Working width: 4000mm, with 3 warp beams, 6 sectional warp beams, 20 shafts 13 inch, dobby machine 2881/2 and batch winder Neuenhauser, operational hours counter: 10,613h.
Rotational speed: 900/min, connected load: 2.7kVA, weight: 3.98t, with documentation.
Working width: 2600mm, with functional software, controls and documentation, without spare parts.
Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007.
Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.
Needle system: 134-35 LR, needle size: 110-150Nm, max. sewing speed: 2800/min, max. stitch length: 8mm, stitch type: 301 (Lockstitch), max. clearance under the sewing foot: 14mm, clear workspace: 270x115mm.
Roll width: 2600mm, controls: SIEMENS SIMATIC HMI, machine was overhauled in 2015.
Seam width: 28mm, with integrated cutting device, knife diameter: 100mm.
There are fifteen identical machines available, number of winding positions: 196, length: 23,900mm, width: 1100mm, height: 2100mm, two machines are equipped with an inverter.
There are three identical machines available, number of winding positions: 180m, length: 23,900mm, width: 1100mm, height: 2100mm.
Output: 720 pair/h, number of forms: 10, connected load: 13kW, length: 1934mm, width: 1737mm, height: 1910mm, operational hours counter: ca. 100h, including documentation and 20 forms.
There are 22 machines available, 4x Singer 770 D41PE, 2x Singer 990 E3, 1x Singer 993 E3 FA320, 1x Singer 460 K73, 1x Union Spezial Klasse 75300 A, 1x Rimoldi 446930, 1x Romoldi 416498, 1x Rimoldi S60, 1x Rimoldi 7142, 1x Rimoldi 7143, 1x Lewis 150-2, 2x Kettma Klasse 100KA, 1x Kettma Klasse 100 KAS and four additional machines.
Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air.
Capacity: 19l, operating temperature: 0-140°C, working overpressure: 6bar, controls: SEDOMAT 5500, with documentation, the machine was hardly used.
A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: 5000mm. (3) Main Drive Roller Menschner, cast roller Monforts, year of construction: 1987 (4) Tower Shearing Machine Menschner NTS-T-III, year of construction: 1988, fabric width: 300x5500mm, with three shearing cylinders (5) Control panel for auxiliary drives, deflection, transition bridge, roller fabric storage ETF, year of construction: 1988, storage capacity: approx. 80 running meters, with two center controls Erhardt+Leimer.
Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used ...
Fixing width: 250mm, heating output: 8kW, temperature: 0-250°C, speed: 0-12m/min, with documentation.