104 results

Número de artículo: 142804562
SPEROTTO RIMAR CONVEYOR STEAMER FOR FABRIC TYPE SG-0, YEAR 1992 WORKING WIDTH 1900 MM LENGHT 12 M WITH TWO STEAMING ZONES
Número de artículo: 142627392
3 x IMPIANTI CONTINUO (ISOTEX) COATING HEAD. YEAR 1990 WW 1.700 MM KNIFE OVER ROLLER TYPE (OVEN NOT INCLUDED)
Número de artículo: 142627387
CALATOR UNROLLING MACHINE ROLLER WIDTH 2.700 MM PORTABLE. TO BE USED AS UNROLLING MACHINE FOR KNITS IN FRONT OF A COMPACTOR OR ANY OTHER MACHINE. WITH E+L METAL DETECTOR
Número de artículo: 142307721
1 MARIO CROSTA shearing machine type CMB/1, year 1990, for knittings, terry and fabrics, shearing spirals width 220 cm, shearing cylinder equipped with 22 SCHLENTER shearing spirals
Número de artículo: 142255826
1 TECNINOX / THIES high temperature HTHP rope dyeing machine, type ECOSOFT 140/1 PL, year 1999 machine with 1 tube, capacity up to 200 Kg, indicated for terry and bedspreads dyeing due to big nozzle diameter dyeing temperature up to 140 ºC, equipped with inside plaiter, SEDOMAT 3500 dye cycle controller,
Número de artículo: 142255824
1 LAMPERTI raising machine type GB, year 1988, wire with 230 cm, 36 raising rollers, can run open width or tubular, updated with inverter to the main motor
Número de artículo: 142255820
1 MAT type Supervelox Dry, multi-purpose rope washing / scouring / softening / fulling / bulking / tumbling machine, year 1990,
Número de artículo: 142255818
2 MEZZERA high temperature jiggers type Celsius 143, year 2003, roller width 200 cm, working width 180 cm, electronic jigger, maximum batch diameter 1150 mm, maximum dyeing temperature 140 ºC, SETEX 838 dye cycle controller, with 2 add vats (1 with mixer)
Número de artículo: 142255816
1 THEN sample high temperature jet dyeing machine, type EF-HT 15 , capacity 10 to 15 kg (according to the weight and composition of the fabrics) , year 1982 (overhauled in 2004), maximum dyeing temperature 140 ºC, machine equipped with filter, Then DCE dye cycle controller with PH-control, with addition vat
Número de artículo: 142255810
2 spare calander rollers for a RAMISCH type RK 440H calander face roller width 340 cm consisting of: 1 brand new TEFLON roller face roller width 340 cm, never used, face roller width 340 cm, diameter 550 mm, shaft diameter 150 mm, traction side length 580 mm from end of TEFLON face, non-traction side length 470 mm from end of TEFLON face, total length 4450 mm 1 roller same as above but already used and with need of grinding, diameter 500 mm each roller packed in 1 wooden box
Número de artículo: 142255806
1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder
Número de artículo: 142255804
1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1989 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled
Número de artículo: 142255800
1 MATHIS continuous dyeing and finishing range for elastic and non-elastic ribbons type MTFJ-B, machine can work as pad-steam, pad-thermosol and pad-dry and/or pad-steam combined with thermosol roller width 200 mm working width 170 mm speed 1-14 m/min. drying temperature up to 200 ºC speed and tension control through frequency converters installation composed of (please observe red numbers above components in attached drawing): Pos. 1 MATHIS type PRE feeding unit with beater to keep ribbons loose at entr ...
Número de artículo: 142255794
1 VALD HENRIKSEN atmospheric dyeing jigger type VH SUPER 1200/2800, width 280 cm, working width 260 cm, maximal batch diameter 1200 mm, year 1988, controller type J16S,
Número de artículo: 142255792
1 BABCOCK gas heated hotflue installation type QUADRO-DRY, year 1989, roller width 2.000 mm, working width 1.800 mm, 2 thermal chambers, linear speed up to 75 m/min.
