Model
(Manufacturer: D SYSTEMS)
The ProJet 1200 from 3D Systems is smaller than a coffee machine, is suitable for daily use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 micron (effective 585 DPI), Vertical construction speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL, Vertical build speed: 14mm per hour
ProJet 860Pro ColorJet Printer 3D printer used from 3D Systems for sale., Accessories: depowdering station, All specifications and operating/installation conditions according to manufacturer brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Dimensions machine in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Machine dimensions in mm (wxhxd): 1190x1160x1620
3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.
3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.
3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.
3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.
Used ProJet⢠Parts Washer from 3D Systems for sale. Fully functional, with signs of use., [Buy 2011 3D Systems ProJet⢠Parts Washer now](.layerbylayer-shop/p/2011-3d-systems-projet-tm-parts-washer-gebra uchter-zustand)
2017 ProJet 2500Plus, defective as a spare part carrier or for repair. Machine reports error with support feed. According to 3D Systems, repair costs can be between â¬1,000 and up to â¬7,000. Device was last serviced in 2023 and has printed components in good quality., Possibly defective components:, - DMC Board, - Carriage Board, - PDAC-Board, - Umbilical track, [Buy 2017 3D Systems ProJet 2500Plus now](https://www.layerbylayer-shop/p/2017-3d-systems-projet-2500plus), Technology: MultiJet Printing
Used Blow Molding Machine SMI SR10HP year 2015 Firstly the SMI SR10HP produced in 2015 emerges as an advanced solution for PET container production This analysis aims to detail its technical specifications and operational features It significantly highlights the machine s efficiency and productive capacity in industrial environments Productive Capacity and Versatility of the Blow Molding Machine SR10HP Importantly the machine achieves a remarkable speed of 17 000 BPH showcasing its high capacity It adeptly processes a variety of container sizes including 0 20 L 0 33 L and 0 6 L thereby offering considerable flexibility in production lines Configuration and Components Moreover it boasts ten cavities for simultaneous preform processing which optimizes production time Integrated systems such as a loader tipper and unscrambler automate preform handling Consequently these systems minimize man ...
Used Shrink Wrapper KHS Kisters TSB 035 B 1800 box hour Technical Specifications and Details This machine is a specialized packaging machine that efficiently shrink wraps bundled products Notably KHS manufactured this model in 2004 to meet the demands of high performance production lines This model handles a high operational capacity reaching up to 30 bundles per minute or 1800 boxes per hour Film and Tray Features of the Used Shrink Wrapper KHS To bundle products securely the Kisters TSB 035 B model uses neutral shrink film Additionally this machine includes a tray configuration that enhances the versatility of the bundling process and consequently adapts to various production requirements Its durable structure therefore protects products effectively during transport and storage Machine Configuration and Feed Type The Shrink Wrapper KHS Kisters meanwhile comes configured with a direct f ...
Used ozone water disinfection equipment The ozone water disinfection equipment produced by UNIVERSAL AQUA in 2009 represents an advanced solution for the treatment of water In facts it is used in production processes particularly in the bottling industry This equipment is capable of delivering a capacity of 5 000 liters per hour making it indeed ideal for medium sized systems The unit is carefully designed to ensure optimal efficiency in generating and infusing ozone into the water Ozone is a powerful oxidizing agent that acts effectively in water disinfection especially eliminating bacteria viruses and microbiological contaminants Components and operation This equipment consists above all of a high quality ozone generator a system for mixing ozone with process water and an advanced control system The ozone generator is designed to produce ozone reliably and continuously consequently ens ...
