265 results

Número de artículo: 127465150
Pttmoa Drying plant Manufacturer: Plastic systems Year: 2014
Número de artículo: 127377664
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 300 mm
Número de artículo: 127277767
Refrigeration units for 105 kW (90.344 kCal) manufacturer: BLUEBOX, Piove di Sacco model: ZETA ST 422 installed power: 51.4 kW protection rating: IP 44 refrigerant: 407C. Max.charge: 2 x 26 kg Max.refr.press. : 23.8 bar temperature: 25 ° C (ambient) weight: 1,142 kg pump: 3 kW (16-36 m³/h) water flow: approx. 25 m³/h vol min.water. : 450 l
Número de artículo: 127377666
coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 mvoltage: 230 VSuction depth: 300 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 127199266
There are 14 machines available (1) 12x MORETTO F3 F40: connected load: 1kW, weight: 11kg (2) 2x MORETTO F5: output: 80kg/h, operational pressure: 4-8bar, connected load: 1kW.
Número de artículo: 127377668
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 250 mm
Número de artículo: 127199264
There are 25 machines available, capacity: 2l, static negative pressure: 19kPa, connected load: 0.9kW.
Número de artículo: 127377670
coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 mvoltage: 230 VSuction depth: 150 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 127188078
Robot WITTMANN W743, 2011, 3 axis numerical
Número de artículo: 127377672
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 120 mm
Número de artículo: 126991114
-
BN 4.400 €
-
Suitable for solvent-based products. Maximum temperature: 200 ° C Capacity: 13.5 kW incl. Hood and 6 Einlegerosten External dimensions: Height: 190 cm Depth: 90 cm Width: 82 cm Internal dimensions: Height: 100 cm Depth: 60 cm Width: 60 cm
Número de artículo: 127377676
coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 (230) V0: 1/2 mmSuction depth: 150 mm
Número de artículo: 126991112
-
BN 2.400 €
-
Maximum temperature: 250 °C Power: 9.3 kW Nominal temperature: 250 °C incl. Exhaust Hood and 8 tins External dimensions: Height: 180 cm Depth: 100 cm Width: 123 cm Internal dimensions: Height: 150 cm Depth: 68 cm Width: 95 cm
Número de artículo: 127377934
coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 60 l/mintotal power requirement: 0,16 kWvoltage: 230 V0: 1/2 mmSuction depth: 150 mm
Número de artículo: 126917096
Handling for a 200t machine for sale, what is ready packed for about 8 months with us. Geiger handling Easy control BJ2002 Here are the data to do this. Geiger handling with control box and remote control, safety fence, base plate for mounting on an ARBURG and conveyor belt
Número de artículo: 127377936
coolant capacity: 60 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 230 V0: 1/2 mmSuction depth: 180 mm
Número de artículo: 126750908
New device, stock item for special price Chiller, air cooled 1.98 kW, MTA type: TAEevo TECH MINI M05 M.T.A. S.p.a.. TAEevo TECH MINI M05 are small compact water cooling chiller, which are suitable for indoor installation. Including buffer tank (open system, not a pressure accumulator) and built-in circulation pump. Cooling capacity kW 1.98 Coldwater-temp. Exit / entry: 7 / 12 °C Flow rate m³/h 0.34 available pump pressure 3.37 bar Ambient temperature °C 32 Refrigerant R 410A Electrical data: Vol ...
Número de artículo: 127377690
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 150 mm
Número de artículo: 126738643
Dry air dryers for plastics of brand of Somos including funnel colour: Year of construction: 1988 completely overhauled: 2018 Control type: PSW 230V Total final value: 18kW Additional heaters: 4 x 1kW dry air flow: 140 m³/h Width: 160cm depth: 80cm height: 210cm weight: 350kg Storage location: Germany
Número de artículo: 127377692
coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 (230) V0: 1/2 mmSuction depth: 250 mm
Número de artículo: 126738639
Dry air dryers for plastics of brand of Somos Color: Year of construction: 1988 completely overhauled: 2018 Control type: PSW 230V Total final value: 18kW Additional heaters: 4 x 1kW dry air flow: 140 m³/h Width: 160cm depth: 80cm height: 210cm weight: 350kg Storage location: Germany
Número de artículo: 127377698
coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 mvoltage: 230 VSuction depth: 200 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 126408540
-
3.000 €
-
The compressors were to last properly in use. The corresponding electric drive motors are sold separately. 4 times the price of scrap! According to the responsible of this operation these compressors were a year in ausserbetriebnahme still revised. Some few spare parts which are not listed but are in addition. If you are interested, the images of these components be set. Please inquire. I try to answer your questions.
Número de artículo: 127377700
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 180 mm
Número de artículo: 126304209
Número de artículo: 127377702
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 200 mm
Número de artículo: 126077853
Two Polydryer granulate dryers, CS2 / 6 kW and CS 3 / 9 kW. Year 1985 and -86.
