3587 results

Número de artículo: 127582573
Up to 8000 rpm, with CNC control SIEMENS 810 D, tool holder SK 40, 20-fold tool changer, with rotary tilt table 640 x 500 mm, travel paths X 500 mm, Y 450 mm, Z 400 mm, B - 5/+ 110, C 360°, accuracy X Y Z 0.001 mm, B and C 0.001°, accuracy 8 µ, positioning accuracy 20 µ, feed X Y Z 20 - 2000 mm/min, rapid traverse 12 m/min, speed adjustable up to 10000 rpm, motor max. 13 kW, with NC-vice GRESSEL GRIPOS, jaw width 100 mm, Tool Tast probe Heidenhain TT140 with Blow-off device.
Número de artículo: 127577965
Table length: 1500 mmTable width: 660 mmLongitudinal X: 1270 mmCross Y: 660 mmVertical Z: 610 mmPositions ATC: 40  Positions APC: 0  CNC Brand: _Unknown / OtherCNC Model: Ultimax 4 MACH-id   4088 MAKE      HURCO TYPE        VMX 50 YEAR       2007 SPECIFICATIONS X - Travel      1270 mm Y - Travel      660 mm Z - Travel      610 mm bed / plano / portal / moving column     VMC Controll  & ...
Número de artículo: 127567058
-
33.300 €
country-fr FR
Machining center - vertical HARTFORD VMC 1270 bearing no 1105-02485 category machining center - vertical make HARTFORD type VMC 1270 year 2011 State second-hand machine CNC CNC FANUC I OM storage France country of origin Taiwan Lieferzei t January x trail 1270 mm y route 635 mm z route 635 mm table size 1370 X 600 mm speed range - milled 60-8000 RPM CNC FANUC I OM power - Milling spindle 15 kW BT 40 tool holder number of tool magazine stations 30 stations feed range 1-10000 mm / min speed: 30 m/min total power 3 ...
Número de artículo: 127577967
Table length: 1500 mmTable width: 660 mmLongitudinal X: 1270 mmCross Y: 660 mmVertical Z: 610 mmPositions ATC: 24  Positions APC: 3  CNC Brand: _Unknown / OtherCNC Model: Ulitmax 4 MACH-id   4089 MAKE       HURCO TYPE         VMX 50 S YEAR        2002 SPECIFICATIONS X - Travel      1270 mm Y - Travel        660 mm Z - Travel         610 mm bed / plano / portal / moving column  ...
Número de artículo: 127566952
-
BN 290 €
country-ch CH
Drilling Schweizerische Maschinenfabrik Oerlikon Built in 1936 Weight approx. 1100 kg L x W x H: 160 x 80 x 220 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Número de artículo: 127577961
travel: 2000-4000 mmlength: 600 mmwidth: 500 mmspindle head according to: 0spindle turning speed range: U/minswitching steps: 0feeding velocity x-Axis min./max.: mmy-Axis min./max.: mmControl: BOSCH Typ 3osa
Número de artículo: 127566920
CNC universal machining center Manufacturer: Coarse Type: G-350 Year of construction: 2011 CNC control: Siemens 840 d SL Traverse paths: X/Y/Z = 600 x 770 x 675 mm Pallet changer: 400 x 400 mm Tool changers: 99-fach + 10 separate courses Tool holder: HSK A63 Probe Hexagon Chip conveyor Weight: 12,000 kg Reference No.: WEI1300 Machine suitable for: 5-sided machining Space holes and angles Forms and flow profiles Precision parts
Número de artículo: 127577947
core drilling diameter max.: 4-60 mmbore depth: 2000 mmControl: Sinumerik 840D main spindle: output: 17 kWspindle turning speed range: 1000 - 8000 U/mintool magazin:: 30 Plätze tool taper: HKS-63A x-axis: 3000 mmy-axis: 1660 mmz-axis: 1000 mmw-axis: 2000 mmclamping table: 2000 x 2200 mmtable load: 10.000 kgfeed - X: 0,1-10 m/min.feed - X: 0,1-10 m/min.feed - Z: 0.1-10 m/min.feed w-axis: 0-15 m/min.weight of the machine ca.: ca. 36 tdimensions of the machine ca.: 9,68 x 8,7 x 4,19 mDrilling technique 1- single  ...