Used Chiller ICS iC 412 Year 2018 Introduction to the Used Chiller ICS iC 412 Year 2018 The used chiller ICS iC 412 year 2018 manufactured by ICS Cool Energy is a high efficiency industrial cooling unit Specifically designed for applications requiring precise thermal control it offers a cooling capacity of 473 kW Moreover its compact dimensions of approximately 760x1790x1300 mm Depth x Width x Height facilitate integration into various plant configurations Consequently it serves as an adaptable solution for diverse industrial needs Indeed its design addresses space constraints commonly encountered in industrial settings Technical Features of the Chiller This used chiller ICS iC 412 year 2018 utilizes a cooling compressor complete with piping and optimizes the use of refrigerant R410A Furthermore users recognize R410A for its energy efficiency and reduced environmental impact The unit req ...
Used isobaric glass filling line PROCOMAC up to 14000 bph The used PROCOMAC isobaric glass filling line with a capacity of up to 14000 bph offers an advanced solution for glass filling Consequently this machine delivers high efficiency and versatility in handling various bottle formats and product types Technical Details of the Line the Isobaric Filling Line PROCOMAC The PROCOMAC isobaric filling line operates as a glass to waste system and has undergone recent servicing After the maintenance the line ran for only two days thereby proving its perfect functionality Therefore it stands ready for immediate dismantling and reinstallation at a new operational site Moreover the line fills at a capacity of 14000 bph for 0 25L and 0 30L bottles However for 1L bottles it handles 8000 bph This flexibility in turn enables the plant to adapt to different production needs whether for carbonated or no ...
Used bottling line SIDEL for carbonated soft drinks 20000 bph The used SIDEL bottling line for carbonated soft drinks with a capacity of 20000 bottles per hour offers a high efficiency solution for producing beverages in PET bottles In addition this line integrates specialized machines that deliver optimal performance in the production of carbonated drinks Each component ensures precision and reliability throughout the bottling process which is why the system is perfect for high performance industrial applications PET Bottle Stretch Blow Moulders Sidel first manufactured the PET bottle blower model SBO 14 Built in 2010 this machine shapes PET bottles from preforms through a stretching and blowing process The blower operates with an installed power of 545 kilowatts and a maximum current of 804 amperes As a result it runs at a frequency of 50 or 60 hertz using a three phase power supply Ho ...
General SKU251U329 LocationBarneveld MakeSterling Fluid Systems Sihi TypePLG 55316 Y 42 Mach.No.40000613-20-01 Pressure Working pressure0.04 Bar Vacuum possiblecheck Main Features MaterialMild steel/Stainless steel Volume180000 Ltr. Motor15 KW Specified Features - Vacuum pump MaterialMild steel, Stainless steel Pumpcheckthis vacuum pump comes with TÜV Number of pumps:1 Capacity180m³/h With motor15 kW, 1455 rpm, 400/600 volt, (Ex) InletDN50 OutletDN100 Information Year of construction1999 Mounted on framecheck Total height2,0 m Floorspace2,9x1,7 m Weight1530 kg ATEX compatiblecheck Extra Specificationsthis vacuum pump contains: GSD tube condensor, serial 475/1998, year of construction 1999, tube heating surface 2,3 m2, design pressure 6 bar, test pressure 7,6 bar, volume 6 ltr, temp. 90ºC, Shell volume 23 ltr, design pressure 6 bar, test pressure 7,6 bar, t ...
General SKU251U328 LocationBarneveld MakeSterling Fluid Systems Sihi TypePL 55316 Y4B Mach.No.40001276-10-01 Pressure Working pressure0.06 Bar Vacuum possiblecheck Main Features MaterialMild steel/Stainless steel Volume250000 Ltr. Motor11 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheckthis vacuum pump comes with TÜV Number of pumps:1 Capacity250m³/h With motor11 kW, 1460 rpm, 400 volt, (Ex) InletDN50 OutletDN100 Information Year of construction1998 Mounted on framecheck Total height2,0 m CEcheck Floorspace3,4x1,7m Weight1660 kg ATEX compatiblecheck Extra Specificationsvacuum pump comes with: AG. A. Hering tube condensor, type N-B 1,5/25-1L, serial 60/56471, year of construction 1998, tube heating surface 5,4 m2, design pressure 6 bar, volume 12 ltr, temp. 90ºC, Shell volume 40 ltr, design pressure 6 bar. Sterling filter, volume 70 lt ...
