318 results

Número de artículo: 127521910
8 up violet CTP system ECRM Mako 8 year 2009 with processor with RIP
Número de artículo: 127378220
max. film width: 530 mmmax. speed: /hvoltage: 100 - 240 Vserial no.: frequency: 50 - 60 Hzweight: 300 kgDimensions (L/W/H): 750 x 1200 x 1100 mm
Número de artículo: 127465041
4 up thermal CTP Kodak Magnus 400 MCU Max size: 762 x 685 mm min size: 300 x 228 mm, Chemical free, S model, 16 000 s/h. RIP Prinergy EVO RTPO performance version EVO 4.0.6.6, Throughput at 2400 dpi, WITH MCU multicasette loader,. Stacker, complete with screen on pc, compressor, enables high-quality imaging with laser head only 7000 plates.
Número de artículo: 127378246
max. film width: 355 mmmax. speed: 0 /hserial no.: 0 voltage: 100-240 Vfrequency: 50-60 Hzweight: 150 kgdimensions of press (L x W x H): Belichter 75 x 85 x 100 cmdimensions of press (L x W x H): RIP 70 x 50 x 70 cmrepeating accuracy: +/- 25 µmRIP includedup to 3000 dpiRed laser diodemax. page width 355 mmmax. 200 lpi screen ruling
Número de artículo: 127464986
4 up thermal CTP AGFA Acento II S (same as 4300 E screen year 2007 16 diodes 20 781 plates produced with SAL with AGFA Azura washing unit with Stacker with RIP AGFA Apogee X
Número de artículo: 127378344
max. film width: 530 mmmax. speed: 58,7 cm/minrepeating accuracy: ± 5 µmformat max.: 525 x 505 mmserial no.: 003311790 weight: 1200 kgdimensions of press (L x W x H): jeweils ca.80 x 120 x 165 cmBacher register system: Control 2000 ambient temperature: 18-30 ° Cimager with developer Imageline (Type RDM 2-23/23/EB,Serial no. 1019636,1998)PC Linotype 2096-HQS (Serial no.963380506,year 1996)Max scanning frequency up to 80 lines / cm
Número de artículo: 127425568
Format (cm): B3 Equipment / Additional information: Overall system: Fully automatic Printing plate material: Mitsubishi Silver Digiplate polyester plates Printing plate thickness: 0.1 - 0.2 mm Material capacity: 61 m / roll in 2 magazines Printing plate format: min. 250 x 250 mm, max. 420 x 550 mm Exposure format: Max. 405 x 546 mm Laser type: Red laser diodes, 670 nm, 10mW Resolution: 900 - 3600 dpi Productivity: 16 plates / hr at 3600 dpi // 20 p / hr at 2540 dpi // 30 p / hr at 900 dpi Rip Hardware: M ...
Número de artículo: 127378352
max. film width: 355 mmmax. speed: 0 /hserial no.: 8518 voltage: 100-240 Vfrequency: 50-60 Hzweight: 150 kgdimensions of press (L x W x H): Belichter 75 x 85 x 100 cmdimensions of press (L x W x H): RIP 70 x 50 x 70 cmrepeating accuracy: +/- 25 µmRIP includedup to 3000 dpiRed laser diodemax. page width 355 mmmax. 200 lpi screen ruling
Número de artículo: 127343226
Age: 2010 – 1 install. 2011 Format (cm): plate size: 1040 x 790 x 0.30 mm DPI: 2400 // NM: 405 // Typ: Violett Dual-Beam PPH (plates / hour): 50 Plate winding cycles: 162.0000 Plate input: Multiloader Cassette: 5 Output and processing: FCF-125V // Clean-out Unit // Stacker PST 480 Equipment / Additional information: Internal punch type: 780 mm for HD Press + plate bending Software: XMF Gateway V6 Hardware: Gateway Server
Número de artículo: 127378374
