle: 2,3 °total power requirement: 30,75 kWweight of the machine ca.: 14,5 tdimensions of the machine ca.: 4,95 x 3,68 x 2,24 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 3100 mmplate thickness: 20 mmdistance between columns: 3100 mmno. of strokes: 6-8 Hub/mintable height: 880 mmback stop - adjustable: 1000 mm/mncolumn arm: 50 mmdown holder: 19 Stückoil volume: 500 lcutting angle: 2,7 °thickness at Niro-steel: 13 mmrear stop: 200 mm/sec.total power requirement: 37 kWweight of the machine ca.: 23 tdimensions of the machine ca.: 4,15 x 2,49 x 2,6 mRobust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with  ...

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: 20 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °Control: DAC 310 total power requirement: 11.0 kWweight: 5450 kgrange L-W-H: 3800 x 1940 x 1560 mmFurnishing:- electro-hydraulic swing cutting shears including sheet metal holding device- DELEM CNC control unit, model DAC 310” Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Speed 100 mm/sec- electrical cutting length limitation Cutting length limitation to increase the number of strokes/min.- electro-motoric cutting gap adjustment- Tip operation with push buttons on the control panel on the left- front support plates with ball rollers- front finger/intervention protection- 1x side stop with T-slot & millimeter scale- 3x front support arms- original operating instr ...

sheet width: 3100 mmplate thickness: 4 mmcutting angle: 1° 30` °back stop - adjustable: 750 mmweight of the machine ca.: 3800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmno. of strokes: 15 Hub/mincutting angle: 2,0 °back stop - adjustable: max. 1000 mmdown holder: 14 Stückwork height max.: 865 mmColumn width: 3515 mmthroat: 50.0 mmControl: D-Touch 7 oil volume: 200 lengine output: 15.0 kWvoltage: 400 Vweight: 7.650 kgrange L-W-H: 4110 x 2200 x 2100 mm well-maintained / like new condition () New price ~ 45.000 euros Special price on requestFurnishing:- robust electro-hydraulic sheet metal shears- CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back gauge Cutting length control via adjustable stroke length Cutt ...

sheet width: 3050 mmplate thickness: 10,0 mmthickness at Niro-steel: 6,0 mmcutting angle adjustment: 0,5 - 2,5 °cutting gap adjustment: 0,05 - 1,0 mmback stop - adjustable: 10 - 1000 mmadjustment speed: 180 mm/sdown holder: 14 Stückstrokes per minute: 12 - 25 oil volume: 300 Liter0: max. 300 barvoltage: 400 Vmain drive: 18,5 kWweight of the machine ca.: 10.000 kg.dimensions of the machine ca.: 4080 x 2350 x 2060 mm maintained condition () was serviced annually by the manufacturer TRUMPF / EHTFurnishing:- Baffle-guided metal sheet shears with automatic cutting angle adjustment- Machine frame is an all-steel welded construction Side stands are connected to the machine table- EHT / ELGO CNC control model P-9724, front left control panel for backgauge adjustment and program selection (4 axes)- Automatic cutting angle adjustment- Automatic cutting gap adjustment- Automatic cutting gap compe ...

sheet width: 3000 mmplate thickness: 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdown holder: 14 Stückno. of strokes: 20 Hub/mincutting angle: 1.2 °control: CYBTOUCH 6 work height max.: 800 mmoil volume: 150 ltr.total power requirement: 11.0 kWweight: 7060 kgrange L-W-H: 4000 x 2410 x 1610 mm well maintained condition () current new price approx. 42.000 euros Special price on request-------------------------------------------------- Robust electro-hydraulic CNC swing cutting shears including CYBELEC CNC touch screen control including CNC electro-hydraulic cutting gap adjustment-------------------------------------------------- Furnishing:- CNC electro-hydraulic swing cutting shear- including CYBELEC CNC touch screen controller, model CybTouch 6”- some functions of the CNC control: Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material sele ...

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdown holder: 14 Stückno. of strokes: 20 Hub/mincutting angle: 1.2 °control: CYBTOUCH 6 work height max.: 800 mmoil volume: 150 ltr.total power requirement: 11.0 kWweight: 5500 kgrange L-W-H: 4000 x 2410 x 1610 mm Machine was in a hardware store current new price approx. 37.000 euros mint condition - barely used () Special price on request-------------------------------------------------- ---------Robust electro-hydraulic CNC swing cutting shears including CYBELEC CNC touch screen control including CNC electro-hydraulic cutting gap adjustment-------------------------------------------------- ---------Furnishing:- CNC electro-hydraulic swing cutting shear- including CYBELEC CNC touch screen controller, model CybTouch 6”- some functions of the CNC control: Backgauge preselection - X axis Cutting gap adjustment Num ...

