subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información
Max. working diameter: 630mm Distance between tines: 3500mm 5 lunettes fixed and movable. ... más información
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
Razan 1M65 Screw-cutting lathe 1M65 (RMC 2800 mm), after overhaul 1999 ... más información
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... más información
The machine is in good technical condition. Circulating diameter above the bed: 550mm Distance between points: 3000mm Accessories: chucks, lunettes Weight: 3220kg Possibility of inspection in operation by prior arrangement. Year of manufacture/SO/GO: 1979/-/1993 ... más información
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
turning diameter:220 mmturning length:200 mmcontrol:Fanuc 0i TD mit Manual guide, 10,4" LCD spindle speeds:4800 1/min.spindle nose:A2- 6bar material dia.:44 mmC-axis:0,001 °x-travel:155 mmz-travel:220 mmrapid power traverse in X-and Z direction:20 m/minspindle drive:11/15 KW ( FANUC ßiL12/10000 )coolant:8 barWeight approx.:2,4 tMachine size (LxWxH):1560x1450x1760 mm3-jaw hydraulic chuck:200 mmturret:12-fach, VDI 40 hydraulic unit:mit Lufkühler soft jaw:1 Satz CNC controller:Fanuc 0i TD mit Manual guide, 10,4" LCD Boring bar holder:2 St. 90°-Halter; 2 Stk. Fräshalter, VDI-40 Tool setter:manuell Automatic Pallet :14 Stk. Paletten mit Sicherheitseinrichtung soft jaw:1 Satz+SPECIAL PRICE+SPECIAL OFFER+main features:-high speed-high spindle torque-big spindle bore-automatic forced lubrication-hardened and ground guideways-brand-new design eterior-CE certificate of TÜV Rheinland, Germany ...
Year of Manufacture/SO/GO: -/-/1981 The machine is in good technical condition. Max. circulating diameter: 630mm Distance between spikes: 3000mm Accessories: chuck and bezel By prior arrangement, the possibility of a tour in progress. ... más información
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
turning diameter:220 mmturning length:200 mmcontrol:Fanuc 0i-TF Manual Guide bar material dia.:26 mmspindle speeds:6000 1/min.spindle drive:7,5/11 kWrapid speed:20 m/mintravel -x axis:155 mmtravel - z:200 mmCNC controller:Fanuc 0i-TF Manual Guide (Werkstattprogrammierung) + 10,4" LCD turret:12 (hydr.) fachhydraulic unit:mit Lufkühlung hollow chuck:hydraulisch, 150 mmtool holder:4 Stück Innen (Ø32mm), 6 Stück Außen, 2 Stück Plan bar loader:optional Tool setter:manuel soft jaw:1 Satz BORING SLEEVES :6 Stk. (Durchm. 8, 10, 12, 16, 20, 25 mm) Contains:1.Control system Fanuc 0i-TD (8.4"COLOR LCD)2.Spindle motor 7.5/11KW Fanuc â8/8000i3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm)4.X/Z-Axis stroke 155/220 mm5.X/Z Axis rapid traverse 20/20 m/min6.Hyd.hollow chuck 6" x 3 jaws7.Hydraulic turret system 12 stations8.Hyd. Unit for chuck with air cooler9.Without tailstock10.Standard spla ...
turning diameter:300 mmtotal power requirement:2 x 160 kWweight of the machine ca.:2 x 18 tswing dia.:350 mmstroke of vertical slide:250 mmstroke of the horizontal slide:280 mmspindle diameter in front bearing:140 mmspindle turning speed range:80-1120-2800 U/minAvailable from 01.08.2024Flexible rotating cells DV-32-2 In day frame construction consisting of: 2 CNC vertical lathes each with: 1 main spindle and 1 cross slide with CNC Sinumerik 3T suitable for synchronous or asynchronous machining processes With integrated loading and measuring automation
Clamping plate diameter: 3200 mm Max. workpiece diameter: 6300 mm Max. workpiece height: 2500 mm Max. workpiece weight: 5000 kg Stand movement:: 1550 mm Crossbar movement: : 1900 mm ... más información
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible. ... más información
turning diameter:420 mmturning length:1130 mmcontrol:Heidenhain manual plus 4110 centre distance with tail-stock:1200 mmspeeds:3-3000 1/minspindle bore:51 mmcutting speed:1-9999 konstant m/mincentre height:210 mmbed width:290 mmspindle head:DIN 55027 Gr. 6 total power requirement:11 / 9 kWweight of the machine ca.:3500 kgdimensions of the machine ca.:2,60 x 1,25 x 1,65 hoch mteach-in lathe,3-jaw-chuck dia. 210mm,PARAT toolholder - system incl. tools (see photo), cooling system,accessories (see photo)no hour meter
The machine is in good technical condition. Max. diameter above bed: 1050 mm Distance between spikes: 2000 mm Diameter above transverse ram: 727 mm Max. workpiece weight: 5000 kg Spindle caliber: 102 mm Shaft motor power: 22 kW Tailstock: yes Chuck type: 3 jaws Length x width x height: 4860 × 1970 × 1500 mm Weight: 7600 kg Upon prior agreement, the possibility of inspection while in operation.
X-travel: 195mm, y-travel: 85mm, z-travel: 405mm, controls: GE Fanuc Series 21i-TB, weight: 6.3t, including 1x jaw chuck, 2x driven tool for face machining, 3x driven tool for cross machining, 7x internal drilling holders, 9x turning holders, with documentation, on-site inspection is possible, the machine is defective and needs to be overhauled, the turret no longer moves.