max. film width: 356 mmmax. speed: 338 qcm/minDimensions (L/W/H): 85x75x100 cmrepeating accuracy: 25 µmmaterial: Materialvorrat 76 m weight: 162 kgmax. exposure length 2000 mmResolution max. 2400 dpired laser diode 670-680 nmpoint sizes 20-35 µm
Número de artículo: 127343220
Counter: 28.502 h Format (cm): Min plate size: 510 x 400 mm Max plate size: 745 x 605 mm DPI: 2400 // Diodes: 16 // NM: 830 Exposure time: 6953 hrs. // PPH (plates / hour): 10 Plate winding cycles: 93.463 Plate input: Singleautoloader SA-L4100 trolley: 1 Platenstapler: Advand PST 26 Equipment / Additional information: Internal punch type: 425 mm for HD Press + platebending
Número de artículo: 127378376
max. film width: 530 mmmax. speed: 1320mm /hvoltage: 100 - 240 Vserial no.: 53310522 frequency: 50 - 60 Hzweight: 300 kgDimensions (L/W/H): 750 x 1200 x 1100 mmmaterial thickness: 0,10 mm
Número de artículo: 127343211
Counter: 36.496 h Format (cm): Min plate size: 324 x 370 mm Max plate size: 830 x 660 mm DPI: 2400 // Diodes: 32 // NM: 830 Exposure time: 6541 hrs. // PPH (plates / hour): 21 Plate winding cycles: 145,943 Plate input: Type Multiloader MA-L4300 Cassette: 3 Equipment / Additional information: Integrated Bacher punch 425 mm Hardware: PIF I / F conversion box Condition: Very good condition / 1 service per year
Número de artículo: 127378382
max. plate size: 680 x 760 cmmax. speed plates: 21 /hAutoloader, Internal plate punch, Stacker
Número de artículo: 127277606
Heidelberg Trendsetter 400 auto loader year: 1999 laser head hours: 3700 RIP+Console Price: on request
Número de artículo: 127289985
-
5.000 €
country-de DE
Size: 960 x 1160 mmEquipments:off-line punchgood condition without any damage
Número de artículo: 127277604
Heidelberg Trendsetter 800 year: 2001 laser head hours: 3550 processor: Agfa Ozasol VA 88 E-P RIP+Console Price: on request
Número de artículo: 125570155
Size: 460 x 550 mmEquipments:max. Resolution: 3600 dpiCTP for polyester platesLight source: red-light laser diode, 670 nm, 10 mWDisk throughput: 17 plates per hour at 2,540 dpimax. Plate size: 460 x 550 mmOn-line sheet development: bath development unit iInline punch: Bacher 2000Construction: inner drummin. Plate size: 250 x 250 mmmaterial handlingexposure technologyautomat. Sheet supply: 1 Magazine standard, optionMachine is purified, and tested
Número de artículo: 127261519
8 - up Themal CTP System CtP Agfa Avalon SF S (4-up - A1) - 2008 year (first owner) Laser type: GLV - 830 nm - Thermal Laser work 16-08-2018 - 10323 hours Min. resolution: 1200 dpi Max. resolution: 2400 dpi Min. plate size: 380 x 310 mm Max. plate size: 980 x 690 mm 28 plate/h - 3 punhing system: Bacher 220, Bacher 425, Komori 550 - Chiller Thermo Scientific (Neslab Merlin M33) On-line developer Glunz & Jensen LDT 85 developer chiller Glunz & Jensen Hc20 Plate Stacker - Advand PST 26-78 Air compres ...
Número de artículo: 125563190
Size: 670 x 760 mmEquipments:Plateprocessor Glunz & JensenRIP
Número de artículo: 127261476
8-up Thermal CTP Kodak Magnus 800 year 2009 Autoloader three plate vehicles to load with Online Processor Modell: Mecury T-HD 1250 with Platestacker Machien produced 642.000 plates in Middel of 2016 new Laserhead. with XPO Interface No RIP. Availabel in 8-10 weeks Located Germany Can be seen in production.
