This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set à 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below. Important remark: The injection unit is leaking, there is a cost estimate from Arburg for approx. 15,000 euros net including assembly. This defect has not yet been rectified as the machine is not currently being used. The sale does not include the housing, any hoppers ...
This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. In the current set up, the machine is not CE certified to work stand alone. There is a quote for retrofit the machine to have it CE certified for 3.000â¬
This ARBURG Allrounder 630S 2500-800 injection moulding machine was manufactured in May 2016. It offers a robust 2750kN clamping force, with a hydraulic drive system and precise control features, including 18 hot runner control zones. Key specifications include 45mm screw diameter, a 318cm³ dosing volume, 2470 bar maximum injection pressure, and a 242 cm³/s injection speed, ensuring high performance and consistent quality in production. Furthermore, its equipped with a Multilift Select robotic system, enhancing automation and efficiency in handling. The ARBURG Allrounder machine we have for sale is tailored for high-volume and intricate moulding operations. It is in very good condition, and has low hours (only 4507 automatic hours) as it was mainly used as technical center machine for sampling and tryouts. Contact us for more information about this injection moulding machine. See origi ...
This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.
This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).
This ARBURG Allrounder 420S 1300-675 Injection Moulding Machine was manufactured in 2004 in Germany. It has a clamping force of 1300 kN and is equipped with a 55mm screw with 2080 bar injection pressure. The open stroke is 575 mm and the mould height is min. 275mm. The machine is controlled by an ARBURG SELOGICA control unit and has operated 53425 hours.
This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. The machine has a clamping force of 3200 kN and a srew diameter of 60 mm.
This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.
This ARBURG Allrounder 420 C 1000 - 290 Golden Edition Injection moulding machine was manufactured in 2022 in Germany. It is equipped with a Servo-controlled injection unit which has clear distance between tie bars of 420mm. This injection moulding machine has a clamping force of 1000 kN and features a plasticizing cylinder set of 30 mm screw diameter (without nozzle) in wear-resistant design for processing thermoplastics with corrosive and/or abrasive components, with a low to medium filler content of glass, talc orTiO2. It is included an ARBURG THERMOLIFT 100-3 and Temperature control unit (HB-Therm Thermo-5 HB-140Z1). In total is has operated 619h automatic, 891h pump and 81567 machine cycles. See shot weight specifications per material, nozzle and cylinder temperature guide values in photo gallery.
This Arburg 270 C 400-70 Golden Edition was manufactured in 2022. As an injection moulding machine, it features a clamping force of 400 kN and includes a clamping plate set with a centering diameter of 125mm. It also comes with a plasticizing cylinder set 78mm and an open nozzle 18mm with internal thread M24x1.5. With only 90 operating hours, the Arburg 270 C 400-70 Golden Edition machine we have for sale is as good as new. Contact us for further details.
This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.
This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.
Injection weight: 20 g Closing force: 250 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 380x380 Min mold height: 200 Control type: Selogica Language: German Installed power: 35 Working hours: 82,985 Libra: 2100 Dimensions: 3 x 1.1 Feed hopper: NO Core String: Yes Robot socket: Yes
Clamping unit Clamping force50 ton Opening stroke350 mm Distance between tie bars320 X 320 mm Mould height min.300 mm Mould height max.550 mm Platen size (h x v)446 X 446 mm Injection unit Screw diameter30 mm Injection volume85 cm³ Shot weight75 g Injection pressure2200 bar Measurements and weight Dimensions3,25 x 1.15 x 2,0 m Machine weight2250 kg
Clamping unit Clamping force50 ton Opening stroke300 mm Distance between tie bars370 x 370 mm Mould height min.200-400 mm Opening width500-700 mm Platen size (h x v)510 x 510 mm Injection unit Screw diameter25 mm Injection volume59 cm³ Shot weight54 g Injection pressure2500 bar Measurements and weight Dimensions4,2 x 1,5 x 2,1 m Machine weight3740 kg Additional information & extras Core pull1 pcs Accumulator1 pcs Robot ProducerSepro TypeSR 55 Year2020 Weight56 kg
