used Milling Machines for sale

Description: Two machines with one complete set of accessories. Techincal specs: Spindle: W12 Spindle speed: Low gear: 125, 200, 310, 500 rpm Direct drive: 1000, 1600, 2500, 4000 rpmApprox. Onsite Dimension. (l x w x h): 650 x 600 x 1,550 mm, weight approx.: 2,000 kg

x-travel: 300 mmy-travel: 135 mmz-travel: 300 mmspindle turning speed range: 100-2000 U/mintable-size: 590x210 mmweight of the machine ca.: 0.6 tDigital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

universal milling machine ACIERA F3V Year of construction unknown with accessories

Description: Machine with only 1 previous owner Has only been used to mill plastics Brand new spindle bearings! Technical spec: Spindle: ISO30 Spindle speed: Variable 50-3400 rpm Machine table: 800x250 mmApprox. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 1,900 mm, weight approx.: 1,000 kg

Procedures x way 500 mm y way 320 mm z-way 420 mm table 350 x 900 mm Speed 50-3400 RPM. Recording ISO 40

Description: 3 phase A.C. 380 V control voltage 220 V  ,Approx. Onsite Dimension. (l x w x h): 1,300 x 1,250 x 2,450 mm, weight approx.: 1,420 kg

Control Heidenhain TNC 640 Speed [rpm] 15000 Travel X/Y/Z [mm] 800/900/620 Tool pick-up HSK-A63 Spindle: Technology Direct Drive Speed 15,000 rpm Tool holder HSK-A63 NC swivel rotary table: Technology Swivel rotary table with torque drive, Fabr. Kessler A-axis +/- 120° C-axis 360° Clamping surface ø800 mm Table load (max.) 1,000 kg Workpiece dimensions (max.) ø800 x 500 mm General: Tool magazine 2x chain magazine à 32 stations Rapid traverse in X/Y/Z 48 m/min Equipment/accessories: Direct displacement measuring system (glass scales) in all axes Chip Management Chip Conveyor Coolant management IKZ system with filter and high pressure, 18 bar Workpiece Measurement Probe, Heidenhain TS 740 Tool Measurement Laser, BLUM Setup operation Electronic handwheel Other equipment spindle coolers

Description: Machine number: 1860 Spindle speed: 710 - 2840 rpm Operating voltage: 380 V Frequency: 50 Hz Table dimensions: 1200 x 700 mm With 6 grooves Travel distances: X: approx. 900 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with a digital display from the manufacturer HEIDENHAINApprox. Onsite Dimension. (l x w x h): 2,400 x 2,300 x 2,500 mm, weight approx.: 3,000 kg

Description: Table dimensions: 1200 x 700 mm With 6 grooves Travel distances: X: approx. 500 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with a three-axis digital readout from the manufacturer HEIDENHAIN Spindle speed: 45 - 2800 rpmApprox. Onsite Dimension. (l x w x h): 2,200 x 2,000 x 2,400 mm, weight approx.: 4,000 kg

Description: Table dimensions: 1200 x 700 mm With 6 grooves Spindle speed: 45 - 2800 rpm Travel distances: X: approx. 700 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with an ANILAM digital displayApprox. Onsite Dimension. (l x w x h): 2,400 x 2,300 x 2,500 mm, weight approx.: 3,000 kg

Description: BRIDGEPORT Milling MachineApprox. Onsite Dimension. (l x w x h): 1,300 x 1,400 x 2,100 mm, weight approx.: 940 kg

CME FU2 universal milling machine. Table: 1400x300mm. Longitudinal travel: 1050mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. Speeds range: 12. (40-1800rpm). Motor power: 7,5Kw. DRO Fagor for 3 axis.

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

DECKEL Tool Milling Machine – Bed Milling Machine Type. FP 33 (no KLOPP; RECKERMANN) built approx. 1975 Condition: exceptionally good Table clamping surface: approx. 1200 x 640 mm Longitudinal travel: 1,000 mm Transverse travel: 400 mm Vertical travel: 600 mm Speed range: 31.5 – 1,600 rpm. Locker cone: SK 50 Spindle power: 5.5 kW Feed rates: 8 – 400 mm/min. Rapid traverses: 1600 mm/min. Approx. dimensions: 3,000 x 2,000 x 2,600 mm Weight: approx. 4,500 kg The machine is suitable for repair operation; Repair, toolmaking, Machining of large parts with heavy-duty machining Accessories: Digital; Electric hoist load capacity 500 kg, on swivel arm; coolant device; Central lubrication, adjusting shoes Price net plus VAT plus loading costs  ...

