| Description: |
Four-sided planing machines WEING Powermat 500 Fenster
used machine
Number of spindles: 6 St.
Working width: 230 mm
Working
height: 120 mm
Length of the planing table: 2500 mm
Feed
motor: 4 kW
Feed speed: 5-30 m/min.
control: CNC
Weinig
Powermat 500 for window
production
-----------------------------------------------
The
machine is currently being completely checked in our
warehouse
Short
summary:
-----------------------------------------------
6
spindles with 8,000 rpm and 7.5 KW
including 6 x
HSK/Powerlock
Window package with glazing bead
removal
Spindles axially and radially CNC controlled
right and
upper spindles with common pneumatic timing for
Glazing bead
removal
Large Powercom control with touchscreen
Detailed
description:
-----------------------------------------------
T
ool arrangement No. 018 for window production
Technical
data:
-----------------------------------------------
Working
width 20 - 230 mm (with tool flight circle 93 - 125 mm)
Working
height 8 - 120 mm (with tool flight circle 93 - 125 mm)
1.
Tool
holder
-----------------------------------------------
First
lower tool holder
Motor with brake 7.5 KW
Diameter:
40mm
Speed 8,000 rpm
including high-performance ball
bearings
Tool flight circle 125 - 180 mm
In conjunction with
PowerLock 93 - 180 mm
Axial adjustment path 17 mm
Table insert
hardened in front of 1st lower tool holder
2. POWERLOCK/HSK
tool
holder
-----------------------------------------------
First
right tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Maximum throat depth 35 mm
Axial adjustment
path for spindle 80 mm
Axial adjustment path for PowerLock 55
mm
Radial adjustment path
Min. tool diameter at stop level 93
mm
Max. tool diameter behind stop level 200 mm
Axial and
radial CNC controlled
3. POWERLOCK/HSK tool
holder
-----------------------------------------------
First
left tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Tool flight circle for straight cutter heads
max. 163 mm
Maximum throat depth 35 mm
Axial adjustment path
for spindle 80 mm
Axial adjustment path for PowerLock 55
mm
Pressure shoe in front of left tool holder,
including 2
side pressure rollers, spring-loaded
Axial and radial CNC
controlled
4. POWERLOCK/HSK tool
holder
-----------------------------------------------
First
upper tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Tool flight circle for straight cutter heads
max. 163 mm
Maximum throat depth 35 mm
Axial adjustment range
40 mm
Axial and radial CNC controlled
5. POWERLOCK/HSK
tool
holder
-----------------------------------------------
Second
upper tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 200 mm
Tool flight circle for straight cutter heads
max. 163 mm
Maximum throat depth 35 mm
Axial adjustment range
40 mm
Axial and radial CNC controlled
6. POWERLOCK/HSK
tool
holder
-----------------------------------------------
Second
lower tool holder
Motor with brake 7.5 KW
Speed 8,000
rpm
including high-performance ball bearings
Tool flight
circle 93 - 225 mm
Maximum throat depth 15 mm
Axial adjustment
range 40 mm
Radial adjustment path
Min. tool diameter to the
table level 93 mm
Max. tool diameter 6 mm below table level 225
mm
Axial and radial CNC controlled
All tool holders with
high concentricity.
Lubrication points for the axial tool holder
movement.
Feed
system
-----------------------------------------------
Frequen
cy-controlled feed, 5 - 30 m/min.
infinitely variable with brake 4
KW
Feed roller in front of 1st lower tool
pneumatically
controlled high-low
Durofer pointed tooth rollers (Weinig
patent)
with depth limiter and self-cleaning
Adjustment path
of the feed rollers opposite
left tool holder, axial 35
mm
Reduction of the center distances between the feed pendulums to
400 mm included
additional feed roller (diameter 95 mm and 140
mm)
and shortened roller spacing
Machine
electrics
-----------------------------------------------
Oper
ating voltage 400 volts
(Voltage range 380 x 420 volts), 50
Hz
Electrical design according to DIN VDE 0113,
electrical
equipment of industrial machines
EN60204, IEC-204-1. Further
electrical regulations
are not included.
Control cabinet (with
control panel) separate from
Machine, distance from control
cabinet to machine: 2.5 m
Machine stand, table and
stops
-----------------------------------------------
Dressing
table 2.5 m long (incl. joining ruler)
Manual Waxilite pump for
table resin removal.
A driven rubber roller in the exit
table,
50mm wide
Pressure rollers and
guides
-----------------------------------------------
Pressur
e rollers from above, spring-loaded
Lateral pressure roller on the
infeed table, spring-loaded
Additional discharge for round bar
production after the second upper spindle
Machine
operation
Window package 1 Powermat
500/018
-----------------------------------------------
1.
right spindle pneumatically axially clocked (55 mm)
1st and 2nd
upper spindle pneumatically clocked axially using a selector
switch
(40 mm), saw blade max. 180 mm.
Discharge to 1st upper
spindle axially manually adjustable (at 0,12,0,18)
Joint control
of the right and top
Spindle (axial cycle) and the glazing bead
removal
via manual selector switch in the control panel
Glass
bead removal to the (last) upper one
Spindle pneumatically
forwards/backwards.
Additional non-powered feed pendulum
after
the last upper spindle to hold down
the square bar
Stops on
the right spindle at G1112123 35 mm
recessed for square strip
removal
Machine prepared for electrical interlinking
for parts
- feedback system including emergency stop linkage
Parts
monitoring
Window package 2 Powermat
500/018
-----------------------------------------------
PowerC
om, touchscreen
Guide ruler to the left spindle 8 mm thick,
pneumatic
controlled according to wood width. Standard rulers are
no longer required,
The standard working width of the entire
machine is reduced
from 230 mm to 200mm. For last production
manually
to adjust to wood width
Motorized axle
adjustments:
5 radial motorized adjustment and positioning of
the tool holders
in conjunction with PowerCom, spindle no.
2,3,4,5,6
5 axial motorized adjustment and positioning of the
tool holders
in conjunction with PowerCom, spindle no.
2,3,4,5,6
Motorized axis adjustment and positioning of the
feed high/low
in connection with the PowerCOM
Central
location of lubrication points on the front of the
machine
PowerCom
control:
-----------------------------------------------
Profi
le and tool data management software
Setting values can be
calculated or saved.
These are shown on the electronic double
displays.
Touchscreen - function for graphically supported
operation
10,000 profile and tool storage spaces
each
Integrated network card for connection to OptiContro or other
PCs
USB connection for manual data transfer
Safety and
soundproofing
-----------------------------------------------
Safety - full fairing
Easily foldable safety hood with window
covers
the entire work area and protects against mechanical
damage
Driven.
When the safety hood is raised, tool holders
become available
and feed is switched off automatically.
With
the CE version, the safety cover can be opened during
not possible
in automatic mode.
Electromagnetic locking of the safety
hood
(only after the tools have stopped, approx. 15
seconds,
the hood can be opened)
The machine comes with CE
mark and the associated
EC declaration of conformity
delivered.
Two interior lights in the safety hood
For cutting
work, e.g. sawing and multiple profiling,
you need suitable
protective
devices.
--------------------------------------
Optional Leitz
tools
--------------------------------------
(technical
data according to the manufacturer - no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2724
|