3169 results

similar results found in category máquinas cribadoras

Número de artículo: 128022386
Glasierer for frozen seafood. Total 3 units in different version The devices are made completely of stainless steel is composed of different layers with spray nozzles, which apply a thin film of water on the frozen product and vibratory plates. Z. B. Glasierer 1 for approximately 1000 kg per hour product run Working width (bandwidth) 120 cm Length 275cm, width 175cm, height 142cm with 4 vibration levels, which apply a permanent to ensure the product.
Número de artículo: 128022384
Year 1998 – Complete of: With Co-Pilot system – 80 Cicles/min – Foil unwinding controlled from display unit – Motorised adjustment of the embossing head – Max case size 660x405mm, min format 170 x 100 mm, foil feeder with 2 step motor controlled foil feed rollers – infeed conveyor with DBA – 1 matrix for the embossing dies to be glued on – 2nd Matrix for setting up outside machine
Número de artículo: 128022383
Year 2001 - Pre-stacking conveyor – infeed conveyor with case – bending machine DBA – Foil feeder with two pairs of foil feed rollers – Straight delivery belt – Technical specifications: Max. open cover : 660 x 405 mm – Min. open cover : 170 x 100 mm – Pressure surface : max. 420 x 355 mm – Pressure : max. 350 KN – Capacity : up to 80 embossings/min
Número de artículo: 128022380
Year 2006 – Complete of: With Co-Pilot system – 80 Cicles/min – Foil unwinding controlled from display unit – Motorised adjustment of the embossing head – Max case size 660x405mm, min format 170 x 100 mm, foil feeder with 2 step motor controlled foil feed rollers – infeed conveyor with DBA – 1 matrix for the embossing dies to be glued on – 2nd Matrix for setting up outside machine
Número de artículo: 128022379
Book Production Line Kolbus BF 527 – year 2007 – size max: 375 x 305 x 80 mm size min: 100 x 100 x 2 mm – mechanical speed: 60 cycles/min. Complete of: 12 gathering stations ZU 804L – Copilot system with touch-screen monitor – gluing station – excluding premelter – gluing station with circulation and premelter – backlining and headbanding station – pressing station – Viscosity control device for 2 stations – Hotmelt nozzle gluing unit for joint gluing (motorized height adjustment) – case pr ...
Número de artículo: 128022374
Year 1994 /2010 Complete of: Tandem EJ – SCS TRIM & PERF 600 DUPLEX – Automatic – Feeder for cases – Case bending station – Foil unwind – Tandem version – Two in line embossing machines – Tray delivery – Specifications are subject to manufacturers changes in similar models – Maximum open case size : 660 x 405 mm. – Maximum open case size : 170 x 100 mm, Embossing area: 420 x 355 mm, Pressure: 35 T – Maximum mechanical speed: MAX. 80 cases/min – Full specifications on request – Mach ...
Número de artículo: 128022373
Year 2000 – Max. Speed 10.000=/H – 21 gathering stations model ZU 816 – with size max cm 52 – 2 nipping units – gauzing and headbanding end sheeter – stream cover feeder – milling and roughering station – back and side glue – cold glue – splitting saw – trimmer HD 151 P – stecker Rima system.
Número de artículo: 128022372
Working hours only 7000 hours Sheet size max 750×1050 mm – min 350×400 mm Gripper margin 10 – 18 mm Max speed 7500 S/H Max pile height feeder 1000 mm Max cutting pressure 300 tons Material weights – min 80 grams max 1400 grams Non stop feeder – double sheet control – sheet size pre-seliction – non stop in delivery Register system in feeder and die cutting station – center line system
Número de artículo: 128022371
-
15.000 €
country-de DE
This plant takes product at a height of 250cm an Edelstahlbin ca 400 kg and the tipping mechanism brings the product into a drip pan filled with water, from where it is transferred to the production line. The plant was already professionally dismantled and stored on pallets in a dry production hall. Lifting station: weight approx. 1200kg, length 180cm, width 140 cm, height 250 cm Tray: Weight: about 1500 kg, length 200 cm, width 140 cm, height 110 cm
Número de artículo: 128022369
Year 1998 – Complete of: Air table – Photo cells – Computer E.G. control – Original programs – Manuals and tools
Número de artículo: 128022366
Complete of: Air table – Photo cells – Original programs – Manuals and tools
Número de artículo: 128022365
Year 2007 – Complete of: Air table – Photo cells – Original programs – Computer – Manuals and tools
Número de artículo: 128022360
Automatic Book Sewing Machine Smyth F180 4D with 09 gathering stations size cm 32x51 - Mechanical speed max. 180 cycles/min. - Fully automatic machine - Table delivery with automatic chains - 4 4 opening suckers and Lap opening system - Touchscreen color panel control - Quick setting software - manuals and tools.
