advanced search
4378 results
used
90s cold feed extruder, GE 90 x 16 D Vac, make Troester, with large hose / profile spray head, drive 52 KW Siemens AC, 4 TCU Siengle
used
125 mm x 22 D vacuum cold feed extruder, make Rubicon, 165 KW Siemens drive AC, screw speed 3 to 60 rpm, G 120/125 straight-ahead profile spray head, colour vacuum pump. Busch, 6pcs TCU Type WTD 6, Touch Screen Control Panel,
used
125 mm cold-feed siftext rudder with strainer or strand injection head for calender loading
used
120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024
New in: 2012
used
Inv. Num. : 7961 Type: KM110-380 Producer: Krauss Maffei Created: 2012 Parameters: Clamping force: 80 t Screw diameter: 35 mm Distance between uprights (horizontal): 470 mm Machine length: 4240 mm Machine width: 1510 mm Machine height: 2180 mm Injection weight: 3900 kg Equipment: Control MC5
New in: 1997
used
Inv. Num. : 7940 Type: KM 150-700/C1 Producer: Krauss Maffei Created: 1997 Parameters: Clamping force: 150 t Screw diameter: 50 mm Injection capacity: 377 cm³ Injection mass: 343 g Clamping plate height: 780 mm Clamping plate width: 790 mm Distance between uprights (horizontal): 500 mm Distance between uprights (vertical): 500 mm Maximum spray pressure: 1892 bar Opening of the mold: 600 mm Machine length: 4670 mm Machine width: 1480 mm Machine height: 2160 mm Injection weight: 7100 kg
New in: 2007
used
Inv. Num. : 7915 Type: Victory 750/150 Producer: ENGEL Created: 2007 Parameters: Control system: Keba Hours: 71578 h Accessories: 8x hot runner 2x core pulling device on movable plate Hydraulic center ejector
New in: 2007
used
Inv. Num. : 7752 Type: BEX 1-75-30B Producer: Battenfeld Created: 2007 Parameters: Screw diameter: 75 mm Output capacity: 400 kg/h Weight: 3400 kg Equipment: Tow Strap
New in: 2006
used
Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg
New in: 2001
used
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
New in: 2018
used
Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm
used
Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap
used
Inv. Num. : 7019 Type: KM 125-520C1 Producer: Krauss Maffei Created: 2004 Parameters: Duty cycle: 4818 h Clamping force: 125 t Plate dimensions: 745x770 mm Injection weight: 6000 kg
New in: 1998
used
Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t
New in: 2011
used
VIRO StyroDesign XL-2 styrofoam cutting machine was manufactured in 2011 in Slovenia by VIRO pakirni stroji d. o. o. This highly efficient machine is used for precision cutting of materials such as polystyrene EPS blocks. The machining process is performed by means of high-temperature, 2000 mm long resistance wires, which ensure fast and efficient machining. The installed SytroDesignPRO software supports the design and optimisation of cutting layouts, enabling easy management of the process and reduction of material losses. Thanks to its versatility and precision, the StyroDesign XL-2 EPS cutting machine is an excellent choice for the production of, among others, insulation components and other prefabricated building components. Technical specifications of the VIRO StyroDesign XL-2 foam cutting machine - software: StyroDesign PRO - cutting angle: 90° - possibility of cutting at an ...
New in: 2015
used
SAIP SE 15 polyurethane foam dispensing machine was manufactured in 2015 in Italy by SAIP Equipment. The machine has been designed and developed for the dispensing of all kinds of polyurethane foams in environmentally friendly conditions. With a high capacity (up to 15 kg/min) and the ability to adjust the mixing ratio of the components from 1:1 to 5:1, the machine can easily meet any production requirement. The SAIP polyurethane foam mixing machine is also extremely easy to operate. Programming of the work parameters and their control are possible via a reliable touchscreen control system. The PUR foam spray unit consists of the following components: - control panel - low-pressure mixing head - mixing head support beam - isocyanate and polyol storage and conditioning unit - isocyanate and polyol metering unit - mixing head solvent washing system Technical data of the SAIP SE ...
New in: 2004
used
PRESMA ROTO HP 2 BIC rotary injection moulding machine was built in 2004 in Italy by PRESMA S.p.A. The machine, designed for the mass production of plastic parts, is distinguished by the use of a special rotary system that allows the use of multiple moulds of different shapes and weights at the same time. The moulds are filled one by one with plasticised plastic and then clamped with a press force of 30 tonnes. If a certain production volume is reached, it is possible to skip one or more workstations. The workpieces produced in this way are in turn distinguished by their high repeatability, durability and precision. The ROTO HP 2 BIC rotary injection moulding machine weighs 17800 kg. Technical specifications of the PRESMA ROTO HP 2 BIC injection moulding machine - maximum clamping force: 30 t (300 kN) - EE1 screw diameter: 62 mm - EE2 screw diameter: 62 mm - screw length/diameter ...
New in: 2004
used
BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...
New in: 2001
used
PRESMA ROTO G rotary injection moulding machine was built in 2001 in Italy by PRESMA S.p.A. The machine is distinguished by the use of a special rotary system that allows multiple moulds of different shapes and weights to be used simultaneously. The moulds are filled one by one with plasticised plastic and then clamped with a press force of 7 tonnes. If a certain production volume is reached, it is possible to skip one or more workstations. This system, combined with a number of reliable components with excellent parameters, makes the PRESMA rotary injection moulding machine the ideal choice for economical mass production of plastic parts. The total weight of the machine is 6100 kg. Technical specifications of the PRESMA ROTO G injection moulding machine - maximum clamping force: 7 t (70 kN) - EE1 screw diameter: 62 mm - screw length/diameter ratio: 18 L/D - maximum injection pres ...
New in: 2021
used
JDM 700-S wicket bag making machine was built in 2021 in China by JU DING MACHINERY (SHANGHAI) CO., LTD. The machine, designed for the automatic production of film bags with side and bottom sealing, is distinguished by the use of world-brand components. These include two unwinders controlled by PANASONIC inverters, which precisely feed the film into the working area. The film is then accurately measured, cut and sealed accordingly, and holes are made in the finished bags. Once the production process is complete, the bags are transferred to a receiving table, where they are stacked on top of each other to form small packages. The JDM 700S film bag making machine thus offers high quality products with minimum effort. The total weight of the machine is 6500 kg. The JDM 700 S plastic bag and sack production line is fully complete and consists of the following components: – PLC controll ...