Número de artículo: 127566877
Rotational speed: 44-1500/min, drilling diameter steel/ cast iron: 3-40/ 3-55mm.
Número de artículo: 127577939
x-travel: 762 mmy-travel: 406 mmz-travel: 508 mmCNC-control: table-size: 914 x 356 mmmax. table load: 1360 kgspindle taper ISO: 40 spindle turning speed range: 8100 U/minfeed stepless: 1650 mm/minrapid traverse: 25,4 m/mindrive capacity - spindle motor: 22,4 kWtool change unit: 20 Pos. coolant: chip conveyor: Spiralförderer kWvoltage: 400 Vtotal power requirement: kVAweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,50 x 2,35 x 2,60 cm m
Número de artículo: 127566863
X -, Y -, Z-travel: 1500 x 550 x 500 mm maximum table load: 800 kg The machine is 40 clamping in good technical condition, after prior arrangement, testing ability, maximum 8000 U / min, ISO
Número de artículo: 127577941
x-travel: 1016 mmy-travel: 508 mmz-travel: 635 mmCNC-control: table-size: 1219 x 457 mmmax. table load: 1588 kgspindle taper ISO: 40 spindle turning speed range: 8100 U/minfeed stepless: max. 16500 mm/minrapid traverse: 25,4 m/mindrive capacity - spindle motor: 22,4 kWtool change unit: 20 Pos. coolant: chip conveyor: Spiralförderer voltage: 400 Vtotal power requirement: kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 3,60 x 2,35 x 2,60 m
Número de artículo: 127566825
GENERAL Project No.: 904591 Number: 1 PCs. Manufacturer: CHIRON Type: FZ 15 FX Magnum high speed Control: HEIDENHAIN iTNC 530 Year of construction: 2012 State of preservation: second-hand machine Stories about: 1 layers DESCRIPTION MILLING Travel in X 730 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 60/60/60 m / min Direct measuring system Tool holder HSK-A 63 Maximum speed milling spindle 18000 1/min Maximum power with ED 10-40 / 100% 58/42 kW Maximum torque a ...
Número de artículo: 127577221
bore capacity in steel (diameter):40 mmarm length:1200 mmworkpiece height max.:450 mmtotal power requirement:3 kWweight of the machine ca.:2,5 tdimensions of the machine ca.:1600 x 2300 x 2600 mmspeeds:35 - 1800 U/minfeed::0,075 - 0,15 - 0,3 - 0,45 - 0,6 mm/UDocuments:vorhanden
Número de artículo: 127566817
GENERAL Project No.: 904814 Number: 1 PCs. Manufacturer: HELLER Type: MCP-H 250 Control: Uni-Pro CNC 90 Year of construction: 1998 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 800 mm Travel in Y 800 mm Travel in Z 710 mm Maximum rapid traverse in X/Y/Z 36/36/36 m / min Maximum feed speed in X/Y/Z 36/36/36 m / min Direct measuring system X/Y/Z Tool holder SK 50 Maximum speed milling spindle 6000 1/min Maximum power with ED 10-40 / 100 ...
Número de artículo: 127577235
bore capacity in steel (diameter):40 mmarm length:1200 mmworkpiece height max.:450 mmtotal power requirement:3 kWweight of the machine ca.:2,5 tdimensions of the machine ca.:1600 x 2300 x 2600 mmspeeds:35 - 1800 U/minfeed::0,075 - 0,15 - 0,3 - 0,45 - 0,6 mm/UDocuments:vorhanden
Número de artículo: 127566809
GENERAL Project No.: 904843 Number: 1 PCs. Manufacturer: Long Type: MC 500 Control: Siemens 840 D solutionline Year of construction: 2008 State of preservation: second-hand machine Machine a (hours): 1,000 DESCRIPTION MILLING Travel in X 500 mm Travel in Y 500 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 40/40/40 m / min Direct measuring system X/Y/Z/A/B Tool holder HSK 50 E Maximum speed milling spindle 30000 1/min Maximum power with ED 10-40 / 100% 16,6 kW Disc tool Magazine 30 ...