Número de artículo: 142255786
1 KUSTERS 2 bowl calender, type 212.50-2600, year 1992, 260 cm face roller width, 240 cm working width, upper bowl steel thermal oil heated diameter 400 mm, lower roll racolan S-roll diameter 435 mm,
Número de artículo: 142255776
1 DANTI PAOLO raising machine type 28/2400, year 1996, working width 240 cm, 28 raising rollers
Número de artículo: 142255774
1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm
Número de artículo: 142255756
1 COMET raizing machine type P8/2, width 260 cm, 28 raising rollers, machine equipped with PIV drives and frequency inverter to the main motor
Número de artículo: 142255754
1 MARIO CROSTA raising line composed of 2 raising machines type MC/50, year 1980, wire width 340 cm, each raising machine with 32 raising rollers = total 64 raising rollers
Número de artículo: 142255752
1 OSTHOFF SENGE singeing machine type PK97-VP-IK, year 1998, installed in 2000 roller width 300 cm, working width 280 cm, pre and after brushing, dezising and bleaching field
Número de artículo: 142255750
1 RAMISCH KLEINEWEFERS 2-bowl rolling smoothing and high glaze calender type NIPCO-I model RKK280, 2600 mm face roller width, 2400 mm working width, year 1987, top bowl steel chromed (electro hot water heated) diameter 360 mm, bottom bowl Racolan (NIPCO-roll original ESCHER WYSS) diameter 500 mm, electrical heated,
Número de artículo: 142255746
1 MATHIS laboratory HT beaker dyeing machine, type LABOMAT 2 BFA-24, with 1 set of 24 beakers each with 200 ml capacity (1 of the beakers with temperature sensor), maximal dyeing temperature 140º C, dye cycle controller MATHIS type Uniprogrammer
Número de artículo: 140855168
TUBETEX TUBULAR COMPACTING MACHINE MODEL PAK NIT II PN 156-S YEAR 1991 WIDTH 1.200 MM METAL DETECTOR EXIT WITH PRECISION FOLDER
Número de artículo: 138748856
GERBER DISCONTINUOUS MERCERIZING, YEAR 1980 WORKING WIDTH 3.200 MM EXIT BY A-FRAME BATCHER AND FOLDER
Número de artículo: 138512021
KUSTERS CALENDER MODEL 212.50-1800, ROLLER WIDTH 1.850 MM, YEAR 1982 TWO BOWLS CONFIGURATION: TOP BOWL CHROMED BOTTOM BOWL RACOLAN S-ROLL GAS HEATED S-ROLL IN PERFECT WORKING CONDITION
Número de artículo: 138425615
Número de artículo: 138292638
MONFORTS SANFOR MACHINE, YEAR 1987, COMPRISING: - J SCRAY ACCUMULATOR AT ENTRY AND AT EXIT - WEKO HUMIDIFIER - STEAMING DRUM - PUMP STENTER - MONFORTS SANFOR UNIT, RUBBER BELT - PALMER - COOLING CYLINDERS - EXIT BY A-FRAME BATCHER CURRENTLY HAS A RUBBER BELT OF 1800 MM WIDE, TO WORK FABRICS UP TO 1700 MM WIDE BUT CAN WORK WITH A RUBBER BAND OF 1900 MM WIDE, TO WORK FABRICS UP TO 1800 MM WIDE