Número de artículo: 127141462
CTP for conventional Offsetplates Basysprint CTP 860x Produced 2013 Type 010505 / 865x 1 magazine Punch to komori 8 up At last check for less than ½ years ago, laser was fine 15-20 plates per hour depending on lighting / coverage Produced 135,543 plates with Online-Processor Heights Aztec developer Model Aztec 850 HD - 2015 Can be seen in production Price: on request
Número de artículo: 127141456
CTP for conventional Offsetplates Basysprint CTP 850 ( New Software upgrade two years ago ) Produced March 2011. 3 magazines - robot Punch for Komori 8up - 4 up and probably also 2 up. At last check for less than half years ago, laser was fine 15-20 plates per hour depending on lighting / coverage Cooler replaced for new model 2 years ago Produced 296,751 plates with online Processor Heights Aztec developer 1 x Model Aztec 850 HD - 2015 produced in the area of 100,000 plates. Price: on req ...
Número de artículo: 126869196
Auto loader SA L4100 / / M.Nr.: 165 / / year of manufacture: 2004 Plate transport: Automatic, Cartridge capacity: 50 sheets Cleaning function: cleaning rollers Power: Single phase 200-240 V Plate Rite 4100 with disk dance system Recording system: External drum Light source: 16-channel infrared laser diodes Panel sizes: 830 x 660 mm / / min: 324 x 370 mm Media: Thermal plates Media thickness: 0.15-0.3 mm Resolution: 2400/2438/2540 dpi Productivity: 10 plates per hour at 2400 dpi Plate stackers: Advanced ...
Número de artículo: 126838785
-
BN 980 €
-
General data Reference number: 3623 Manufacturer: Sigfried Theimer Type: Spektra proof type 2151 . No.: 94020256 Year of construction: 1994 Shipping time: Immediately Facilities: Weight: approx. 50 kg Size: 55B x79T x 95 H cm Power supply: 230 V Power consumption: Unspecified The field: 58 x 43, 5 Pneumatic frame: Yes Program: Yes High pressure mercury vapor lamp: scattering film: Elektrich
Número de artículo: 126838763
-
BN 1.400 €
-
General data Reference no: 3624 Manufacturer: de count GROUP Type: Photopolymer platemaking PA350N2 . No.: 2406 Year of construction:? Shipping time: Immediately Description: Technical features Exposure â?¢ Î?lack acrylic plate with vacuum grooves and a vacuum sheet perfectly hold the negative to the plate â?¢ 6 lamps type TL 44 D 25W â?¢ With internal memory of the lamps life to help determine when it's time to replace them. Washout â?¢ nylon  ...
Número de artículo: 126738529
Heidelberg Suprasetter A 75 14 pph 2540 dpi total plate count 164,000 about 5,900 hours exposure time connection kit OLP debris punch 425 (no MetaShooter)
Número de artículo: 126650618
Número de artículo: 126607474
8 up Thermal CTP AGFA Avalon N8 50 E year 2009 441000 plates produced 14540 laser hours with Singel Auotloader 2 x Trolley with Processor AGFA Elantrix 125 Stacker PIF-Card
Número de artículo: 126476440
-
5.500 
country-fr FR
Kodak Lotem 800 II Quantum year 2000 49750 plates RIP Prinergy Veo 78/103 cm air waster perfo loader 100 plates stacker For more information contact us : snvimachinery@gmail.com SNVI ENERGY GRAPHIC SASU Siège social : 22 rue du camp - 93230 ROMAINVILLE - France Tel : 00331 57 14 99 19 / Mobile : 00336 88 07 09 64
Número de artículo: 126154474
Heidelberg Suprasetter 105 Built in 2006 Single loader produces only about 105,000 plates Including internal cutter Kodak Prinergy software V.P.S. 3.0.7 with PC Incl. Kodak mercury processor Incl. stacker Maximum format: 930 x 1140 mm Min. format: 370 x 323 mm
Número de artículo: 126154469
produces only about 33,200 plates Manual RIP raster Blaster with BlueBox Advant PST 26 forklifts CP85 washing station
Número de artículo: 125994798
Ictp 2000 plate writer, is as new condition, in production with only ca. 500 plates made. We ship worldwide to your local port or to your door!
