Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
Palladin pellet mill in stainless steel, type: PAL 350 E, main drive 37 Kw., ring matrix diameter 350 mm, built in 1988, with feed and discharge screw both in stainless steel Last run in chocolate factory for granulation of chocolate.
Master Magnets Permanent Magnet Strap Length frame A.A.= 2200 mm , belt width : 700 mm. Block : L= 1450 x W=600 x H=200 mm. Power Requirement : Hydromotor
- Engine power 11kW - Control PLC supported, with two-hand safety circuit - Cutting force 2x20to - Cutting speed approx.33 mm/sec - Cutting channel for rolls to be processed by max. roll length approx. 2500mm max. roll diameter approx. 1400mm - Machine weight approx. 4.5to - Tank capacity approx.160litres - Ambient temperature +5°C - Heat dissipation up to 2 kW - Hand guard grille in the area of the control panel and opposite Machine in stock and immediately available More information and price on request
For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request
Motor power 11kW with double pump Control SPS, supported two-hand operation -with a key-operated switch for control voltage / from Cutting force 2 x 20to Feeding channel working width max width 2500 mm loading channel working height = height = 1535 > mm extended knife steel under-sink reinforced, straight version incl. two openings for forklift loading -Colours: Corpus RAL acc. to customers request Cutter bar & grille Ral1028 / melon yellow delivery time: approx. 12-14 weeks Price and photos upon request
The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks
Bag opener to open the bag like "Gelber sack", etc. As a stand-alone device usable or as components in E.g. a sorting facility. Capacity: 20-30 cbm Power: ~ 22kW Dimensions: 8000x2350x2700mm Weight: 11t Exhibition machine, condition as new. more data and estimate on request.
For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Power 5, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 25 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roll diameter 800 mm - weight of the machine approx. 2500 kg - noise level < 80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand Guard - color machine/Cabinet - RAL 7035 (light grey) guard - RAL 1028 (melon yellow) machine immediately available Price and further details on request
- Engine power 7.5kW / 32 amperes - Control PLC supported, with two-hand safety circuit - Cutting force 30to Cutting channel designed for: - max. roll length 1500mm - max. roll diameter 1200mm - Machine weight approx. 3000kg - Hand guard grille in the area of the control panel and opposite - Forklift riding shoes are used for easy and safe transport of the Machine by forklift - Spaltertisch straight version Colour blue Machine immediately available
-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 850 mm -Machine weight approx. 3, 4to -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request
Container filling system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 ° Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 mm / distance 4700 mm / drive 1, 1kW Colour RAL 9006 / White aluminium System now available Price and further details on request
-Engine power 7, 5kW -30to cutting force Cutting channel designed for -maximum roll length 1500 mm -maximum roll diameter 1200 mm -Machine weight approx. 3000 kg -Tank capacity ca. 100Liter -Hand guards in the area of the control panel and to present -Splitting er table straight version Documentation 2 German (1 x writing, 1 x CD) Being body RAL 7035 light grey Guards/blade RAL 1028 melon yellow Ibkah3p Machine in production / available from 04-2019 Price and further details on request
-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 1250 mm -Machine weight approx. 3, 9t -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request
Vibrorinne MATEC drive rear Overtime separation and â?? repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...
Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!
Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland
Builder: WILLIBALD Model: SHARK Engine: MAN 353 kW (480 HP) Data: L. 11.000 mm x W. 2.500 mm x H. 3.950 mm Year: 2012 Working Hours: 9.150 h Hourly Production: 220 m³/h Shredding System: 48 HAMMER Rotor Data: L. 1.450 mm x D. 1.100 mm N° RPM Rotor: 1.300 RPM Fuel Tank: 450 L Weight: 18.000 kg