Número de artículo: 138292632
THIES HT JET DYEING MACHINE MODEL TRD. YEAR 2002 APPROX. CAPACITY 150 KG 1 ROPE SETEX PROGRAMMER MODEL SECOM 737XL HOT WATER STORAGE TANK
Número de artículo: 135891097
MCS BEAM DYEING FOR FABRIC, YEAR 1973 WORKING WIDTH 2.000 MM MANUAL PROGRAMMER TIME/TEMPERATURE INTERNAL DIAM. 1.100 MM CAPACITY 2.000 L TWO BEAMS AND ONE TROLLEY
Número de artículo: 135891095
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1978 WORKING WIDTH 3.200 MM THERMOELETTRONICA PROGRAMMER CT 401 INTERNAL DIAM. 1.100 MM CAPACITY 5.000 L ONE BEAM AND ONE TROLLEY
Número de artículo: 135891090
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1979 WORKING WIDTH 3.200 MM THERMOELETTRONICA PROGRAMMER CT 401 INTERNAL DIAM. 1.100 MM CAPACITY 5.000 L TWO BEAMS AND ONE TROLLEY
Número de artículo: 135891083
MCS BEAM DYEING FOR FABRIC, YEAR 1970 WORKING WIDTH 2.000 MM THERMOELETTRONICA PROGRAMMER CT 411 INTERNAL DIAM. 1.120 MM CAPACITY 3.000 L TWO BEAMS AND ONE TROLLEY
Número de artículo: 135840409
BETA DYEING PADDER, ROLLER WIDTH 2.100 MM, YEAR 1989 DYEING UNIT FULLY UPGRADED WITH MIXING KITCHEN AND DOSING PUMP IN PERFERCT WORKING CONDITION
Número de artículo: 135727172
MCS HT JIGGER DYEING MACHINE, MODEL COMBY, YEAR 1997 DIAMETER 1.100 MM HIDROLIC DRIVE TERMOELETTRONICA PROGRAMMER
Número de artículo: 135727166
OSTHOFF SINGEING RANGE, ROLLER WITH 1.800 MM, YEAR 1983 HIGH ENTRANCE WITH GUIDERS SINGEING UNIT WITH 2 OSTHOFF BURNERS BRUSHING DESIZING TANK AND PADDER EXIT BY A-FRAME BATCHER PREPARATION TANK WITH 2 MIXERS DUST AND SPARKS COLLECTION
Número de artículo: 135688283
LISA SUEDING MACHINE FOR KNITS AND WOVEN MODEL 3E-DP, YEAR 2003 HIGH ENTRANCE WITH BIANCO DOGAL SPREADING DEVICE ROLLER WIDTH 2.100 MM SUEDING UNIT WITH 3 CARBON BRUSH CYLINDERS EXIT BY FOLDER AND A-FRAME BATCHER DUST COLLECTOR WITH 7 SLEEVES
Número de artículo: 135688279
CIBITEX SANFOR FOR WOVEN AND KNITS, YEAR 2002 ENTRANCE WITH UNWINDING STATION FOR A-FRAME AND CORINO DOGAL SPREADING DEVICE STEAMING DRUM SHRINKING UNIT: RUBBER WIDTH 1.900 MM, CYLINDER WIDTH 2.400 MM. WITH THE EXISTING RUBBER BELT THE WW IS 1.800 MM, INSTALLING A WIDER RUBBER BELT THE WW WILL REACH UP TO 2.300 MM PALMER FOR FIXATION WITH DRUM DRYER, CONVEYOR BELT FOR ACCUMULATION AND COOLING CYLINDER EXIT BY A-FRAME BATCHER
Número de artículo: 135395942
BABCOCK STENTER. YEAR 1998 WORKING WIDTH 2.350 MM 5 CHAMBERS GAS HORIZONTAL CHAIN, PIN AND CLIP ENTRANCE WITH ACCUMULATOR, 2 VACUUM SLOTS, 3 CYLINDER BETA PADDER MAHLO ORTHOPAC WEFT STRAIGHTENER WITH SCAN BRIDGE AT THE EXIT EXIT WITH COOLING ZONE, FOLDER AND A-FRAME BATCHER SUITABLE FOR WOVEN AND KNITS