Thrust ball bearings, ball bearings HD-SYSTEMS 80-80-241967 Inner diameter (shaft): Ø 57 mm, shaft length: 36.5 mm, groove width: 16 mm outer diameter: Ø 197.5 mm height: 29 mm New ! Dimensions ( packaging ): 200 x 200 x 30 mm
Coupling, shaft coupling HD SYSTEMS 80-80-241967 coupling ring: diameter ( outside ): Ø 265 mm, flange diameter: Ø 218 mm diameter ( inside ): Ø 204 / 208 mm, serrated height: 50 / 62 mm bolt circle diameter: Ø 240 mm 14x bore: Ø 11.5 mm, with countersunk hole: Ø 18 mm, depth: 11 mm coupling bell: diameter ( outside ): Ø 199 mm, diameter ( teeth ): Ø 201 / 204 mm diameter ( inside ): Ø 196 mm height: 160 mm Flange diameter: Ø 126 / 65 mm bolt circle diameter: Ø 104 mm 12x bore: Ø 11.0 mm, 2x bore: Ø 7.0 mm Material: Steel New ! Dimensions (assembled): 265 x 265 x 175 mm
Temperature controller for infrared systems KRIEGER R1300-3-KR-1 180.004 Dimensions: 130 x 95 x 95 mm
(24x) Fixators machine base Manufacturer: BWF, Type: K III, Fixators, machine base for machine tools and systems Price per piece Items show contamination and signs of wear Dimensions: 240/140/H220 mm / 245/140/H100 1 piece Weight: 10.8 kg/piece 300x300x300 mm 300 kg unchecked loaded on truck
Features of this equipment: SLS (Selective Laser Sintering) technology: Laser sintering of plastic powder Material used: PA filled with glass beads Print volume: 330x250x440mm => minimum thickness 0.7mm Unsintered powder recycled and reused Direct use of STL files TECHNOLOGY: SLS PRINTER SERIAL NUMBER: 2001226104 ANNUAL MAINTENANCE CARRIED OUT UNTIL 2023 (REPORTS AVAILABLE) Equipment supplied -1 Prox 500 3D printer -2 MQC loader for supplying powder to the 3D printer and recycling the powder -3 SMC COOLING CIRCUIT for regulating the machine temperature -4 Donaldson powder residue suction device -5 Inert gas nitrogen generator (compressed air and electric) -6 Electric transformer -7 Carriage for positioning and retrieving finished parts by drawer. Machined parts are shown by way of example The cans shown in the photos will not be delivered with the printer. ...
Plasma cutting system with accessories The plasma cutting system consists of: 1 piece Plasma cutting machine ESAB UXL P EV 2000 built in 2006 1 piece Power source Hypertherm Powermax 85 1 piece Vision T5 control with touchscreen operation, latest design, built in 2022 1 piece Dodek suction table, for large-format support cutting area 1500x3000mm, sequentially flap-controlled, built in 2006 1 piece Dodek cyclone suction system with Donaldson suction filter technology, fan suction capacity without resistance approx. 5400m3/h, built in 2006 Plasma system : MAX Series SCOPE OF SUPPLY: Retrofit of CNC control Controller VISION™ T5c RETROFIT (AT SITE) OF EXISTING 1 PCE RETROFIT (AT SITE) OF EXISTINGMACHINE Next Generation Cutting Machine Controller Retrofit & Modernization of the existing Basic-Machine and the hereafter offered Equipment will be done at site. Estimated worki ...
