used Precision milling machines for sale

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

AFM DEFUM BACA R 1000 CNC vertical machining center produced in 2016 in Poland is used for precision workpiece machining. Wide machining capabilities, high productivity and an extremely stable design with reliable components make the machine ideal for both series and unit production. In order to achieve the highest precision in the machining process, the spindle unit uses high-accuracy bearings and backlash-free reciprocating screw gears for the X,Y,Z axis feeds. Both spindle rotational speed and work feeds are programmed and controlled steplessly in the perfectly optimised SIEMENS CNC controller. In addition, the controller has many useful functions that maximise machining productivity and allow the full potential of the BACA R1000 CNC machining center to be exploited. The BACA R 1000 milling center also has a wide range of equipment, including a 20-position drum magazine with too ...

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milling mac ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you find in  ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emerg ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency s ...

DECKEL MAHO DMC 50 V CNC machining center was built in Germany in 1995. The machine distinguished by its robust, stable construction is used in precision face and hole machining using rotary tools. The machine is ideal for use in any production facility thanks to its reliable components, such as the high-performance FRANZ KESSLER DMS100.AL.4.FOM spindle and the 20-position tool magazine with automatic tool changing, which guarantee perfect milling precision and accuracy. The DECKEL MAHO CNC vertical machining center weighs 7000 kg. Technical specifications of the DECKEL MAHO DMC 50 V CNC milling machine - work table dimensions (L x W): 700 x 400 mm - feed rates in the X/Y/Z axis: 500/420/500 mm - speed of feeds in the X/Y/Z axis: 1-2000 mm/min - feed motor power in the X/Y/Z axis: 3.5 kW - maximum workpiece weight: 800 kg - maximum spindle rotational speed: 15000 rpm - maximum  ...

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

DECKEL MAHO DMU 60 T CNC vertical machining centre was built in Germany in 1999. The machine performs precision machining of workpieces weighing up to 350 kg, in three axes with feeds of 600 mm (X axis), 525 mm (Y axis) and 500 mm (Z axis). Workpieces are placed on a tilting rotary table with the dimensions (L x W): 900 x 500 mm and they may also be machined horizontally, thanks to the mounted detachable milling head The high-performance spindle of the milling centre rotating at a speed of 12000 rpm, together with the advanced HEIDENHAIN Mill+ numerical control, guarantee excellent precision, quality and a significant reduction in machining time. The milling centre’s tool magazine has a capacity of 25 tools and provides tool changes in a very short time. The CNC milling machine is also equipped with a post-processor with CAD/CAM software and a desktop computer. The total weight of t ...

DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and  ...

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

DUGARD EAGLE 660 VMC CNC machining centre built in 2007 in Taiwan, is used for precision milling, drilling, threading, boring and reaming of workpieces with rotary tools. The machine, with its extensive machining capabilities, is distinguished by its extremely stable base, which provides rigidity and support for the guideways on which the X,Y,Z axes are guided. To ensure a high level of safety, specially designed sliding guards protect the operator from moving parts, coolant and workpiece fragments. All the processes, from tool selection to the machining cycle, are performed fully automatically by the milling centre. The implemented SIEMENS SINUMERIK 810 D CNC control minimises the operator’s handling of the machine, while the capacious 24-position magazine selects the shortest possible access path to the tool. This solution increases production efficiency while significantly reduci ...

EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg

EXERON DIGMA HSC 300 CNC vertical machining center built in 2006 in Germany is a highly reliable machine that can cope with machining even the hardest materials. To achieve this, the compact design including the bed was made of top-quality mineral casting, which effectively dampens any vibrations and ensures optimum dynamics and high precision in the machining process. The EXERON milling center is offered with an intuitive HEIDENHAIN CNC controller, digital axis drives and the REGO-FIX rotary tool clamping system. The total weight of the machine is approximately 5000 kg. Technical specifications of the EXERON DIGMA HSC 300 CNC milling machine - feed rates in the X/Y/Z axes: 300/300/300 mm - rapid traverse: 20 m/min - feed rate range: 2-40000 mm/min - portal travel lateral: 570 mm - portal travel upwards (from spindle end): 360 mm - drive torque: 17 Nm - air pressure: 7 bar - p ...