Número de artículo: 135216527
TEPA ATMOSPHERIC JIGGER MODEL JTE 1500 ROLLER WIDTH 2.800 MM YEAR 2003 ELECTRONIC DRIVE MAX. DIAM. 1.500 MM BATCHING ARM FOR LOADING AND UNLOADING ON A-FRAME ADD TANK WITH MIXER
Número de artículo: 135216114
RAMISCH-KLEINEWEFERS CALENDER MODEL RKK 260 NIPCO "I" ESKHER WISS, YEAR 1987 WORKING WIDTH 2.100 MM, ROLLER WIDTH 2.200 MM TWO BOWLS CONFIGURATION: TOP BOWL CHROMED STEEL ELECTRIC HEATED AND BOTTOM BOWL NIPCO WITH RECOLAN SLEEVE SEAM AND METAL DETECTOR, METER COUNTER PRESSURE 60 TN TWO WATER REFRIGERATED CYLINDERS TO COOL DOWN THE FABRIC BEFORE ROLLING, EXIT BY A-FRAME BATCHER ONE SPARE RACOLAN SLEEVE IN A BOX MACHINE STILL WORKING IN THE FACTORY
Número de artículo: 134680070
STORK ROTARY PRINTING MODEL RD IV 1850/7/8. YEAR 1985 7 COLORS INSTALLED, POSSIBLE 8 GAS HEATED DRYER, DOUBLE PASSAGE EXIT BY FOLDER SUITABLE FOR WOVEN AND KNITS MACHINE STILL IN PRODUCTION
Número de artículo: 134051365
KELLER DORIAN EMBOISSING CALENDER. YEAR 1994 ROLLER WIDTH 1.700 MM - 2 CYLINDRES CONFIGURATION: TOP CYLINDER STEEL ENGRAVED OIL HEATED BOTTOM CYLINDER IN HARD RUBBER TOTAL EMBOSED CYLINDERS: 1 IN THE MACHINE PLUS 3 IN BOXES OIL BOILER INCLUDED
Número de artículo: 133790722
MCS HT JET DYEING MACHINE MODEL MF2 JHT. YEAR 2000 - CAPACITY 200 KG - 2 ROPES - THERMOELECTRONICA PROGRAMMER TYPE CT 301- LAN - TWO ADD TANKS WITH MIXERS AND HOT WATER RECOVERY TANK
Número de artículo: 133790720
MCS HT JET DYEING MACHINE MODEL MF 200/4. YEAR 1997 - CAPACITY 400 KG - 4 ROPES - THERMOELECTRONICA PROGRAMMER TYPE CT 301- LAN - TWO ADD TANKS WITH MIXERS AND HOT WATER RECOVERY TANK
Número de artículo: 133790718
MCS HT JET DYEING MACHINE MODEL EUROFLOW. YEAR 2001 - CAPACITY 400 - 500 KG - 3 ROPES - TERMOELECTRONICA CT81 PROGRAMMER
Número de artículo: 133669280
HELIOT TUBULAR PADDER, MODEL EXP 146, YEAR 1991 ENTRANCE FROM ROTATING PLATFORM DETWISTER TWO PADDERS, ONE FOR EVEN, ONE FOR IMPREGNATION EXIT BY FOLDER
Número de artículo: 133558638
THIES HT JET DYEING MACHINE MODEL TRD. YEAR 1998 APPROX. CAPACITY 450 KG 3 ROPES WITH VARIO NOZZLE. POSSIBILITY TO WORK 2 OR 3 ROPES SETEX PROGRAMMER
Número de artículo: 133558636
THIES HT JET DYEING MACHINE MODEL TRD. YEAR 1998 APPROX. CAPACITY 450 KG 3 ROPES. POSSIBILITY TO WORK 2 OR 3 ROPES SETEX PROGRAMMER
Número de artículo: 133558632
THIES HT JET DYEING MACHINE MODEL TRD. YEAR 1995 APPROX. CAPACITY 300 KG 2 ROPES. POSSIBILITY TO WORK WITH 1 OR 2 ROPES SETEX PROGRAMMER MODEL 737
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)