subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 204)
Description: Dimensions: 7.3 x 2.3 x 2.4m Operating hours: approx. 9,000h 7+1 edge support 3+3 bevel supports 1 calibrator top diamond 2 surface calibrators (grinding) top 1 water nose at the bottom 1 water nose top for set-off 15 pre-programmed profiles (round bar, quarter bar...) ATTENTION: ex foundation - buyer must take care of dismantling and loading/transport himself Location: A-4950 SchwaigApprox. Onsite Dimension. (l x w x h): 7,300 x 2,300 x 2,400 mm, weight approx.: 12,000 kg
total power requirement:0,55 kwOverall size:800 x 900 x 1600 mmWeight:220 kgaccessories::mit Absaugung 0,2 kw ... más información
Code: 0772 Brand: DE STEFANI Model: MVT 1000 Edge sander with 1 group for flat and shaped edges, solid wood edges, Mdf, veneered, melamine paper covered, varnished, for furniture, doors, panels, etc. Technical data: Tilting sanding group suitable to sand rough or finished mouldings with pad for flat and shaped surfaces 2 speed motor rpm 660/1450 Max working height mm 100 - Adjustment by handwheel Feed track speed variator from 6 to 20 mt/min Extractable roller conveyor for panel support Abrasive belt cleaning blower N° 1 suction mouth diameter mm 120 N° 1 suction mouth diameter mm 100 Compressed air 6-7 atm Overall dimensions mm 2100 x 1300 x 1400 h Weight kg 1100
Description: Horizontal sanding machine with electric table positioner Roller rotation speed from 1400 to 2800 rpm in selectable direction from selector switchApprox. Onsite Dimension. (l x w x h): 4,500 x 1,700 x 1,700 mm, weight approx.: 400 kg ... más información
Description: Bottom belt feed Pad on pneumatic belt Adjustable sandingApprox. Onsite Dimension. (l x w x h): 1,900 x 800 x 900 mm, weight approx.: 200 kg ... más información
Description: Horizontal sander for professional carpentry F.lli Bini Restored and reconditioned Electric worktable positionerApprox. Onsite Dimension. (l x w x h): 4,500 x 1,600 x 1,800 mm, weight approx.: 300 kg ... más información
Description: Feedrate with two speeds Roller with pad Hard rubber roller Electric platen positioner 10 HP motorApprox. Onsite Dimension. (l x w x h): 2,198 x 1,340 x 1,930 mm, weight approx.: 1,000 kg ... más información
Description: 3.50 metre sander with electric raising and lowering and reinforced carriage for panel handlingApprox. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 1,700 mm, weight approx.: 450 kg ... más información
- Combi grinding unit with calibration roller and sanding pad - Working width 950 mm - Sanding belt width max. 970 mm - Sanding belt length 1,700 mm - Workpiece thickness max. 150 mm - Feed speed 4 and 8 m/min - Motor power 7.5 kW - Feed motor 0.45/0.6 kW - Height adjustment 0.2 kW - Suction nozzle Ø 160 mm - Compressed air connection 6 bar - Air requirement approx. 10NL/min - Electrical connection: 380 V, 50 Hz, 20 A - Dimensions: approx. 1,775 x 1,570 x 1,830 mm - Weight approx. 1,000 kg Technical data subject to actual equipment
Automatic calibration and fine grinding, wide belt grinder with Super Finish unit, brushing unit and practically full equipment A video of the machine running can be sent on request. Two-belt machine with combination unit, super-finish unit with internal lamellar belt and interchangeable brush unit Ideal automatic sanding machine for interior finishing companies with a wide range of applications from calibration, fine sanding, paint sanding to structuring. 1. Aggregate: C-unit 15kW as a combination unit with grooved steel roller and articulated sanding pad with 25mm segment width Contact roller can be pneumatically adjusted, low wear due to steel roller Pneumatic workpiece-controlled belt blow-out device adjustable in 5 steps for controlled compressed air demand Belt speed frequency controlled from 2 - 18 m/s 2. Aggregate: H-unit 15kW as unit with internal lamellar ...
Used Oscillating Roll Grinding Machine Manufacturer: Zimmermann Type FZ OZS Table size 500 x 500 mm Height adjustment 70 mm Swivel range 20/30° Weight approx. 160 kg with large batches of various rollers Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also appli ...
grinding length: 600 mmgrinding width: 375 mmworkpiece height: 375 mmmagnetic table diameter: 600 x 350 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Description: Motor 0.6 kW, max. sanding width 150 mm, with disc sanding unit, disc diameter approx. 230 mmApprox. Onsite Dimension. (l x w x h): 800 x 600 x 1,200 mm, weight approx.: 60 kg ... más información
Description: Brush diameter approx. 260 mm, table 1020 x 620 mm, working height approx. 870 mmApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,400 mm, weight approx.: 120 kg ... más información
Description: Mod. 70 Equipped with 3 rollers. Working length: 1150 mm. Workpiece passage section: 170 mm Also equipped with: Perforated belt Depressor Scotch brite roller Outfeed rotary blowers Approx. Onsite Dimension. (l x w x h): 1,600 x 2,900 x 2,400 mm, weight approx.: 2,500 kg ... más información
Description: Machine number 3836131402200, clamping table length approx. 3600 mm, 2 motors for horizontal machining, 7 motors for vertical machining, 3 motors each for top and bottom machining phaseApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... más información
Description: Machine number 3835931402100, clamping table length approx. 3600 mm, 2 motors horizontal machining, 6 motors vertical machining, 3 motors each for top and bottom phase machiningApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... más información
Used Profile Grinding Machine Manufacturer: Zimmermann Type FZ PS 1/2 Power 1.6 kW Total weight approx. 400 kg With abb. Sharpening rods Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift/crane for loading is available. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Compan ...
Used disc sander Manufacturer: Zimmermann Type FZ SZ 3 Built in 1980 Diameter 900 mm Power 4 kW Speed 720 rpm. Weight approx. 600 kg Table swivel 20° up, 30° down Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part ...
Description: Working width 1350 mm Composed by: 1 transversal sanding unit 2 roller/pad groupsApprox. Onsite Dimension. (l x w x h): 3,700 x 3,000 x 2,630 mm, weight approx.: 5,220 kg ... más información