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtable-size: 600x260 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minweight of the machine ca.: 0.7 tVisit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- X: 300 mm - Y: 150 mm - Z: 340 mm - Clamping surface: 600 x 210 mm - Speed range: 40 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 1.7 kW - Digital display: 3-axis DITRON Digital - Total power: 1.7 kW - Machine weight: 830 kg - Space requirements (W x D x H): 1.2 x 0.9 x 1.7 m - Condition: good Details good condition, ready for immediate use Accessories Counter holder, dividing head

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

with digital read-out: Activ make: HEIDENHAIN for axes: 3 x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmhorizontal milling head:: tool taper: ISO 40 vertical head:: tool taper: ISO 40 vertical movement of the milling spindle: 90 mmspindle turning speed range: 50-2500 U/minnumber: 18 feed stepless: 6.3-630 mm/minrapid motion -longitudinal/cross/vertical: 1.3 m/mintotal power requirement: 3.7/4.4 kWdimensions of the machine ca.: 1.3x2.0x2.0 mweight of the machine ca.: 1.8 tfixed working table:surface area: 800x460 mmvice: jaw width: 125 mmcollet chuck: 1 number of collets: 11 boring chuck: 1 milling arbors: 7 coolant: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

Machine : Vert. Head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, COVER, from FP3, SK40, with quill stroke 80mm, tool clamp with hydraulics and control panel. swivel, price: 1400,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1600,- Would also have milling spindles - SK30 - SK40

Digital display Heidenhain. Carriage travel range Sledge travel longitudinal (X) 450 mm Sledge travel transverse (Y) 300 mm Sledge travel vertical (Z) 350 mm Clamping surfaces 800 x 400 mm Tool holder SK 40 Quill stroke 100 mm Swivelling vertical milling head ± 90° Speed range 50-2500 rpm Dimensions: Length 1485 mm Width 1475 mm Height 1475 mm Weight approx. 1500 kg

X-axis: 775 mm Y-axis: 250 mm Z-axis: 425 mm Table dimensions: 1100 x 240 mm Spindle Holder: ISO40 Spindle speeds: 48 - 1500 rpm. Equipped with: - Feed on all axes -Vice -Cap - Milling tools - Useful storage - Horizontal spindle Motor power: 2.2 kW Country of origin: Spain Machine LxWxH: 1600 x 1300 x 1600 mm Machine weight: 1200 kg

Description: FIRST model LC 1-1/2 VS vertical milling machine with fast metal headApprox. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 2,100 mm, weight approx.: 1,000 kg

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtable-size: 800 x 390 mmspindle taper ISO: 40 turning speed range - vertical: 50 - 2500 U/minquill stroke: 80 mmspindle drive: 3 KWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 1,6 x 1,6 x 1,95 mNC tool milling machine- Heidenhain TNC 114B- hydr. Tool clamping- Machine light- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Control: Heidenhain TNC 124 Table: 800 x 400 mm Travel distances: X / Y / Z: 500 / 430 / 400 mm Quill stroke: 80 mm Spindle holder: SK 40 Spindle speeds: 71 - 3550 rpm Power requirement: 6 kw Approx. Onsite Dimension. (l x w x h): 1,800 x 1,800 x 1,900 mm, weight approx.: 2,000 kg

Universal milling machine Hermle UWF801 Year of construction ca 1990 Active Digital Display Heidenhain TNC114 Travel: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 50 - 2500 / 18 rpm Feed rate: X/Y: 4 - 1600 mm/min Feed rate: Z: 4 - 1000 mm/min Rapid traverse: X/Y: 1.6 Rapid traverse Z: 1 m/min Spindle drive: 3 kW Weight approx.: 1500 kg Dimensions: LxWxH: 1.6 x 1.5 x 1.8 m Accessories/Equipment: - Angle table - Fixed table (table size: 800 x 395 mm) -Operating instructions - Machine feet - 4pcs tool holders - Chip drip tray - Hydraulic tool clamping - Coolant device - Machine light The machine has been technically tested and is fully functional Spindle concentricity 0.004mm Reversing  ...

Table dimensions: 800 x 220 mm X-axis: 510 mm Y-axis: 450 mm Z-axis: 410 mm Spindle Adapter: ISO40 Speed range: 45 - 2000 rpm. 3-axis digital readout: Heidenhain Equipped with: - Spindle drill quill - Machine clamping - ISO recordings Country of origin: Germany Engine Power: Machine weight: 1400 kg Machine LxWxH: 230 x 230 x 170 cm

Machine type milling machine - universal brand HURON type MU 5 year 1975 control type conventional storage France country of origin France delivery immediately cargo base camp, free truck Technical details x way 1300 mm y path 700 mm z-way 550 mm table size 1500 x 460 mm spindle speeds 15-2500 RPM spindle retainer for SK 40 feed range x - direction 1,6-820 mm / min feed Empire z-direction 1,6-820 mm / min rapid traverse X + Z - axes 2.8 m/min rapid traverse y - direction of 2.8 m / m in power - spindle motor 10 kW total power 14 kW machine weight approx. 4.6 t additional information good condition with 3 axis of DIGITAL HEIDENHAIN SK 40 BUILT IN 1975

x-travel: 860 mmy-travel: 250 mmz-travel: 450 mmturning speed range - vertical: 50 - 1700 U/minmilling-head swivable +/-: Huronkopf spindle taper ISO: SK40 table surface area: 1100 x 250 mmtotal power requirement: 4,2 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 1,7 x 1,4 x 1,8 mUniversal tool milling machine- Digital display- Central lubrication- Coolant system- Vise- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sold without vice and accessories! Recording set, are not included in the price, but can be sold against bidding! The machines can be inspected by arrangement, be tried out and demonstrated! Shipping by Forwarding possible

Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Condition depreciated, ready for use Horizontal manually swivelling spindle Travel X-axis :: 1,500 mm Y-axis travel : 500 mm Z-axis travel: 450 mm Digital Display :3 Axes Glass scales : 3 axes Tool holder: SK 50 Spindle speed: 28-1,400 rpm Input power: 9.2 kW Feed: infinitely variable Coolant basin and pump Tool holders Tools Weight approx.: 5.000kg Dimensions LxWxH approx.: 2,900 x 2400 x 2,400mm Space requirement LxW approx.: 4,400 x 2,400 mm

5 pcs. end mill MK , various , incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End Mills !

x-travel: 600 mmy-travel: 410 mmz-travel: 200 mmturning speed range - horizontal: 30 - 1280 U/minturning speed range - vertical: 50 - 2150 U/minmilling-head swivable +/-: 90° spindle taper ISO: SK40 table surface area: 1000 x 315 mmtotal power requirement: 3,2 kWweight of the machine ca.: 1,44 tdimensions of the machine ca.: 1,6 x 1,7 x 2,1 mUniversal tool milling machine- Digital display- horizontally milling device- Coolant system- Vise- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

x-travel: / mmy-travel: / mmz-travel: ca. 500 mmtable-size: 1400 x 300 mmtool taper: SK40 turning speeds: 35 - 1800 U/minmilling head swivable ca.: 360 °total power requirement: 12 kWweight of the machine ca.: 2,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Macmon M100 milling machine Speeds 40-2000 rpm Travel X-axis 310 mm Y-axis travel 170 mm Z-axis travel 340 mm Tool holder SK 40 tightening thread S20x2 Table clamping surface 600 x 215 mm T-slot size 12 mm Weight approx. 1120 kg Dimensions 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine light - 2-axis digital display - Coolant device -Operating instructions - Machine feet The machine has been technically tested and is in good good condition. Reversing backlash X axis: 0.1mm Reversal clearance Y axis: 0.1mm Reversal clearance Z axis: 0.2mm Price net free loading from stock

Tool holder: SK40 Travel X/Y/Z: 310 / 170 / 340 mm Speed range: Horizontal (16) 40 - 2000 1/min Vertical (16) 50 - 2500 1/min Spindle stroke: 60 mm Feeds: 9 - 450 mm/min Table size: 600 x 210 mm Projection: 133 - 320 mm Motor power: 1.6 / 2.9 kW Connection: 400 V, 16 A Weight approx.: 860 kg Dimensions approx.: 1150 x 1150 x 1680 mm Head swivel: 90° / 90° Equipment: - 3-axis digital display, brand: Elesta - Coolant base with pump - Machine lamp - Emergency stop push button - Drilling pinoles - Modernization 2017 - Operating instructions - Electr. Documentation

Macmon M100E milling machine Speeds 40-2000 rpm Travel X-axis 310 mm Y-axis travel 170 mm Z-axis travel 340 mm Tool holder SK 40 tightening thread M 16 Table clamping surface 600 x 215 mm T-slot size 12 mm Weight approx. 1120 kg Dimensions 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine light - 3 axis Fagor digital display - Coolant device -Operating instructions The machine has been technically tested and is in very good condition. Reversing backlash X axis: 0.15mm Reversal clearance Y axis: 0.25mm Reversal clearance Z axis: 0.2mm Price net free loading from stock

Universal milling machine Macmon M200 (comparable to Deckel FP3) Built in 1971 Machine no. 628/2 X-axis travel 600 mm Travel Y-axis 310 mm Z-axis travel 390 mm Speed range 37-1900 rpm Feed in 3 axes from 7-380 mm/min Rapid traverse in all 3 axes Vertical & Horizontal Spindle Vertical quill and horizontal quill extendable - SK-40 Tightening system S20x2 Rigid clamping table Coolant system Operating instructions 3-axis Fagor digital display (X scale counts twice) The machine has been technically tested and is fully functional. Spindle concentricity 0.002mm Reversing clearance X-axis 0.75mm Reversal clearance Y-axis 0.7mm Reversal clearance Z-axis 0.2mm Footprint LxW: 1500x1500mm Weight approx. 1500kg

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

X-axis: 300 mm Y-axis: 200 mm Z-axis: 350 mm Table dimensions: 520 x 260 mm Tilt and rotatable Spindle Holder: ISO40 Spindle speeds: 40 - 2000 rpm. Spindle stroke: 50 mm Feed: 5 - 500 mm/min. Infinitely variable with rapid traverse Equipped with: -Vice -Turntable - ISO milling tools - Cabinet with accessories - Original operating instructions Country of origin: Germany Machine LxWxH: 1200 x 1300 x 1500 mm Machine weight: 1000 kg

x-travel: 500 mmy-travel: 350 mmz-travel: 380 mmtable-size: 790x360 mmspindle turning speed range: 63-4000 U/minweight of the machine ca.: 1.8 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.