Número de artículo: 125881753
CTP System Manufcture :Glunz + Jensen Modell: iCTP Platewriter 2400 Plattenformat bis max. 619 x 767 cm. Year :2011 ca. 900 Plates produced new Mainboard, new CR-Assy Motor Juli 2017 Overhauled by Glunz und Jensen in Dänemark in August 2017 März 2018 new ink container withiCTP-RIP Harlequin 7.1 auf Dell Computer incl.TrapPro (Xitron Trapping plug-in) All complet with Dongle, Kartuschen ca. 5 Liter Gummierung 50 Offsetplattenplatten 400 x 511 mm
Número de artículo: 125823199
4- Up Violet CTP System Heidelberg Prosetter 74 year 2005 30 mW Laser Glunz & Jensen with Raptor Plateprocessor with RIP Heidelberg Metadimension Location: germany Price: on request
Número de artículo: 125823147
8 up Violet CTP System Heidelberg Prosetter 102 year: 2001 with Plateprocessor Glunz & Jensen Raptor Pro 85P 49.000 plates produced Location: germany Price: on request
Número de artículo: 125677860
Plate Copy OMM (O.M. Marchetti s.r.l.) PK 45 Year 2000 - Serial-No. 158 -Available Immediately - -can be inspect- -on stock - can be test-
Número de artículo: 125677686
Plate copy Theimer Montakop Nova 3413 Year 1999 - Serial-No. 99060214 with cabinet automatic scattering foil -Available Immediately - -can be inspect- -on stock - can be test-; good
Número de artículo: 125677702
Plate copy POLYGRAPH 7203.2 Year 1994 - Serial-No. 04507 Exposing Size max. 600 x 750mm with cabinet automatic scattering foil -Available Immediately - -can be inspect- -on stock - can be test-; good
Número de artículo: 125677708
CTF Imagesetter AGFA AccuSet 800 Plus Year ca. 1992 -Available Immediately - -can be inspect- -on stock-; good
Número de artículo: 125677746
Plate copy Theimer Montakop 95 Typ 3635 Serial-No. 87110360 Size max. 950 x 1150mm -Available Immediately - -can be inspect- -on stock - can be test-
Número de artículo: 125673455
Thermal CTP 32 laser diodes Maximum plate format: 1130 x 950 mm Capacity: ca. 8 plates / St Manual Plattenbe / discharge Incl. 1-bit TIFF connection + Windows-computer complete with plate developer Glunz & Jensen 85 HDX
Número de artículo: 125667865
Plate Copy Theimer 2180 Year 1991 - Serial-No. 9111/0127 -Available Immediately - -can be inspect- -on stock - can be test-; good
Número de artículo: 125655633
Manufacturer / Origin: Duplomat Germany (EU) Format (cm): 56 x 42
Número de artículo: 125528424
Thermal Plateprocessor AGFA Elantrix 125 HX Quarz III 125 year: 2012 Price on request
Número de artículo: 125465520
-
18.000 €
-
Basysprint UV setter semi-automatic CTP system and separate water chiller - digital screen imaging with UV - exposure - wavelength approx. 360-450 nm - format 690-940 mm - Materialthickness 0.15-2.0 mm - dimension UV setter W D 2,300 x 2,000 x H 1,710 mm - weight UV setter OSTEO. 2,000 kg - operating hours approx. 43.000 h - lamp operating hours approx. 650 h (of max. 2000 h)
Número de artículo: 125456377
Palladio plate setter with processor built in 2003 With LP 82 Lithostar ultra very well preserved and little used more info follows. The machine is located in Iran visit is possible any time
Número de artículo: 125236844
AGFA Avantra 25s image setter + OLP + computer with Apogee PDF series 3 with keyboard, mouse and monitor
Número de artículo: 125085664
8 – up Violet CTP FUJI Luxel V- HS (high speed) up to 50 plates per hour year 2010/installed in 2011 Violet Dual Beam Laser With Multiloader with 5 casettes Punch 780 for HD Presses + Platebending 162.000 plates produced with FCF 125 C cleanout unit and PST Stacker FUJI XMF Gateway V6 Gateway Server Available beginning of June 2018 Still under full service contract Price: 16.000 EURO
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)