Número de artículo: 128022358
Year 2007 – Complete of: Perfection Model – Pallet feeder – Navigator system for foling settings – 06 Buckles – 03 knives – anti noise hoods – Additional KZ folding unit 32 pages – Shingle delivery
Número de artículo: 128021719
Polar DCC-M - the cutting (punching) for labels year 2010 IML - in mould min. size of 50 x 50 mm (46 x 46 mm) maximum size 170 x 250 mm (166 x 246 mm) pile height min. 35 mm, 120 mm punch tool height min 65 mm, 145 mm pressure min. 7 kN, maximum 50 kN capacity 8 cycles/min demand for compressed air 670 l / min. good condition
Número de artículo: 128021712
OVERVIEW: Brand: Index Model: C65 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2007 Production hours: 69666 Location: Czech Republic Origin country: Germany GENERAL DATA: Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 840D CNC main language: German CNC language customizable: yes MOVEMENT: X-AXIS movement: 110 mm Y-AXIS movement: 70 (+40/-30) mm Z-AXIS ...
Número de artículo: 128021707
-
15.000 €
country-de DE
Main dimensions: 4450 mm B = L = 2980 mm H = 3789 mm Table length: 2000 mm Clamping surface: B = 500mm L = 2000 mm Take-up ranges: X-axis = 1620 mm Y-axis = 525 mm z-axis = 795 mm Speeds of the milling spindle: area 22, 4... 1120 RPM feeds in the axes x, y, z can be set in the steps of 1mm / min Input via F command (mm/min) 10... CNC 4000 Rapid traverse rate (mm/min) 8000 Power spindle (kW) 18.5 Torque per feed spindle (nm) 49
Número de artículo: 128021702
Used Bihler MC42 multislide wire/strip punching and forming machine. Year of mfg 2000. German origin. Bihler P-CNC 400 control. Complete with GSE 4.2 tapping, B1000 welding system, 2 x transformers 70 KVA, Raziol lubrication, various forming slides (radial & linear type) and press station.
Número de artículo: 128021698
Technical data: -Sanding belt dimensions 2000 x 75 mm -Surface grinding opening 530 x 75 mm -Abrasive belt speed 34 m/s -Contact plate B 75 / D 200 -Pulley B 75 / D 200 -Drive 400 V / 2880 rpm / 3 kW -Working height adjustable approx. 500-1200 mm -Space requirement approx. B 500 x H approx. 1250 X 1200 mm -Weight approx. 130 kg
Número de artículo: 128021687
Technical data: -Microprocessor control + manual function -Automatic feed unit supplies length 500 mm - band saw blade dimension 3150 x 25.4 x 0.9 mm -2 speeds N 40 / 80 m / min -maximum clamping possibility 325 mm - MITRE adjustable up to 60 ° left - section - 90 ° around 260 mm -square 250 mm -flat 320 x 200 mm -45 ° left + right around 230 mm -flat 240 x 200 mm -60 ° left around 150 mm -flat 140 x 160 mm -Drive: 400 V / 1.5 / 1.8 kW -Coolant system - S ...
Número de artículo: 128021677
Número de artículo: 128021670
Número de artículo: 128021668
Número de artículo: 128021665
Número de artículo: 128021663
Número de artículo: 128021655
400 to Engel Spritzgiessmaschine holmlose mit nur ca. 38.900 Betriebsstunden und integriertem Engel ERC Roboter. Diese Maschine komplett funktionsgepruft 2007ausgeliefert und kann bei uns unter Strom wird besichtigt werden!
Número de artículo: 128021651
Holmlose 300 to ENGEL Spritzgiessmaschine MIT 55 mm Schneckendurchmesser. Zu dieser Maschine gehört ein Engel Roboter und ein Werkzeug-Ladekran. Diese Maschine wird von uns komplett Ontvangst 2007ausgeliefert und kann bei uns unter Strom besichtigt werden!
Número de artículo: 128021642
Illig RV 53 used machine We are pleased to offer the following machine subject to prior sale Machine thermoforming Illig RV 53 Year: 1990 Model: RV 53 Technical Specifications Forming area (VxH): 500x350 Depth of draw: 100 mm Material thickness (min): 0,10 mm Material thickness (max): 1,40 mm Feeding systems:Roll fed Lower mobile table PRICE 22500,00€ LOT We have other thermoformeuse illig for sale do not hesitate to let us know your request. BEST REGARDS, Math ...
Número de artículo: 128021234
Uberholte 200 to ARBURG Spritzgiessmaschine mit neuer Plastifizierung. Schneckendurchmesser 55 mm. Diese Maschine kann bei uns unter Strom vorgefuhrt werden.
