prensas para madeira usadas para venda

Koller sleeves punched for CPM 22-2.5  ... mais informação

Koller sleeves Geriffelt for CPM 22-2.5  ... mais informação

Machine for the postforming of laminate on rounded boardsUsefull length: 4200 mmPanel width: 200 - 1300 mmLaminate heating by infrared beamBending process by jig that is pneumatically loaded ... mais informação

Description: 30001200 mm cold press for panelsApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... mais informação

The working width of the shafts is 1400 mm The shafts are heated with grease - Device COREMA TM/OH - 2036 S UL You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.2.3  ... mais informação

For sale hot hydraulic press for gluing furniture board. In working condition. Maximum board size 25001300mm ... mais informação

Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm  ... mais informação

2200 x 1250 mm, heating plates silver  ... mais informação

Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)  ... mais informação

You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.2.1.  ... mais informação

SPECIFICATIONS: Dimensions of the plate mm: 2300 x 1000 Number of pistons: 04 Piston diameter mm: 60 Water operation with boiler  ... mais informação

Technische Daten: - Arbeitsdruck 10 t- inklusive viele unterschiedliche Einsätze 1/2\", 3/4\", 1\", 1 1/4\", 1 1/2\", 2\"- für Wasser-, Gas od. andere Formrohre verschiedenster Materialien- selbstreinigender und wartungsarmer Zylinder- automatischer Kolbenrückzug- stabiler Stand durch drei Füße- aufklappbarer Rahmen zum einfachen und schnellen Einlegen des Rohlings- max. Kolbenhub: 155 mm- Abmessungen L=710 , B=590, H=220 mm- Bruttogewicht 48 kg- Nettogewicht 45 kg

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

A fines press for dewatering for the wood industry is available. Screw diameter: 260mm, dewatering basket length: 520mm/100mm, speed: 29rpm, weight: approx. 830kg. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging. ... mais informação

An Impressafiner is available for dewatering in the timber industry. Operating pressure: 8bar, weight: approx. 15500kg. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging. ... mais informação

- automatische Beschickung über Transportband- max. Presslänge 3100 mm- max. Werkstückbreite 100 mm- max. Werkstückhöhe 80 mm- max. Arbeitsdruck 7500 kg- Motor Hydraulikpumpe 4,0 kW- Motor Vorschub 0,75 + 1,1 kW- Motor Ablängsäge 2,2 kW- Spannung 50 Hz, 400 V- Gesamtleistung 9,15 kW- Drehzahl Säge 2800 U/min- Sägeblatt FI 350 mm, Bohrung 30 mm- Vorschubgeschwindigkeit 30 - 60 m/min- Druckluftbedarf 8 bar- Abmessungen L=4600,B=1400, H=1800 mm- Gewicht 2200 kg

- automatische Beschickung über Transportband- max. Presslänge 4500 mm- max. Werkstückbreite 150 mm- max. Werkstückhöhe 80 mm- max. Arbeitsdruck 7500 kg- Motor Hydraulikpumpe 4,0 kW- Motor Vorschub 0,75 + 1,1 kW- Motor Ablängsäge 2,2 kW- Spannung 50 Hz, 400 V- Gesamtleistung 8,05 kW- Drehzahl Säge 2800 U/min- Sägeblatt FI 350 mm, Bohrung 30 mm- Vorschubgeschwindigkeit 30 - 60 m/min- Druckluftbedarf 8 bar- Abmessungen L=6000,B=1400, H=1800 mm- Gewicht 2500 kg

- automatische Beschickung über Transportband- max. Presslänge 6000 mm- max. Werkstückbreite 150 mm- max. Werkstückhöhe 80 mm- max. Arbeitsdruck 7500 kg- Motor Hydraulikpumpe 4,0 kW - Motor Vorschub 0,75 + 1,1 kW- Motor Ablängsäge 2,2 kW- Spannung 50 Hz, 400 V- Gesamtleistung 8,05 kW- Drehzahl Säge 2800 U/min- Sägeblatt FI 350 mm, Bohrung 30 mm- Vorschubgeschwindigkeit 30 - 60 m/min- Druckluftbedarf 8 bar- Abmessungen L=7600,B=1400, H=1800 mm- Gewicht 2950 kg

Technische Daten: - Durchsatz 500 - 1200 kg / h (abhängig von den Sieblöchern und der Produktfeuchtigkeit)- Zerkleinerungsfraktion 8 - 15 mm und mehr (Größe ist abhängig von den Sieböffnungen)- Feuchtigkeit des geschredderten Produkts ... mais informação

- Pressing area 2 x 1240 x 1250 mm - total pressure 2 x 25 to - max. opening width 1000 mm - total connection 4.0 kW - dimensions L=3000, W=1250,H=3050 mm - weight 2850 kg ... mais informação