Número de artículo: 127577111
x-travel:800 mmy-travel:600 mmz-travel:700 mmcontrol:MAZATROL 640M-5X power capacity - milling spindle:30 / 25 kWtool taper:SK 40 Tool changer:30 pos.rotary table diameter:900 x 600 mmturning speeds:35-18.000 1/minTorque:221 / 146 Nmtable load:800 kgrapid traverse:50 m/min:83 kVAweight of the machine ca.:11,6 tdimensions of the machine ca.:3,5 x 2,95 x 3,01 m5-axis (not simultaneously) machining center, NC-round-table, B-axis, internal coolant supply 15bar, chipconveyor, 3-D touch probe RENISHAW, el. handwheel, ap ...
Número de artículo: 127566779
GENERAL Project No.: 904874 Number: 1 PCs. Manufacturer: MÃ?GA Type: center R 4530 Control: Fanuc 0i-MD Year of constr.: 2016 State of preservation: second-hand machine Control a (hours): 1.953 Spindle a (hours): 179 DESCRIPTION MILLING Travel in X 450 mm Travel in Y 300 mm Travel in Z 300 mm Maximum rapid traverse in X/Y/Z 48/48/60 m / min Maximum acceleration in X/Y/Z 1.5/1.2/1.1 g Tool holder BT 30 Maximum speed milling spindle 10000 1/min Maximum power with ED 10-40 / 100% 5,5  ...
Número de artículo: 127574516
number of spindles: 2,bore capacity in steel (diameter): 32 mm,bore stroke: 275 mm,bore capacity in cast iron: 50 mm,drill spindle - Morse Taper: MK 5,spindle throat: 315 mm,spindle distance: 600 mm,headstock adjustment: 280 elektrisch mm,feed:: 0,11 - 1,73 / 9 step mm/U,feed:: automatic + manuell beide Spindelköpfe,spindle speed:: 32 - 1400 / 12 step U/min,distance between table/spindle: min./max. 200/710 mm,table surface area: 950 x 450 mm,table adjustment: 250 per Hand mm,total power requirement: 13 kW,weight  ...
Número de artículo: 127553295
CNC vertical machining center TOS Mitt tools, chip conveyors, Bucher TV 1000 type Contur HEIDENHAIN TNC 407 Table 1250 x 850 mm Traverse path X / Y / Z: 1000 / 610 / 760 mm Spindle retainer for SK 40 Tool magazine 40 times 13 kw Spindle speeds 20 - 8000 U / min Weight 6000 k
Número de artículo: 127574518
number of spindles: 3,bore capacity in steel (diameter): 25 mm,bore stroke: 200 / 140 / 140 mm,drill capacity in cast iron: 31 mm,drill spindle - Morse Taper: MK 3 + MK 4,headstock adjustment: 280 mm,feed:: automatic + manuell alle 3,table surface area: 1900 x 450 mm,table adjustment: vertical 250 per Hand mm,distance between table/spindle: min. 200 max. 700 mm,total power requirement: 8,6 kW,weight of the machine ca.: 2,4 t,dimension coolant device: 0,7 x 0,28 x 0,38 m,dimension machine approx.LxWxH: 2,1 x 1,0 x  ...
