| Descripción: |
Máquinas para enderezar DUNKES HR 63/TR 25/HRW 25
máquina usada
material width: 3000 mm
material thickness: 0 mm
no. of
straightening rolls: 0
total power requirement: 22 kW
weight
of the machine ca.: 14,5 t
dimensions of the machine ca.: 7,5 x
2,5 x 2,9 m
D U N K E S
Hydraulic Straightening System for
Flat material and Section Material
With Straightening Press (
C-Frame ) Model HR 63/TR 25/ HRW 25
Year 1990 ( H 89-1960
)
____________________________________________________________
Consisting of:
Straightening C-Frame Press, Model HR 63,
Pressure 63 to, Stroke of
Piston 160 mm, Straightening speed
up/down 25/75 mm/s, Daylight 550 mm,
Distance to column 620 mm,
sensitive Straightening stroke via handlever with
turret-stop,
Measuring device for accurate straitening via a
lightbar
Horizontal Straightening Device Model HRW 25, Pressure 25
tons attached on
right hand side of vertical Press, straightening
stroke 160 mm, straightening speed fwd/bwd
57/10 mm/s, designed as
Pressbow which moves in both directions against a
straightening
tool to avoid the turnovers of workpiece during straightening
process, 4 tool posts front and backside/left and right with a
distance of
600 mm, Handlever for stroke movement.
Torsion
straightening device for twisting the section material up to a power
of 25.000 Nm,
Resistance Moment 69.000 mm³, twisting force
max. 320 N/mm², workpiece
glamping 320 kN,
mounted on left
hand side of Press as a integrated unit. The left handed
slide
can be moved approx.. 3000 mm and is equipped as the clamping station
for the workpieces and the right handed unit is for clamping and
twisting
hydraulically this workpiece up to 35 ° Display to see
the torsion on a
lightbar.For the crossmovement/loading of
workpiece is a roller chain
available
Straightening Bed for
placing and for moving the workpiece towards to the
straightening
devices,
consisting of conveyor roller tables left and right on
the press with each
approx. 3000 mm length,rollers can be lifted
pneumatically for easier
transportation. Between the two beds is
a working gap for the vertical
straightening cylinder with two
adjustable counter steadies with
exchangeables jaws. Mechanical
measuring device to check H1241166 tension of
workpiece built on
presstable.
The 3 Straightening positions are electrically
separated, so only one
position can be used on a time. Various
pressing tools in different shapes
and lengths available. Also a
roller support for straighten cylindrical
shafts or tubes up to
1.800 mm length to place it on the a.m. straightening
bed.
Oil tank capacity for hydraulic oil approx. 500
liters
Total electrical load approx. 22 kW - 400 V - 50
cycles
Weight approx. 14,5 to,
Outside
dimension: 7,5 x 2,5 x 2,9 m height
Condition :
good to very good – can be soon inspected under power.
Delivery : ex stock – as inspected here in stock
Payment : net – after completion of
contract
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1049-734635
|