Número de artículo: 127377704
coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 mvoltage: 230 VSuction depth: 120 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 126077851
Número de artículo: 127377706
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 350 mm
Número de artículo: 125823234
used Length: 20,000 mm 3 floors with input and output Belt width: 180 mm Profile dimensions approx.: 180 x 40 mm Heated zones: 4 Unheated zones: 2 Heating: gas-fired Belt speed: 2-30 m / min Burner temperature approx.: 300 ° C Extrusion: 1,025 mm
Número de artículo: 127377708
coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 (230) V0: 1/2 mmSuction depth: 300 mm
Número de artículo: 125761696
New machine in stock for special price! 176 kW, MTA chiller air-cooled, type: Aries FREECOOLING ASFC 751N M.T.A. Spa. The Aries FREECOOLING ASFC 751N are compact water chillers suitable for outdoor installation (from -15 ° C to + 43 ° C) with shell and tube evaporators, two scroll compressors, compressor shut-off valves, electronic expansion valve, crankcase heater, phase monitoring, P3 double pump , 400 liter tank, condenser filter and control and switch cabinet. Cooling capacity (kW): 176 Kaltwassertemp ...
Número de artículo: 127377710
coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 mvoltage: 230 VSuction depth: 180 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 125735796
-
2.750 £
country-uk UK
This is a double core pull auxillary power pack manufactured by Rexroth. These power packs are used to provide a double core pull hydraulic circuit to a moulding process when not originally fitted to the machine. One of the most common uses of these power packs is when used with an all-electric moulding machine. An all-electric machine wouldn’t have an hydraulic circuit available to be used with core pull and it would not have an oil cooler. Some manufacturers do offer this as option on all-electric machine ...
Número de artículo: 127378026
coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 mvoltage: 230 VSuction depth: 85 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 125299670
VERTICAL HANDLING with servo motor description According to the employer, the handling was determined not came for a job. So was the device used to me. To save space the unit apart built then to then put it in the Rregal There not partially assembled photos see special price
Número de artículo: 127378030
coolant capacity: 16 l/minCapacity: - Wattconveying height: 2,5 total power requirement: 60 Wattvoltage: 220 Vdepth: kompl. mm0: 11,5 mmA submersible pump that has been developed to be completely in the cooling fluidTo be submerged.It is mainly used in small machines withLow coolant use (for example, sawing and drilling machines).
Número de artículo: 125299667
Ladies and gentlemen, We want to offer you following machine. Subject to prior sale and Irrrtum Handling device RoboterGETECHA Model GL 5-Y / X / Z / C / A and S-axis Year of construction 1998 DESCRIPTION Y1 axis stroke 800mm Y2 axis stroke 100mm X axis stroke 500mm Z axis stroke 3000mm C axis 0 °-90 ° S axis 1 30mm S axle 2 30mm S 3 axis 30mm A-axis 0 °-90 ° (180 degrees) other techn. Dates on request Photos: handling devices can take bad photos. I just put on a Spritzgiessmaschinbe the ha ...
Número de artículo: 127377786
coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 (230) V0: 1/2 mmdepth: 85, 120, 150, 170,190 usw mmvoltage: 230 VSuction depth: 85 mm
Número de artículo: 125284676
ARBURG designation: Device for spraying in the parting line also adapter for Injection unit called. Warning for 270 machine with 210er injection unit Isolating layer injection devices
Número de artículo: 127378046
coolant capacity: 14 l/minCapacity: 60 Wattconveying height: 4,2 voltage: 400 (230) V0: 3/8 mmSuction depth: 120 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 125284664
ARBURG designation: Device for spraying in the parting line also adapter for Injection unit called. Warning for 270 machine with 210er injection unit Isolating layer injection devices
Número de artículo: 127377640
coolant capacity: 14 l/minCapacity: 60 Wattconveying height: 4,2 voltage: 400 (230) V0: 3/8 mmSuction depth: 85 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.
Número de artículo: 125284660
ARBURG designation: Device for spraying in the parting line also adapter for Injection unit called. Warning for 270 machine with 210er injection unit Isolating layer injection devices
Número de artículo: 127377648
coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 (230) V0: 1/2 mmSuction depth: 200 mm
Número de artículo: 125284654
ARBURG designation: Device for spraying in the parting line also adapter for Injection unit called. Warning for 270 machine with 210er injection unit Isolating layer injection devices Accessories 1 set "Shoehorn" Umlegehilfe for the injection unit
Número de artículo: 127377650
coolant capacity: 110 l/minCapacity: 0,25 Wattconveying height: 10 total power requirement: 0,25 kWvoltage: 400 V0: 3/4 mmSuction depth: 400 mm
Número de artículo: 125284651
ARBURG designation: Device for spraying in the parting line also adapter for Injection unit called. Warning for 270 machine with 210er injection unit Isolating layer injection devices Accessories 1 set "Shoehorn" Umlegehilfe for the injection unit
Número de artículo: 127377652
coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 (230) V0: 1/2 mmSuction depth: 120 mm
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)