Número de artículo: 127553277
Technical data: Drilling capacity in steel ST 60 15 mm Drilling capacity in steel ST 60 18 mm Short spindle MK 2 5 drill spindle speed approx. 225-4300 U/min Spindle stroke 80 mm RADIUS 190 mm Column diameter 65 mm Table size 300 x 240 mm 400 x 400 mm-worked base plate with T - slot Maximum distance table / base plate to the spindle 600 mm Emergency stop buttons Space requirement approx. B H 400 x 1000 X 800 mm Weight approx. 110 kg Keyless drill Chuck
Número de artículo: 127566487
Número de artículo: 127553271
-
45.000 €
country-de DE
A CNC machining center of manufacturer Johnford is available here. The machine is fully operational. Technical data: Manufacturer: Johnford Type: VMC-2000SHD Year of construction: 2000 Control: Fanuc 18 M Table area: 2200 x 1000 mm H9kixs933 Table load: 4800 kg Traverse paths x-Y-Z: 2050-1100-800 mm Spindelaufnhame: BT 50 Spindle rotation: 10-4500 RPM Spindle motor: 25 HP(30min) / 20HP(const) 2 reduction stages Rapid traverse x-Y-Z: 15-15-12 m / min Feed: 1-8000 mm / min Magazine capaci ...
Número de artículo: 127566498
Número de artículo: 127553168
Built in 2005 Power-on hours approximately 27.000 h Control Siemens 840 d ShopMill Traverse paths X 1100 Y 600 Z 600 mm Table size 1200 x 600 mm Table load 1,000 kg Spindle speeds 20-8,000 rpm 24 x tool changer Chuck SK40 Chip conveyor IKZ factory cavity cooling 20 bar with filter system Preparation radio Blum measuring switch
Número de artículo: 127561987
x-travel: 800 mmy-travel: 500 mmz-travel: 600 mmcontrol: FANUC 15 M turning speeds: 6000 U/min0: 7,5/5,5 kWrapid traverse: 24 m/mintool change unit: 30-fach total power requirement: 24,6 kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 3,5x3,0x2,8 mdouble table: swarf conveyor:
Número de artículo: 127538045
3-axis CNC machining centre Fanuc Robodrill-T21i FL CNC Fanuc -use only plastic and aluminum has been processed! - from 1st hand x: 700 mm y: 400 mm w: 330 mm Spindle: 11 kW Tool holder BBT 30 (big plus) RPM 150-24000 rpm. Tool magazine with 21 stations Tool diameter of 80 mm Tool length of 210 mm Tool weight of 2 kg Rapid traverse 54 m / min Feed 30 m / min Weight: 2200 kg Accessories: 4th axis 24000-er spindle with Renishaw Measurement of workpiece and tool measurement length Cons ...
Número de artículo: 127561979
x travel: mmy travel: mmz travel: mm--------------------------------------------------: WORKING RANGE -CUBIC-: - number of processing axes (excl parallel axes): 4 - X-axis travel: 560 mm- Y-axis travel: 560 mm- Z-axis travel: 560 mmTABLE: - table surface (left-right): 400 mm- table surface (front-back): 400 mm- workpiece load (max): 400 kg- - positioning/indexing: 1 °MILLING SPINDLE / HEAD: - spindle revolutions (min): 50 /min- spindle revolutions (max): 14000 /minTOOL MAGA ...
Número de artículo: 127537227
: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 ...
Número de artículo: 127558891
x-travel:600 mmy-travel:430 mmz-travel:460 mmcontrol:MSC 501 (FANUC 18)table-size:900 x 500 mmtable load capacity:500 kpspindle turning speed - stepless:12.000 1/minmain drive:22 / 18,5 kWmax. torque on the spindle:167 Nmnumbers of tools in magazin:30 BT 40 max. tool length:300 mmmax. tool diameter:80 (125) mmtotal power requirement:31 kWweight of the machine ca.:5200 tdimensions of the machine ca.:2,15 x 2,48 x 2,7 mCoolant through spindle interface form B: chip conveyor: 4th axis Nikken CNC 200: Machine in excell ...
Número de artículo: 127537171
-
125.000 €
country-de DE
Spindle working diameter: 200 mm Travel X-axis: 8000 mm Travel Y-axis: 3150 mm Spindle speed: 1 - 630 / min. Spindle travel (W): 2000 mm Ram travel (V): 1600 mm Spindle taper: ISO 60 Main power: 75 kW Skoda boring machine is in good condition. It is equipped with rotary table Skoda E25 - load capacity 25t - clamping surface 2000mm x 2000mm, milling head, two T-slot floor plates 400mm x 1885mm x 11200mm (one piece: 400mm x 1885mm x 5600mm), lifting device on the column - load capacity 750 kg.  ...
