Grinder for copper separation Dry model SM200 Ecorobust
CONTROLS CNC Teach In Controls NUM 1062 BASIC FUNCTIONS number of x/z slides: 1 live positions: no WORKING RANGE TURNING swing diameter (max): 570 mm turning diameter (max): 365 mm worpiece length max.: 1000 mmMAIN SPINDLE spindle revolutions (min): 3 /min spindle revolutions (max): 2500 /min number of gears: 2 spindle diameter: 62 mmX/Z SLIDE traverse velocity Z (min): 0 mm/min traverse velocity Z (max): 10000 mm/min traverse velocity X (min): 0 mm/min traverse velocity X (max): 5000 mm/min tool fixture: Steel Holder TAILSTOCK taper: MK 5 ELECTRICAL SPECIFICATIONS mains power supply: 35 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space require ...
Center width: 1500mm, max. chuck diameter: 200/240mm, motor power: 4kW, including steady rest, on-site inspection is possible.
Max. duct cross-section: 160x160mm, max. straightening/ crosscut: 0,8-1,5x1500mm, controls: SPS-FS, without decoiler.
Controls: AGIE PULS 30L, connected load: 11kVA, an inspection on site is possible.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC Teach In Controls SIEMENS BASIC FUNCTIONS design principle: flatbed number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 720 mm turning diameter (max): 380 mm bar diameter (max): 108 mm worpiece length max.: 1500 mmMAIN SPINDLE spindle revolutions (min): 0 /min spindle revolutions (max): 1200 /min number of gears: 3 spindle bore diameter: 108 mmX/Z SLIDE traverse velocity Z (max): 5000 mm/min traverse velocity X (max): 5000 mm/min rapid traverse Z: 5000 mm/min rapid traverse X: 5000 mm/min tool fixture: Steel Holder TAILSTOCK distance betw. centers (max): 1500 mm sleeve stroke: 200 mm sleeve diameter: 120 mm taper: MK 6 ELECTRICAL SPECIFICATI ...
Speed range: 45-2800 rpm, speed grading: 1.25. Turret slide: Diameter of turret head: 160mm, number/diameter of tool mounting holes: 6 or 8 /25.4mm. Working path of the turret slide: 90mm, adjustment of the working path: 35mm, distance turret head to spindle head: 90mm-285mm. Dimensions X/Y/Z: 2250/970/1600, weight: 2500kg. On-site viewing is possible.
There are two identical bending machines available, working width: 2000mm.
System includes (1) 2x Ambrell Easyheat induction heaters (2) conveyor belt (3) Kelvin cooling system, weight: 235 kg.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC Teach In Controls SIEMENS 810 D BASIC FUNCTIONS number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 420 mm worpiece length max.: 1130 mmMAIN SPINDLE spindle revolutions (min): 10 /min spindle revolutions (max): 3000 /min spindle bore diameter: 51 mmTAILSTOCK sleeve stroke: 110 mm sleeve diameter: 70 mm taper: MK 4 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3500 mm space requirements -front/back-: 1500 mm total height: 1800 mm total weight approx.: 3500 kgMachine rarely usedFurnishing:- 3 jaw chuck D210- 4 compartments ready change holder
Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024.
System includes (1) CNC Transfer Machine Gnutti DF-12, connected load: 120kW, weight: 22t (2) Rotary Transfer System Mako RL10 (3) Washing Machine Mako WM3 MZ3, washing pressure: 80bar (4) Chip Shredder ZVD 600-J with VRF 900/6600 filter system, screw pump KTS, VRF vacuum rotary filter, chip conveyor (5) 5x Industrial Robots ABB, system length: 10,858mm, system width: 9798mm, with documentation, on-site inspection is possible.
CONTROLS NC controls UNIPORT 3 WORKING RANGE SURFACE GRINDING grinding length: 2200 mm grinding width: 350 mm workpiece height (max) with largest wheel: 300 mm number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING) table surface (left-right): 2200 mm table surface (front-back): 350 mm magnetic table: yes MAGNETIC TABLE length: 2150 mm width: 345 mmSPINDLESTOCK GRINDING SPINDLE spindle revolutions (max): 4000 /min drive power: 30 kWGRINDING TOOL type of grinding tool: wheel including accessories such as- various grinding wheels- disk dressing device
It is still functional, but nothing has been produced with it for a long time. Inner radii and outer radii from 6 to 289 mm. Production examples in the pictures.
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
Loading area: 1300x1300mm, loading height: 1000mm, connected load: 9.2kW, length: 2670mm, width: 1840mm, height: 2375mm, weight: 1.2t, with documentation and accessories, an on-site inspection is possible.