Description: SPECIAL EQUIPMENT increased locking pressure 50m, t., large injection unit 210 Screws D =35mm injection weight in PS 120gr. Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,750 mm, weight approx.: 2,100 kg
Description: only approx. 35,000 operating hours very good condition as can be seen in the pictures Machines that come from the seller who do not allow anyone into their production for espionage reasons or do not allow any contact with the staff, can only be handed in with the note 'No information about completeness and function' untested.Without operating instructions.However, operating instructions can be copied from other machines. Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,750 mm, weight approx.: 1,900 kg
Description: NEW! Partition plane injection device 210, only fits an A 270 Multronica with a 210 injection unit packed in a box 600x600x300mm Approx. Onsite Dimension. (l x w x h): 600 x 600 x 300 mm, weight approx.: 40 kg
Description: Device for spraying into the _parting plane is somewhat dirty and rusty due to long storage Approx. Onsite Dimension. (l x w x h): 500 x 500 x 200 mm, weight approx.: 20 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø x 40 mm SN 52331 -Heating power: 350 W -Voltage: 230/250V -Number: 1x heating tape available -Price per piece -Dimensions: 200/130/H40 mm -Weight: 0.2 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø50 x 34mm -Heating power: 310 W -Voltage: 220V -Number: 1x heating tape available -Price per piece -Dimensions: 220/80/H40 mm -Weight: 0.2 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 130 mm -Item No.: 27.485 -Heating power: 1050 W -Voltage: 230/250V -Number: 2x heating tape available -Price per piece -Dimensions: Ø105 x 130 mm -Weight: 1.1 kg
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 175 mm -Item No.: 14.587 -Heating power: 1400 W -Voltage: 230V -Number: 3x heating tapes available -Price per piece -Dimensions: Ø105 x 175 mm -Weight: 1.4kg
Control, circuit boards, spare parts for Arburg, injection molding machines -Type: ARB 389 D KPL -Weight: 0.5 kg
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 735/665/H185 mm -Weight: 230 kg
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm -Dimensions: 320/320/H163 mm -Weight: 20 kg
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: 490 x 490 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 490/490/H400 mm -Weight: 236 kg
This Arburg Allrounder 420 C 1300-350 injection moulding machine was manufactured in 1998. It features a clamping force of 1300 kN and offers screw diameters of 35, 40, and 45 mm, allowing versatile moulding capabilities. The machine includes a Schuma conveyor belt and optional Geiger Handling, enhancing operational efficiency. With a robust design and substantial injection pressures, its ideal for precise plastics processing. Consider the Arburg Allrounder machine we have for sale. Contact us for more information.
This Arburg ALLROUNDER 1200 T 800 - 70 Injection moulding machine was manufactured in the year 2017 in Germany and has 2090 pump hours. The machine has a clamping force of 800 kN, is in very good condition, and is well maintained. This Injection Moulding Machine is not CE certified and will be sold without CE Certification. It was part of an automation solution in one production cell. Being sold now as single machine it is ideal to integrate in an existing production line. The buyer is responsible for the required CE certification.
This injection moulding machine, the ARBURG 420C-1000-250, was manufactured in 2001. It is designed to deliver consistent performance and reliability for various plastic manufacturing applications. The machines robust design and ease of operation make it a valuable asset for producing high-quality moulded products. The ARBURG 420C-1000-250 machine we have for sale is well-maintained and ready to meet your production needs effectively. Contact us for more information.
This used injection moulding machine was manufactured in 1999. An ARBURG 420C-1000-250, its designed for precision and efficiency in production. Ideal for a wide range of plastic moulding applications, this machine offers exceptional precision and ease of use. This particular machine represents a valuable addition to any production line. Consider the ARBURG 420C-1000-250 machine we have for sale as a strategic investment in your manufacturing capabilities. For further information, please contact us.
This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for precision and reliability in production. Notably, it includes handling for enhanced efficiency, making it an excellent addition to any production line. The ARBURG 420 C 1000-250 machine we have for sale stands as a testament to ARBURGs engineering excellence and durability. For further information, please contact us.
Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used material: PBT GF 30 ABS/PA PP Service history: 3.2015 – Replacing the CF card reader with a floppy disk drive 5.2013 – Machine calibration 5.2009 – Machine calibration
Injection weight: 17 g Closing force: 400 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 385x385 Min mold height: 225 Control type: Selogica Tongue: English,Other Installed power: 16.4 Libra: 2040 Dimensions: 1.3 x 3.1 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes
Arburg 520C-2000-675 Shot weight: 240 g Closing force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Column spacing: 520 x 520 mm Plate size: 715 x 715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 126,766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Robot nest Air valve
Injection weight: 191 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 470x470 Size of plates: 650x650 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 15kW+ 14 Working hours: 36.211 Libra: 5200 Dimensions: 5m x 1.6 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes
Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Injection: Screw diameter: 55 mm cm3: 558 Bars: 2380 General: Closing weight: 14 Tons Dimensions length: 6.7m Dimensions width: 2.25m Dimensions height: 2.3m Options: Cores: 1 Robot interface: no Bi metal: yes 2 blow guns
Injection weight: 141 g Closing force: 1,500 kN Screw diameter: 35 Injection pressure: 2000 Column spacing: 520x520 Size of plates: 688x688 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 33.9 Working hours: 45343 Libra: 6490 Dimensions: 4.9 x 1.7 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes
Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 615 x 615 Clearance between columns (hxv) [mm] 420 x 420 Min./max. mold height [mm] min 250 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 13.8 Dimensions and weight Net weight with control cabinet [t] 4.33
Injection weight: 487 g Closing force: 1,500 kN State: Used Screw diameter: 60 Injection pressure: 1390 Column spacing: 520x520 Size of plates: 700 x 700 Control type: Selogica Installed power: 74 Working hours: 63,600 Libra: 7300 Dimensions: 6 m x 2.4 m Feed hopper: NO
Working industrial used Visible by appointment Material preheater Arburg brand
Control type: SELOGICA TOUCH Number of hours: 35,000 hours Closing force: 80 T Opening stroke: 500 mm Between columns: 470 x 470 mm Tray dimensions: 637 x 637 mm Mini/maxi mold: 250 mm Max distance between trays: 750 mm Injection: Screw diameter: 30 mm Screw length: 23.3/D cm3: 106 Bars: 2500 General: Motor power: 18.5 kW Heating power: 6.4 kW Closing weight: 3.5 Tons Injection weight: Dimensions length: 4 m Width dimensions: 1.3 m Dimensions height: 2 m Options: Cores: 1 Robot interface: YES Bi metal: YES
Injection Weight: 434g Closing force: 2,000 kN Screw diameter: 55 mm Injection pressure: 1650 bar Column spacing: 520x520 mm Board size: 728x728 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 80000h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, ticketing snail
Closing force: 60 T Opening stroke: 300 mm Between columns: 370 x 370 mm Tray dimensions: 510 x 510 mm Min/max mould: 200/400 Max gap between trays: 700 mm Injection: Screw diameter: 30 mm Screw length: 20/D cm3: 85 Bars: 2000 General: Motor power: 19kw Heating power: 9.4kw Closing weight: 4 Tons Injection weight: 77 GRAMS Dimensions length: 3.5m Dimensions width: 1.4m Dimensions height: 1.8 m Options: Cores: 0 Robot interface: yes Bi metal: yes Others: 1 blow gun
Type of control: SELOGICA Number of hours: 28,000 hours Closing force: 250 T Opening stroke: 550 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Mini mold: 300/750 mm Max distance between trays: 1300 mm Injection: Screw diameter: 60 mm Screw length: L/D cm3: 664 Bars: 2000 General: Motor power: kw Heating power: kW Closing weight: 14Tons Injection weight: Dimensions length: 6.7m Width dimensions: 2.25m Dimensions height: 2.3m Options: Cores: 1 Robot interface: no Bi metal: YES Others: 2 blowguns
ARBURG 400T 820S 4000/1300 YEAR 2014 Year of manufacture: 2014 Type of control: SELOGICA Number of hours: 31,086 H Closing force: 400 T Opening stroke: 700 mm Distance between tie-bars: 820 x 820 mm Plates dimensions: 1171 x 1171 mm Min/max mould: 850 mm Max gap between plates: 1550 mm Screw diameter: 60 mm Screw length: 20/D cm3: 664 Bars: 2000 Motor power: 55kw Heating power: 23kw Closing weight: 20 Tons Injection weight: Dimensions length: 6.5m Dimensions width: 2.4 m Dimensions height: 3.5 m Options: Cores: 2 Robot interface: yes 1 blow gun
Type of control: SELOGICA Closing force: 150 T Between columns: 470 x 470 mm Injection: Screw diameter: 60 mm Bars: 2000 General: Motor power: 45 kW Heating power: 25.9 kW Closing weight: 12 Tons Injection weight: Dimensions length: 7m Width dimensions: 1.70m Dimensions height: 2.2m Options: Cores: 2 Robot interface: yes Bi metal: yes
Arburg 520C 1500 800 injection molding machine year 2005 Can be seen upstream
Arburg 570C 2200-1300 Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 664 Injection weight [g] 558 Injection pressure [bar] 2000 Dimensions and weight Net weight with control cabinet [t] 9.3 Dimensions (length x width x height) [m] 6.16x1.91x2.39 m Additional equipment: Hybrid machine: fast, energy-saving Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Main motor of the machine - servo motor driven by inverter - energy saving
Closing force: 150 T Between columns: 570 x 570 mm Injection: Screw diameter: 60 mm Bars: 2000 General: Motor power: 45 kW Heating power: 25.9 kW Closing weight: 12 Tons Injection weight: Dimensions length: 7m Width dimensions: 1.70m Dimensions height: 2.2m Options: Cores: 2 Robot interface: yes Bi metal: yes