Número de artículo: 127547804
spindle diameter: 110 mmx-travel: 2000 mmy-travel: 1600 mmtable-size: 1250 x1600 mmW-axis (spindle longitudinal): 630 mmz-axis: 1250 mmspindle turning speed - stepless: 5 - 1400 U/minfeeds infinitely variable: 1 - 9999 mm/minspindle motor: 39 kWcontrol: Heidenhain 426 B total power requirement: 80 kWweight of the machine ca.: 30 tdimensions of the machine ca.: m: : : : : overhauled in 2002: new Hydrulic, Electric, CNC Control- CNC Control Heidenhain TNC 426B- SK 50 Tool
Número de artículo: 127537133
No. 2630: 1 gebr. CNC vertical milling machines and drill / jig boring machine Fabr. BURKHARDT & WEBER Type 120 NCW HYOP Retrofit / overhauled in 2000 with HEIDENHAIN TNC 426 PB ARB.-ber.: 1250 x 630 x 560 mm Power: 44 kW Accessories: fixed table / table 1200 x 710, additional table top height 200 mm,. 36-Fach tool changer magazine, coolant system / coolant. HEIDENHAIN - probe / probe TS 630 -the pictured magnetic clamping table is not included! -Miscellaneous: spindle ISO 50, revs / speed range 3 ...
Número de artículo: 127547652
-
subasta de maquinaria usada RESALE 400 €
country-it IT
Weight approx.: 800 kgDimensions (l x w x h) approx.: 1800 x 850 x 2100 mmDescription: Serial number 846 type SRL12/30, capacity 1200 kg. Forks length 1150 mm, with battery charger brand LEVER. Batteries to be overhauled. See photo
Número de artículo: 127522015
HORIZONTAL MACHINING CENTER TSUGAMI MA 3 H - 10 P - 07-08-006 Shipping time: immediately Number: 07-08-006 Manufacturer: Tsugami Type: MA 3 H - 10 P MACHINE DATA Year of construction: approx. 1986 L x W x h: approx. 4000 x 2400 x 2400 mm Weight: 7000 kg Very good condition - maintained top (Image) TECHNICAL DATA Control: Fanuc 11 - M Procedures: X - axis: approx. 330 mm Y - axis: approx. 250 mm Z - axis: 400 mm Table size: approx 300 x 300 mm Pallet changing station: Number of pa ...
Número de artículo: 127547440
-
subasta de maquinaria usada RESALE 650 €
country-fr FR
Weight approx.: 1200 kgDimensions (l x w x h) approx.: 1450 x 800 x 2250 mmDescription: Spindle range from 40 to 1600 rpm
Número de artículo: 127521995
COLUMN DRILLING MACHINE ALZMETALL AX 3 SV - 02-04-047 Shipping time: immediately Number: 02-04-047 Manufacturer: Alzmetall Type: AX 3 SV MACHINE DATA Construction year: CA 1981 L x W x h: approx. 800 x 400 x 1800 mm Weight: 300 kg Good general condition TECHNICAL DATA Maximum drilling diameter in steel: approx. Ã? 28 mm Maximum drilling diameter in cast: approx. Ã? 35 mm Chuck: MK 2 Speed range: approx. 80-1125 U/min Throat depth: approx. 290 mm Column diameter: app ...
Número de artículo: 127547442
-
subasta de maquinaria usada RESALE 500 €
country-fr FR
Weight approx.: 1200 kgDimensions (l x w x h) approx.: 1650 x 1550 x 2000 mmDescription: Drilling machine, Table 1100 x 300 mm, traveling distance: 700 x 300 x 500 mm
Número de artículo: 127521884
with changing table, control TC-soft dialog control. X away the 420 mm Y away 300 mm Z away 250 mm maximum installation height 450 mm Table surface 500 x 300 mm Spindle speeds of 6-6000 RPM. Spindle retainer for SK 30 (BT 30) Turret stations 10 5 kW approx. Weight 2,4 t Accessories: large number of tool holders, hydraulic, coolant system.
