subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Stock number: 3879 CNC LATHE Manufacturer: Victor, Type: Vturn 26 Machine NO.: UC-1892, Year of manufacture: 1995 Specifications: Max. circulation diameter 260 mm dia. Max. turn. About Bed 520 mm Dia. Turning length 610 mm Turning over planschlitte 350 mm dia. Main motor power 15 kw Main spindle speed range 35-3500 rpm Bore through drawing tube 75 mm dia. Tool turret with 10 stations Control Fanuc O-T Fabr. Operating hours spindle 7026 hours Accessories: Hydr. Chuck main spindle 250 mm dia Chip conveying. Cooling water system. Tailstock Length: 4500 mm, Height: 1950 mm, Width: 2000 mm, Weight: 6000 kg
turning speeds: 5.000 U/mincontrol: Siemens - - -: - - - - - -CNC Turning- and Milling Center | DMG - CTX 420Additional equipment:- C-Axis with Driven tool positions- Y axisScope of delivery / Accessories: - 1x jaw chuck, - 1x collet chuck, - 10x rotary holders, - 8x normal angle holders, - 3x driven angle holders, - 3x driven forehead holdersThe machine has only 9.931 H spindle hours.The machine is in a well-maintained condition andcan be inspected at any time under power.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: CTX420 | CTX-420The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... más información
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... más información
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... más información
Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders. ... más información
Controls: Siemens S5, length: 7100mm, width: 2600mm, height: 2500mm, weight: 10.6t, with Bar Loader Iemca PRA 40/42/F, documentation, control cabinet, hydraulics, with bar guide and chip and coolant disposal was maintained regularly. ... más información