prensas usadas para la venta

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication

automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos

automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t

automatic baler Manufacturer: PAAL Type: KONTI 600 G/S/K with cross-binding Year of construction 2012 Operating hours: approx. 44,700 hours specifications: Press force: 1,546 kN System pressure: 315 bar Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW Pump capacity: 3 x 420 Ltr. Oil tank volume: 3,100 ltr. Throughput:approx. 780 m³/h Capacity at idle: approx. 1,220 m³/h Capacity at 35 kg/m³: approx. 26.5 t/h Output at 60 kg/m³: approx. 44.0 t/h Output at 100 kg/m³: approx. 69.0 t/h Control: Siemens S7 Setting: 5-fold vertical Additional 4-fold automatic horizontal tying Bale weight: approx. 800 - 1,250 kg depending on the material to be pressed and bale length Machine weight: up to approx. 42 t Includes a top pressure plate slot cover Printing plate was renew ...

Baler Paal Likon 80/60, built in 2004, very good condition Specifications: Manufacturer: Paal Type Likon 80/60 Year of construction 2004 Hours 13265 Press force 60 t Drive power 75 kW Total power 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, length variable Setting 4-fold automatic Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Version with a 520 l pump, drive 75 kW, for an increase in power to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale ...

Baler Austropresses, type APK E55-1400, year of manufacture 2016, with free-baling device Manufacturer: Austropressen Type: APK E-55-1400 Year of construction: 2016 Propulsion: 2 x 22 KW Press force: 55 t Filling opening: 1400 x 1020 mm (LxW) Binding: 5-fold, automatic Throughput at 35 kg/cbm: 7.5 t/h 60 kg/cbm: 13.2 t/h Bale weight: 450- 550 kg Bale dimensions: 1100 x 750 x max. 1600 mm Machine dimensions: 8850 x 2700 x 3400 mm (LxWxH) Machine weight: approx. 14,100 kg Drive 2x22kW for maximum energy efficiency. With low material loading, the machine works with only 22kW drive. Only when the filling quantity is increased is the full drive activated in order to achieve the required throughput capacity. Materials: paper, cardboard, foil, plastic, PET bottles, fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no li ...

Specifications Maximum pressure: 20 tons Press force: 2.6 kg/cm² Bale size: 1100 x 700 x 700 mm Bale weight: approx. 250 kg Power supply: 400V / 4kW Year of construction: 1995 Machine is fully functional, after technical supervision.  ... más información

Albamat 550 V5 cardboard press with EKZ 1400 shredderRA2285Type: Albamat 500 V5 / EKZ 1400Year of manufacture: 2019Condition: usedOptical: traces of useHeight: Press: 4450 mm without housing, 5550 mm with housingWidth press: 2350 mmDepth press: 5613 mmPressure: 60t / 600 kNRecommended maximum carton size: 960 x 630 x 420 mm. Depending on the housing, longer cartons are also possibleShredder feed opening 1435 x 990 mmMotor power: 22 kW baler, 1.1 & 7.5 kW shredder.Bale size: 1050 x730 x 1200 mm (depending on filling)Cycle time: 25 s, 3.3 t/h at 35 kg/m³Dead weight: 8500 kg baler + 1000 kg shredder + feed hopperStart of baling process: PhotocellBale tying: 5 x 3.1-3.8 mm wire, fully automaticincluding:Oil cooler and oil heater for outside temperaturesFree pusherFeed belt controlPrices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Constructio ...

Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.

Horizontal hydraulic baling press with manual tying, brand: HSM, model: HL4010 Re, engine: 9 KW (12 hp), year: 2013, bale dimensions: 750x750 mm, bale weight: 280-300 Kg. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating  ...

Technical data baler:Manufacturer unoTech GmbH, Niederlangen, GermanyTyp 120 V5Year of construction 2009Press force main press 100 tonsSpecific press force 145 N/m²Max. cutting force 120 tonsPress force free stamper 25 tonsFeed channel 2,000 x 1,020 mm (l x w)Capacity per cycle time 1,5 m³Theoretic throughput rate 650 m³/hourBale size 1,100 x 750 mm (w x h)Driving motor 2 x 75 kWConnected load 160 kWRated current 280 ATying system 5-fold vertical, fully automaticThroughput rate at abulk weight of 20 to 30 kg/cbm up to 15 tons/hourbulk weight of 35 to 50 kg/cbm up to 23 tons/hourbulk weight of 60 kg/cbm up to 27 tons/hourbulk weight of 100 kg/cbm up to 44 tons/hourBale weight 600 up to 900 kg, depends on materialSPS controller (manuf., type) Siemens S7 300Operating panel (manuf., type) Siemens SIMATICTransport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x w x h)Machine weigh ...

Briquette diameter: mm 180, Briquette diameter large mm 195, Force main cylinder kN 8,500, Briquette density steel, cast iron Kg/dm 5,5, Briquette density aluminium Kg/dm3 2,4, Briquette density brass, copper Kg/dm3 7.0, Capacity steel/cast iron t/h 7.5, Capacity aluminium t/h 3.5, Capacity brass/copper t/h 8.0, Drive power standard kW 180, Footprint m x m 6.5 x 8.5, Machine weight t 45, Year: 1999, Immediately available, Briquette diameter: mm 180, Year: 1999

Specifications Maximum pressure: 30 tons Press force: 3.13 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 300-350 kg Power supply: 400V / 5.5 kW Year of construction: 1999 Productivity: approx. 3 bales/hr If you have any questions, please call us: +48 696 072 985  ... más información

Baler HSM VK 4212, built in 2013, including spare parts package Manufacturer: HSM Type: VK 4212 Year of construction: 2013 Hours: 17,321 Press force: 42 t Drive power: 22 kW Idle cycle time: 12.7 s Filling opening: 620 x 1140 mm (WxL) Capacity: 50 kg/m³: 9.05 t/h Bale size: 700 x 800 x 600-1200 mm Binding: 4-fold, automatic Transport dimensions: approx. 7,200 x 2,000 x 2,100 mm (LxWxH) Weight: approx. 6,300 kg Materials: paper, cardboard, die-cuts, foil

Specifications Maximum pressure: 78 tons Pressing force: 95 tons/m² Duct cross-section: 750 x 1100 mm Bale weight: 450-600 kg Power supply: 400 V/ 55 kW Year of construction: 2001 Number of ties: 5-fold vertical, Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 24 tones  ... más información

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Baler Presona LP 50 EH2, built in 2005, baling force 50 t Specifications: Manufacturer: Presona Sweden Type LP 50 EH2 Year of construction 2005 Press force 50 t Drive 37 kW Throughput rates at bulk density of 50 kg/m³: 11-13 t/h 100 kg/m³: up to 25 t/h Filling opening: 1250 x 1100 mm Bale size 1100 x 720 mm Bale weight: 400-550 kg Bonding 5-fold Transport dimensions approx. 8100 x 2120 x 2680 mm (LxWxH) Weight approx. 15 t The press is currently still in operation and can be viewed on request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.