Número de artículo: 127547492
-
subasta de maquinaria usada RESALE 80 €
country-it IT
Weight approx.: 100 kgDimensions (l x w x h) approx.: 600 x 700 x 1600 mmDescription: With tabletop size 200 x 200 mm and stroke approx. 400 mm. See photo
Número de artículo: 127521880
Drilling and milling machine WEBO Gradua 30 Drilling capacity in steel (diameter): 5 - 30 mm x travel: 450 mm y travel: 380 mm Total power consumption: 1.4 / 2,2 kW Machine weight approx.: 1.100 kg Space requirement approx.: 1,000 x 1,400 x 2,900 mm Transmission: 85-2,000 rpm Spindle diameter: 72 mm Depth: 700 mm Throat depth: 300 mm Spindle mount MT: 3 T-slots: 3 x 16/25 mm Table size: 700 x 300 mm Spindle RPM: 85/170/250/355/475/710/1000/2000 RPM Engine speeds: 705/1425 Accessories available
Número de artículo: 127547072
-
subasta de maquinaria usada RESALE 1.300 €
country-fr FR
Weight approx.: 1400 kgDimensions (l x w x h) approx.: 1300 x 1000 x 2950 mmDescription: Multi-spindle drill, Stroke 1000 x 250 x 350 mm, With tools
Número de artículo: 127465124
Boring mill Tischbohrwerk Manufacturer: Union Type: BFKF 130/1 Year of construction: 1986 CNC control: Sinumerik Traverse paths: X/Y/Z = 2,000 x 1600 x 800 mm Spindle diameter: 130 mm Spindle stroke: 630 mm Distance from spindle Center - clamping surface: 1.600 mm maximum workpiece weight: 8.000 kg Clamping surface: 1.600 x 1,250 mm Tool holder: Iso50 Weight: 25,700 kg
Número de artículo: 127547597
-
subasta de maquinaria usada RESALE 350 €
country-fr FR
Weight approx.: 2700 kgDimensions (l x w x h) approx.: 1900 x 800 x 2580 mmDescription: Drilling machine, Arm 1250 mm
Número de artículo: 127465097
TOOL ROOM MILLING MACHINE COVER FP 3 GS WITHOUT - 07-07-233 Shipping time: On request Number: 07-07-233 Manufacturer: Lid Type: FP 3 GS without . MACHINE DATA Year of constr.: 1978 approx. L x W x h: approx. 2000 x 1600 x 1900 mm Weight: 1500 kg Very good condition - without TECHNICAL DATA Digital display: 3 - axes - digital display new Procedures: X - axis: 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Table clamping surface (solid angle table): approx. 800 x 420 mm ...
Número de artículo: 127547109
-
subasta de maquinaria usada RESALE 800 €
country-it IT
Weight approx.: 1500 kgDimensions (l x w x h) approx.: 1800 x 700 x 1900 mmDescription: Reach approx. 1100 mm, cube tabletop size 500 x 400 x 320 mm, with clamping vice. See photo
Número de artículo: 127465095
Mitsui Seiki HU40AHersteller: Mitsui Seiki ToyodaTyp: horizontal HochpraezisionsbearbeitungszentrumModell: HU40ABaujahr: 1999Land: JapanTechnische details: x Trail: 560 mmy way: 560 mmz way: 560 mmSteuerung: FANUC model 15i MAPalettenbahnhof places: 6no of available pallet: 2Spindelmotorleistung: 11 kWDrehzahlbereich: 80-12000 U/minVorschubbereich: 0.1-20000 mm / minInnere coolant: 70 barGewicht about: 11000kgAbmessungen (Lxwxh) approx.: 4800 x 2800 x 2800 mmSpaenefoerderer with Coolant tank and PumpenTechnische Do ...
Número de artículo: 127547117
-
subasta de maquinaria usada RESALE 2.000 €
country-it IT
Weight approx.: 8000 kgDimensions (l x w x h) approx.: 2600 x 1000 x 3100 mmDescription: Reach approx. 2000 mm. See photo
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)