subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 505)
Builder: SEKO Model: SAMURAI5 650/250 Engine: DIESEL 118 kW – 160 HP Data: L. 8.000 x W. 2.900 mm x H. 3.200 mm Hourly Production: 25 m³/h Shredding System: 2 COCHLEAS and 198 BLADES Weight: 9.500 kg ... más información
Builder: KOMPTECH Model: TOPTURN X67 Year: 2011 Operative Hours: 2.700 h Country: ITALY ... más información
Pressing force: 30t, max. bale dimensions: 1525x800x1100mm, chamber width: 1520mm, chamber height: 560mm, bale weight cardboard/ plastic: 300-400/ 400-600kg, stroke: 1000mm, connected load: 4kW, weight: 1.78t, on-site inspection is possible. ... más información
Max. bale dimensions: 700x490x730mm, bale weight: 40-60kg, length: 710mm, width: 1000mm, height: 1920mm, weight: 550kg. ... más información
There are two shredders available, blade width: 3x 46mm, power: 30kW, machine 2 has a cracked casing and needs overhauling. ... más información
Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm. ... más información
Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h. ... más información
With conveyor belt, blower, shredder, screw, drum and screen. ... más información
Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. ... más información
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure. ... más información
Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar. ... más información
Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia. ... más información
Conveyor belt Hazemag Brand: Hazemag Type: HAZ HAZ1= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. HAZ2= A.A length: 23,000 mm, belt width: 1000 mm, drive: 18 kW. HAZ3= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. HAZ4= A.A length: 18,500 mm, belt width: 800 mm, drive: 5.5 kW. HAZ5= A.A length: 14,500 mm, belt width: 1000 mm, drive: 11 kW. HAZ6= A.A length: 15,000 mm, belt width: 800 mm, drive: 7.5 kW.
ATLAS 350 MH blue, Technical data:, Engine:, Power: 180 kW/245 hp, Model: Deutz/Turbocharger, Cooling system: Water-cooled, Year of construction: 2016, Model: 2017, Operating hours: 7500 h, Weight: 38 tons, Machine is available immediately., Machine is in very good used condition., power: 180 kW/245 hp, model: 2017, Cooling system: Water cooled, Year of construction: 2016, model: 2017, Operating hours: 7500 hours, Weight: 38 t
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](https://www.germanplast.eu/listings/5003567-germanplast-vibrat ing-screen-round-type) (available separately), This machine is to be electrically conne ...
Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/yearFor sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components:1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW302 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations1 piece ventilation sy ...