Prensa de chapa en caliente con calentamiento de aceite OMC PL 90s

máquinas para el procesado de madera / máquinas para chapa de madera
exigir más fotos
añadir a lista de favoritos
enviar consulta
vista de impresión
Número de artículo: 164722610 Cantidad: 1 Fecha: 26.10.2024
Precio: 28,781 EUR
Fabricante: OMC
Modelo: PL 90s
Tipo de máquina: Prensa de chapa en caliente con calentamiento de aceite
Descripción: Prensa de chapa en caliente con calentamiento de aceite OMC PL 90s

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO

TECHNICAL CHARACTERISTICS
Platens dimensions 3000x1300 mm
Stroke 400 mm
Type of stroke Upstroke design (from bottom to top)
Type of platen Assembled platens with coil and aluminum covering
Total thrust 90 ton on 80% of the surface
Pressing Cylinders N° 6 cylinders ø70 mm
Specific Pressure 2.05 kg/cm2 on 100% of the surface
2.56 kg/cm2 on 80% of the surface
Loading and Unloading Side3000 mm side
Type of Heating system Oil boiler ? maximum temperature = 120°C
Heating system specificationsElectric boiler 18 kW
Opening Automatic by timer
Control Board Standard
Power supply 400V, 50Hz, 3ph
Security device Safety rope around the press
Red emergency Button
Two Hand control
Normative CE norms

Press Structure
The press structure is made of fe 430 beams assembled and welded together.
The structure of both the fixed and movable platen is made of fe 430 beams assembled and welded together.
The press is equipped with rack and pinion guide system to ensure a perfectly parallel movement during the closing/opening of the platens.

Assembled platens with coil and aluminium covering
Maximum oil Temperature 120°C
Maximum specific working thrust 3-5 kg/cm²
Maximum thrust of heating Fluid: 2 bar
Our assembled platens with coil + aluminum covering are completely built in our metal workshop. Each coil, before being installed in the platen, is submitted to a strict leak test.
A 3 mm calibrated sheet is placed on top of the coil.
The platens are covered with aluminum sheet, that gives the platens an excellent surface finish and optimal heat propagation.

Hydraulic system
?the hydraulic system consists of a double stage unit with submerged pump to reduce the noise and lubricate the rotating parts.
?quick closing/opening pump (high delivery- low pressure 35 L/min), pressing pump (low delivery-high pressure 1.6 L/min).
?2 hp electric engine
?the hydraulic unit is equipped with the following control/safety valves, installed on the tank:
- maximum pressure valve: prevents to have too high pressure in the hydraulic
system in case of electric or electronic control fault
- pressure holding valve (retaining valve)
- low releasing pressure valve (pre-releasing valve). It avoids dangerous ram hits inside
the system
- oil release control magnet

Control panel and Electrical system

The pressing parameters can be managed from the control board that is equipped with the following switches/ gauges:

- temperature gauge to control platens temperature
- Pressure regulating gauges and automatic pressure recovery system
- general on/off switch
- two hand safety switches to close the press
- Timer for automatic opening with its own switch activates the automatic
or manual opening of the platens after the work cycle.
- off/on switch for heating resistance that switches the boiler off W1114335 when the
set temperature is reached to restore the temperature, if there is any
temperature decrease, in order to save power consumption.
- heating pump on/off switch

Safety systems
- Timed bimanual control for press closing
- Safety rope on the four sides of the press
- Platen locking device for maintenance
- Protection carter for the pinion/rack units
- Safety stickers and warnings
- Use and maintenance manual
- the press is compliant with CE standards

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO
Price: ? 28.781,00

Optionals:

Control panel and Electrical system
Touch screen display - Programmable Logic Controller
Colour full touch screen 7? display specifically designed to set the following:
- temperatures
- pressing time
- daily setting of the heating system
- automatic switching off of the heating system
once the set temperature is reached and
automatic recovery of the temperature
- new system for the automatic setting of the
pressure
- option to save historical data/parameters
- diagnostic system
Price: ? 1.212,00

Mylar sheeting on 2 platens:
Price: ? 651,00

Sensor to check the platen parallel stroke
Price: ? 1.108,00

Electrical exclusion of 2 cylinders + Sensors to check the parallel stroke
Price: ? 2.097,00

No. 1 intermediate platen
Price: ? 4.510,00






seller offer No. resale 1110260
Máquina en stock: No
Seller-item-No.: 1110260