Fabricante:
(Categoría: 103)
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective. ... más información
Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.
Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible. ... más información
Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced. ... más información
Control system: Contour 2 lid, the machine has no operating hours counter, the control system parameters must be reloaded onto the machine, the buffer battery is empty, an on-site inspection is possible. ... más información
Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced. ... más información
X-travel: 2000mm, y-travel: 1000mm, z-travel: 1000mm, table dimensions: 2200x1000mm, number of T-slots/ width/ distance: 7/ 22/ 140mm, max. workpiece weight: 7.2t, connected load: 40kW, weight: 17t, operational hours counter machine on: 33,852h, with documentation and accessories, without operating hours counter, has been regularly serviced, on-site inspection is possible, available from May 2024.
Control: Heidenhain TNC 186, length: 2600mm, width: 3000mm, height: 1900mm, weight: 2.4t, with documentation, and SK40 mountings, the machine is electrically and control-technically not ready for use, mechanically the machine is in order, maintenance was carried out regularly, an inspection on site is possible.
Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible. ... más información
X-travel: 1000mm, y-travel: 600mm, connected load: 32kVA, length: 3200mm, width: 2100mm, height: 2900mm, weight: 6.2t, with documentation and measuring probe, the tool changer is defective, otherwise the machine is functional, an on-site inspection is possible. ... más información
Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible. ... más información
X-travel: 1000mm, y-travel: 1800mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-12,000/min, weight: 18t, operational hours counter controls/ machine/ spindle: 71,517/ 70,339/ 37,470h. ... más información
Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.
Travel X/Y: 500 mm/200mm, max. speed: 4000 rpm. Max. Workpiece weight: 60kg, max. workpiece diameter/length: 225mm/20mm, table dimensions X/Y: 600mm/200mm. Dimensions X/Y/Z: 2800mm/2850mm/1650mm, weight: 1800kg. Loose contact on the magnet, machine is used with a sine table. ... más información
Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available. ... más información
Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... más información
Travel X/Y/Z: 1050mm/530mm/630mm, rapid traverse X/Y/Z: 24m/min, max. spindle speed: 10000rpm, max. tool diameter/length: 90mm/300mm, max. tool weight: 7kg, tool storage: 30, tool holder: ISO40. Table dimensions X/Y: 1150mm/560mm, max. table load: 700kg. Dimensions X/Y/Z: approx. 4300mm x 2300mm x 2600mm, weight: approx. 7800kg. Including suction, 10.00 spindle, IKZ (stronger pump installed). Noises on the spindle, probably caused by ball bearing damage.
Travel X/Y/Z: 800mm/690mm/630mm, max. spindle speed: 15000 rpm, drilling capacity: 30mm. Table size X/Y: 630mm/630mm, max. workpiece weight: 1100kg, control: Siemens Sinumerik. Dimensions X/Y/Z: 6000mm/2900mm/2400mm, weight: approx. 25000kg. Spare parts available. Including chip conveyor and separate coolant system.
Traversal X/Y/Z: 365mm/185mm/360mm, Speed range: Various speeds depending on the gear stage: BC - 115/230 rpm, AC - 290/580 rpm, BD - 360/720 rpm, AD - 875/1750 rpm, measuring system: SINO SDS2MS, spindle orientation: horizontal/vertical. Control panel: Features stop, emergency stop and direction control. On-site inspection is possible.
Control system: CNC532, axes: 3, operating hours: 19565h, travel X/Y/Z: 600mm/400mm/500mm. ... más información