subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 301)
Operational pressure: 210bar, weight: 4t, with documentation, without accessories. ... más información
Operational hours counter: 59,129h, with Handling PSA 2080. ... más información
Hydraulic pressure: 210bar, weight: 3.1t. ... más información
Hydraulic pressure: 210bar, weight: 3.7t. ... más información
Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm. ... más información
Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021. ... más información
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. ... más información
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t. ... más información
Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation. ... más información
Screw diameter: 35mm, max. opening path: 350mm, length: 5017mm, width: 1565mm, height: 2156mm, weight: 6t, operational hours counter: 124,862h, with hydraulic core pull, 2x air valve DS, hydraulic valve gate and documentation. ... más información
Screw diameter: 30mm, max. opening path: 350mm, tool clamping plate dimensions: 446x446mm, weight: 2.25t, operational hours counter: 81.353h, with machine hopper, hydraulic core pull, air valve DS, pneumatic valve gate and documentation. ... más información
Screw diameter: 25mm, max. opening path: 275mm, tool clamping plate dimensions: 400x400mm, weight: 1.9t, operational hours counter: 111.519h, with hydraulic core pull and documentation. ... más información
Screw diameter: 22mm, max. opening path: 275mm, tool clamping plate dimensions: 400x400mm, weight: 1.9t, operational hours counter: 78,700h, with machine hopper, hydraulic core pull and documentation. ... más información
Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.
Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.
Clamping force: 1100kN, tie bar distance: 470x470mmm, opening stroke: 1000mm, screw diameter: 40mm, max. stroke volume: 201cm³, controls: MC5, length: 4600mm, width: 2650mm, height: 2250mm, weight: 7.9t, operational hours counter: 65,200h, with Krauss Maffei LR100, 6x hoist channel control points, 4x core pull, blow-out unit, pressure accumulator, separating flap, energy saving circuit, ALS interface, 20mA interface and colour metering unit interface.
CONTROLS CNC controls UNILOG B6 MOULD CLAMPING UNIT locking force: 160 to die opening stroke max.: 650 mm mould height min.: 300 mm mould height max.: 950 mm max. distance between tool-plates: 950 mm space between tie bars L1: 570 mm space between tie bars L2: 520 mmINJECTION UNIT Diameter of screw: 40 mm Injection pressure: 2100 bar Shot volume: 251 cm³ Shot weight max. (Polystyrol): 228 gHYDRAULIC UNIT oil volume: 400 ltrELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5000 mm space requirements -front/back-: 1650 mm total height: 2140 mm total weight approx.: 7300 kgMachine in very good condition (= ph ...
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible. ... más información
CONTROLS CNC controls UNILOG B6 MOULD CLAMPING UNIT locking force: 60 to die opening stroke max.: 450 mm mould height min.: 200 mm mould height max.: 650 mm space between tie bars L1: 370 mm space between tie bars L2: 320 mmINJECTION UNIT Diameter of screw: 25 mm Shot volume: 61.4 cm³ Shot weight max. (Polystyrol): 55.9 gELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3515 mm space requirements -front/back-: 1321 mm total height: 1940 mm total weight approx.: 3000 kg
There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible. ... más información