| Descripción: |
BARMAG
máquina usada
BARMAG AIR TEXTURIZING LINES for the production of artificial grass
yarn, The supply can be split as follows:, - Texturizing machine, -
Barmag twister, - SIMA Winder, - Roblon T5000, - SIMA T2TR, - Fare
Extruder, - Meromat rope machine, These machines are used to texturize
synthetic grass., less than 500 worked hours, as new, texturizers
available, each one consists of:, monofilament texturizing unit for
one yarn, with 2 electrically heated godets, each one with separating
roller, diameter: 132mm - length: 150mm, 1 heating zone per godet,
godet temperature: maximum 180 °c, temperature tolerance on godet
surface: +/- 2 °c, temperature tolerance between godets: +/- 1.5 °c,
separating rollers with ball bearings, with 1 piece texturing jet, for
texturizing of various yarns, heater for compressed air with automatic
temperature and pressure control, cooling drum with blower and air
filter, diameter of cooling drum where the textured yarn is running:
346mm, blower capacity: 2.2 kw, large size air filter, chromium plated
take-off roller with separating roller to supply the textured yarn
from the cooling drum to the winder, precision winding with electronic
gear for changing the winding ratio several times, during winding of
one bobbin for excellent bobbin quality even with the slippery
artificial grass monofilament, fully automatic bobbin change, with
magazine for up to 4 pieces of empty winding tubes, winder with
decreasing bail roll pressure and with decreasing winding tension for,
winding of textured yarn with excellent bobbin quality, winding on to
cheap paper tubes typically used in bcf yarn production, bobbin
dimensions:, inner diameter: 73mm, length of tube: 290mm =/- 0.5mm,
traverse: 250mm, outer diameter of tube: 79mm, deposit of finished
bobbin on to parking position below the winder, signal flash lamp for
alarm of empty tube magazine, switch control box with number of
inverters for each texturing position, 1 inverter for each unrolling
position, total 2 pieces, 1 inverter for each heated godet, total 2
pieces, 1 inverter for cooling drum, 1 piece, 1 inverter for take-off
roller, 1 piece, 4 inverters for automatic winder, total 4 pieces,
total number of inverters G637941 per position, total 10 pieces, make
of inverters: siemens, each 2 positions consist of the following
units:, 1 unrolling tower with 2 unrolling positions, each unrolling
position is yarn tension, controlled, each unwinding position suitable
for following tube dimensions, flanged bobbins with:, tube inner
diameter: 90mm, diameter of flanges: 260mm, tube length: 310mm,
traverse: 280mm, -------------------------------------, Barmag
twisting with 36 spindles., -------------------------------------,
Rope Making machine brand MEROMAT for the production of 4 srand rope
up to 16 mm, ------------------------------------, Winder from SIMA
with 4 groups of 15 heads each, ------------------------------------,
4 Twisters ROBLON T5000, ------------------------------------, 3 SIMA
twisters T2 TR, ------------------------------------, 1 monofilament
extruder FARE for monofilament.,
------------------------------------
seller offer No. resale
GESF100
|