Fabricante:
(Categoría: 209)
Chopper Fabr. Ackermann Type HB 900/220 YOC 1991 with slider ... más información
Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991
Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991
Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991 ... más información
Manufacturer: IMA, Type: AVM/K/I/G 80/822/SR/ L 20, Year: 1991, Min-max edge material mm: 3-15, Work piece width min-max mm: 80, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 50, Min-max feed m/min: 18, Finished product: Leistenmaschine, Premilling: yes, Fine milling: yes, Coil magazine: yes, Min.-max. batten magazine mm: 3-15, Mitre stations: yes, Pre-milling: yes, Top pressure belt/roller: Rolle, Kantenschleifen gerade: yes, Kantenschleifenradius: 2, Werkstückunterstützung: yes, Compressed air bar: 6, Machine lenght mm: 11000, Year :1991
Slow runner with sliding floor 800 mm wide rotor 22 kw engine ... más información
CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16,069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)
Slow runner with sliding floor 800 mm rotor width 11 kw motor ... más información
Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector ... más información
Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm<CRLF>Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer mill ...
Umbalzautomat, Umalzfrasmaschine -Max. Passage height: 120 mm -Spindle diameter: 40 mm Year of construction: 1992 -Weight: approx. 1950 kg -Dimensions: 3500/1900/H1800 mm ... más información
1992 Masterwood MW21.31KS CNC drilling-milling machine Electric throttle (throttle n° ) Electric throttle - 11 fuggoleges + 6 horizontal - 11 ftie:e:oleges + 6 horizontal + furrow - 24.000 rpm 2.04. Noise level The noise level of the cheetah: MW 12.25 KS/ MW 15.38 KS/ MW 18.38 KS/ MW 21.31 KS/ MW 21.42 KS In accordance with 1SO7690 - EN848.3 Furas: - level of acoustic noise Leą at the operator´s load - the maximum power of the instantaneous acoustic footprint is less than - the acoustic difference under the LWA load is below Ćitvalastas: 19,5 dB (A) 130 dB (C) 99,2 dB (A) - level of acoustic noise Leą at the operator´s load: 82,5 dB (A) - the maximum power of the instantaneous acoustical noise is less than 130 dB (C) - the acoustic difference under LWA load is less than 103,4 dB (A) The tests were carried out with a Bruel & Kjaer 223 I precision integral sound ...
max workpiece width: 2500 mmmax thickness: 150 mmFeed by chain trackTop pressure by beltsEquipment:1+1 Saw motor 7,5 kW ... más información
Manufacturer: Moldow, Type: SA, Control: yes, Year: 1992, Volume flow rate m³/h: ca. 75.000, Filter surface in m²: 690, Qty. filter hoses: 400, Hose diameter in mm!: 220, Length of filter tubes: 2500, Number of filter filter gallerys: 11, Number of fans: 4, 2nd Exhaust fan kW: 22, 3rd Exhaust fan kW: 37, 4th Exhaust fan kW: 15, 5th extractor fan kW: 22, Year :1992
Manufacturer: Venti Oelde, Type: EC 35-2-AS, Year: 1992, Filter system - positive pressure: yes, Volume flow rate m³/h: 7500, Filter surface in m²: 70, Filter hoses: Polyestergewebe, Qty. filter hoses: 40, Electronic control board: 1, Suction pipe diameter 1 mm: 15, FREE TEXT: inkl. Schaltschrank, Year :1992
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: approx. 3 kW -Connection input: Ø 230 mm -Connection output: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg ... más información
Workpiece thickness: max. 45mm, workpiece length: min. 180mm, workpiece width: min. 60mm, pressure force of a roller: approx. 400N, feed speed: 16m/min max. With documentation, an on-site inspection is possible. ... más información
Manufacturer: BA, Type: 143, Year: 1992, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Edgeband thickness max mm: 3, Panel length min mm: 250, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 0,5, Trimming saw: yes, Flush/radius/chamfer milling: yes, Machine lenght mm: 1000, Maschine vorführbereit: yes, Year :1992
Single-shaft chipper with rotor width of 150 cm with 37 kw motor with hydraulic slider ... más información
x4 1992 HOMAG FL 68/10/2 OSB tongue and groove production line This production line will be replaced by a new production line, therefore the machine unit will be available for sale. The production line continuously produces and processes 270 - 300 m3 OSB boards. OSB N +F production line: production line for edge processing and edge milling of OSB, MDF, chipboard, panels and other wooden boards. The line consists of 4 milling machine units and the corresponding service units: Milling machine type: HOMAG FL 68/10/2 (year of production 1992). The right side of both milling machine units is fixed, and the left side can be adjusted according to the width and length of the workpiece. The workpiece is transported through the machine by a special chain with infinitely variable speed control. The workpiece is stabilised from above by a special adhesive tape and the height can be adjusted ...