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330  ...

FEHLMANN PICOMAX 55 CNC 2/3 CNC machining center was built in 2007 in Switzerland. Designed for high-precision machining of workpieces, the PICOMAX 55 CNC 2/3 CNC vertical milling center is offered with an intuitive HEIDENHAIN CNC controller and complete tooling for an SK 32 tool holder. The total weight of the machine is 2450 kg. Technical data of the FEHLMANN PICOMAX 55 CNC 2/3 CNC milling machine - CNC control: HEIDENHAIN CONTROL 530i - T-slot table - tool holder: SK 32 - complete tooling for an SK 32 tool holder - number of T-slots: 5 - operating hours: 50000 h - power: 16 kVA - power supply: 3x 400 V; 50 Hz - weight of machine: 2450 kg

HAAS MINI MILL HE CNC machining center built in the USA in 2001 is distinguished by its incredible milling precision and accuracy, making it ideal for a wide range of applications in any production facility. Made from the highest quality raw materials, the stable, compact design with sliding doors effectively dampens the vibrations generated during machining and provides easy access to the work space. The work space is equipped with a T-slot table, a reliable high-speed spindle and a 10-position tool magazine. To minimise the need for the operator to operate the machine, all machining parameters are programmed in the intuitive HAAS CNC control, which fully automatically executes the machining cycles. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC control: HAAS - work table surface area (L x W): 914 x 305 mm ...

HAAS MINI MILL HE CNC vertical milling center was built in 2006 in the United States. This compact machine, with its emphasis on high productivity and precision milling, is ideal for any production facility, even during the most intensive challenges. Behind the sliding doors there is a large work space equipped with a T-slot table, a 10-position tool magazine and a reliable high-speed spindle. Machining programmes are created in just a few steps in the intuitive HAAS CNC controller, which performs cycles fully automatically and minimises the operator’s need to operate the machine. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC controller: HAAS - feed rates in the X/Y/Z axis: 406/305/254 mm - work table surface (L x W): 914 x 305 mm - maximum workpiece weight: 227 kg - maximum spindle rotational speed: 600 ...

HAAS VF-1 CNC vertical machining center built in 2014 in the United States is distinguished by its excellent milling precision and accuracy, making it able to stand up to even the most intensive production requirements. This highly efficient and reliable machine features a robust, steel design with compact dimensions that effectively dampens any vibrations and ensures maximum stability of the machining process. Behind the sliding door, there is a large work area with a T-slot table, a 20-position tool magazine and a powerful spindle. All tools taken from the magazine are continuously measured by a measuring probe to prevent damage or tool breakage. The HAAS VF1 vertical milling center is also equipped with an intuitive HAAS CNC control that allows the creation of machining programmes in just a few steps. The VF-1 CNC machining center weighs 3539 kg. Technical specifications of the  ...

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

PLOT ELECTRONICS SENTINEL 2030 CNC milling machine was built in Poland in 2014. The machine, which is designed for precision cutting, drilling and engraving of materials, has a lightweight yet rigid design that eliminates any stress and guarantees very fast idling and machining feeds. The offer price includes extensive equipment, consisting of, among others, a reliable BECKER VTLF 2.250 vacuum pump, a high-speed spindle and a state-of-the-art CNC controller. To this date, the SENTINEL SN 2030 milling machine has machined PVC, PP and PE plastic sheets. The total weight of the machine is approximately 2000 kg. Technical data of the PLOT ELECTRONICS SENTINEL 2030 milling machine - CNC control: cncGraF Pro - number of axes: 3 (X,Y,Z) - feed in X/Y/Z axis: 2000/3000/270 mm - approach speed: 500 mm/s - table type: aluminium T-slot table + vacuum table - vacuum pump: BECKER VTLF 2.250/ ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...