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdown holder: 14 Stückno. of strokes: 16 - 24 Hub/minoil volume: 150 ltr.cutting angle: 0.5 - 1.5 °column arm: 350 mmengine output: 11.0 kWweight of the machine ca.: 8300 kgrange L-W-H: 4100 x 2200 x 2190 mm current new price approx. 50.000 euros Special price on request with brand new CYBELEC CNC control-------------------------------------------------- ---------Robust electro-hydraulic CNC sheet metal plate shears slide-guided including CYBELEC CNC control DNC 60 including CNC electro-hydraulic cutting gap adjustment including CNC electro-hydraulic cutting angle adjustment-------------------------------------------------- ---------Furnishing:- CNC electro-hydraulic swing cutting shear- including CYBELEC CNC controller, model DNC 60 (NEW) swiveling, front left- some functions of the CNC control: Backgauge presele ...

sheet width: 3100 mmplate thickness: 8 mmvoltage: 380 Voil volume: 200 ltotal power requirement: 15 kWweight of the machine ca.: 6600 kgdimensions: 4025x2075x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3100 x 6 mm CNC Cybelec with pneum. Sheet metal holding approx. 8000 kg

sheet width: 3000 mmplate thickness: 4 mmtotal power requirement: 11 kWweight of the machine ca.: 5.400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 06,0 mm: -: 0,5-3,0 °: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm: 06,0 mm: -: 0,5-3,0 °: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mmplate thickness: 0.5 - 6.0 mmcutting angle: 1° 30 °no. of strokes: 14 Hub/minback stop - adjustable: max. 1000 mmdown holder: 13 Stückwork height max.: 800 mmControl: EASY-VIEW oil volume: 270 lvoltage: 400 Vengine output: 7.5 kWweight: 6100 kgrange L-W-H: 4010 x 1610 x 1620 mm from a maintenance workshop - good condition () was only used sporadically according to the previous seller New price ~ 35.000 eurosFurnishing:- electro-hydraulic swing cutting shears- KNUTH EASY-VIEW touch CNC positioning control Robust back gauge with high-quality ball screws- Machine frame & knife bar made of sturdy welded construction- The proven swing-cut design allows for a small knife angle for optimal cutting quality and minimal distortion on the workpiece- hydraulically acting hold-down devices- electro-motoric cutting gap adjustment- continuous adjustment of the cutting length for  ...

sheet width: 3050 mmplate thickness: 2,5 mmarm length: 100 mmtable width: 300 mmtotal power requirement: 7,5 kWmachine weight ab.: 2500 kgdimensions: 3800 x 800 x 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 mmcutting angle: 1.8 °no. of strokes: 14 Hub/mindown holder: 15 Stückwork height max.: 805 mmColumn width: 3515 mmControl: CYBTOUCH 8 oil volume: 250 lvoltage: 400 Vengine output: 22.0 kWweight: 9000 kgrange L-W-H: 4110 x 2200 x 2100 mm well maintained condition - built in 2019 () New price ~ 55.000 euros Special price on requestFurnishing:- robust electro-hydraulic sheet metal shears- CNC control unit CYBELEC CYBTOUCH 8 (touchscreen) Anti-reflective, robust color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back gauge Cutting length control via adjustable stroke length Cutting counter Automatic stop of the machine when ...

sheet width: 3190 mmplate thickness: 6 mmdistance between columns: 3250 mmcutting angle: 1,2 °no. of strokes: 32-75 Hub/mincolumn arm: 100 mmback stop - adjustable: 5-1000 mmtable height: 800 mmoil volume: 150 ltotal power requirement: 15 kWweight of the machine ca.: 6200 kgdimensions of the machine ca.: 3500x2000x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3190 mmplate thickness: 6,3 mmdistance between columns: 3200 mmRear feed width: 5-1000 mmstrokes per minute: 30 - 50 cutting angle: 1,2 °control: RAS System 2005 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,83 x3,82 mEquipment / Accessories:- small parts diverter- automatic cutting gap adjustment- scrap separation- return-to-sender- cutting technology: swing cut- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mmplate thickness: 6 mmdistance between columns: 3200 mmthroat: mmback stop - adjustable: 20 - 600 mmdown holder: dimensions: ca. 4010 x 1610 x 1620 mmengine output: 7,5 kWControl: eView weight of the machine ca.: 7,2 tCNC swing cut panel shears3 support arms and 1 angle stopBall rollers in the tableOperating instructions availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h