Número de artículo: 128021194
Injection molding machine Angel's 330 / 65 Year of construction: 1994 Screw diameter: 40 mm Bdmtxg3dny Clamping force: 650 kN
Número de artículo: 128021190
-
BN 480 €
country-de DE
Griffin DV25/2-2-2 Metal band grinding machine including various sanding belts Technical data: Type: DV25/2-2-2 Wide contact roller: 50 mm Engine power: 1,3 kW Voltage: 380V speed: 3000 rpm unsorted sanding belts and countless (see picture) A VAT invoice is created for you.
Número de artículo: 128021178
Número de artículo: 128021176
Número de artículo: 128021174
Zeiss measuring machine C400 - was never used! Ogjwu0e
Número de artículo: 128021172
ROTO T 2/96 THE ROTARY AUTOMATIC MOLDING MACHINE ON 96 STATIONS FOR CASTING OF POLYMERIC TRAFFIC JAMS OF THE MADE FOAM STRUCTURE (FOR WINES AND FOR HARD ALCOHOLIC BEVERAGES), CAPABLE TO WORK AT THE SAME TIME WITH 2 VARIOUS MATERIALS / COLORS Eqb8ve2 Main technical characteristics â?¢ A rotary table with 48 workstations in two levels, everyone with a double holder â?¢ holders with linear + rotary pneumatic opening / closing, calculated on 96 single compression Arnold from stainless steel, wi ...
Número de artículo: 128021164
ARBURG 320-210-750 year 1987 Nxm22qs Screw 40 mm 1 piece spare control cabinet with control and 6 piece replacement heaters as replacement parts.
Número de artículo: 128021162
Injection moulding machine ARBURG 221 E / 170 P Bdmseidbmn Year of construction: 1977
Número de artículo: 128021160
Injection moulding machine ARBURG 220 M 350 90 Idonv9yqk
Número de artículo: 128021158
Injection moulding machine ARBURG 305-210-700 Year of construction: 1994 Ekdheuh Clamping force: 700 kN
Número de artículo: 128021156
Injection moulding machine ARBURG 170 CMD 150 45 Year of construction: 1990 Clamping force: 150 kN Ss9vag
Número de artículo: 128021154
EDM of Charmilles 330F Idktp7v2q Year of construction: 1999 The machine is fully functional and can be seen under power.
Número de artículo: 128021152
Injection molding machine boy 22 S Year of construction: 1993 Screw diameter: 28 mm Clamping force: 220 kN Ptt3lm Shot weight Max 44 PS / PE
Número de artículo: 127990634
-
BN 1.200 €
country-de DE
Surface grinding machine, magnetic plate 300 x 500 mm, functional
Número de artículo: 127960240
Krauss Maffei KM 1600 - 8100/2700 MX BJ. 2006 Hours of operation: 20.200 h Cylinder injection A: 105 mm 4546 cm³ Cylinder injection q: 90mm 2036 cm³ Replacement cylinder syringe q: 80 mm 1433 cm³ Syringe A core pull 5 hydr. / Pneum. 3. Syringe F core trains 5 hydr. / Pneum. 3. 36 mould heating zones
Número de artículo: 127952972
DETTAGLI TECNICI â?¢ Sezione minima: Ã? 12 mm â?¢ Tondo max: Ã? 220 mm â?¢ Quadro e rettangolo max: tutte le sezioni inscritte in un Ã? 280 mm â?¢ Differenza massima tra i of Ihab 180mm â?¢ Dimensione MIN lato: 20mm â?¢ Dimensione MAX lato: 200mm â?¢ Carico massimo: 35 kg/m â?¢ Lunghezza barra M Automatico IN caricabile: 2600 mm Vrxxrk0 â?¢ Lunghezza MAX barra caricabile automatico: 12500 mm (car ...
Número de artículo: 127952678
Thread cutter thread cutter thread lathe Manufacturer: WMW TYPE: 2869 YEAR: 1987 Technical data see rating plate Many new cutting blades/dies More details can be found in the images or on request. Pick up in Neubrandenburg, delivery possible. Loading possible. More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
Número de artículo: 127952676
Thread cutter thread cutter thread lathe Manufacturer: MAGFBA Seifhennersdorf TYPE: GA 52 YEAR: 1966 Technical data see rating plate Many new cutting blades/dies More details can be found in the images or on request. Pick up in Neubrandenburg, delivery possible. Loading possible. More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
Número de artículo: 127952663
year of production - 2012 hours of work - 20370 type - RG250UCS packaging capacity - 1000/500/260 ml efficiency - 5000 p / hour
Número de artículo: 127952660
Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping
Número de artículo: 127952651
Strapping machine SMB neo; very good condition; cleaned and checked. Band width 5 mm. Frame size 640x440mm; Tension adjustable; Soft power; Foot switch; Mobile. We are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse. Tours and demonstrations are possible by appointment at our premises. Gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)