2626 OMAX JetMachining Center Water jet system The machine has been completely overhauled and has very few operating hours. Machine type 2626. Size LxWxH 106х77х96. INNOMAX desludging system, OMAX EnduroMAX pump P5060 and INNOMAX abrasive conveying system also included. High-precision premium waterjet cutting The first-class OMAX JetMachining® Centre was developed for advanced systems, where performance and results are paramount. The OMAX JetMachining Centre is a true hard worker for production in any manufacturing environment and delivers: - Manufacturing high-precision multi-axis parts quickly and consistently with OMAX IntelliMAX® software - Improved efficiency with EnduroMAX® pumps that deliver the highest nozzle performance - Reduced maintenance with durable and hardwearing materials - Increased uptime through improved IntelliVISOR® system monitoring - Better end ...
3D Systems Projet MJP 2500 3D Printer the printer is refurbished with a new print head. This is a 3D Systems MJP 2500 Plus printer. This was overhauled in December 2022. Among other things, a new print head was installed. Since the general overhaul, the printer has run about 100 hours. The unit works perfectly ProJet® MJP 2500 Plus 3D printer system: - Installation space: 294 x 211 x 144 mm in X, Y, Z axis. - Layer thickness: 0.032 mm - Resolution: 800 x 900 x 790 dpi (X-, Y-, Z-axis) - weight: approx. 211 kg - Power supply: 230 V, 16 A, 50 Hz - Data connection: Ethernet TCP-IP, USB port - CE certified Material options - VisiJet® M2 Armor M2G-CL construction material - clear, flexible, ABS-like (HD + UHD) - VisiJet® M2 ProFlex M2G-DUR build material - clear, flexible, polypropylene-like (HD + UHD) - VisiJet® M2R-GRY construction material - opaque, gray, rigid (HD + UH ...
We have the 3D Systems ´Projet 3500 HD Max´ 3D printer. The machine has not even been installed yet. Never used, the 3D printer is new. Should be around 2014 year the machine is brand new, never used. So the working hour is 0. All accessories are available. The brand of 3D Printer is ´3D Systems Projet 3500 HD Max´. Currently, this model is produced under the name ´Projet MJP 3600W´. .3dsystems/3d-printers/projet-mjp-3600w-series Find more here - / Contact us at -
2019 WEMO 8-5 xDesign Type: 8-5 xDesign Year: 2019 Volts: 3X 400 VAC +N+PE 50Hz Amps: 16 Bar: 6 The 2019 WEMO 8-5 xDesign is a machine primarily used in the manufacturing industry, specifically for metal forming and bending applications. It is designed to automate the production process of forming metal sheets and components into specific shapes. Here are some key functions and features of the WEMO 8-5 xDesign: - Automated Bending: The machine is capable of performing automated bending of metal sheets, reducing the need for manual labor and increasing production efficiency. - Precision Forming: It offers high precision in forming metal components, ensuring consistent quality and accuracy in the final products. - Customization: The xDesign model is designed to be versatile, allowing for customization of the bending process to meet specific manufacturing needs. - Production Line In ...
2014 3D Systems Projet 650 pro (+ infiltration cabin) The infiltration cabin has an exhaust system and lighting. Furthermore, the infiltration cabin has a turntable (diameter 40 cm) and a UV lamp to cure UV curing infiltrates. In order to keep unpleasant odors, which are also not so healthy, away during infiltration, a self-built infiltration cabin belongs to the 3D printer. With the built-in airbrush compressor and spray gun, different infiltrates can also be applied to the model. Pictures of the printer and the infiltration cabin are attached. The dimensions of the infiltration cabin are wide 100 cm high 150 cm deep 80 cm The printer has a footprint of 254 x 381 x 203 mm and Ithas only 1050 operating hours. Find more here - /
Vacuum evaporator. The evaporator is from 2020 and has run for 40 to 50 hours so far, so it is like new. General information KORRODEST evaporator systems represent an interesting alternative to conventional chemical-physical treatment treatment plants, which are often unable to comply with the limit values required by law. Due to The purely thermally operating system means that no auxiliary chemicals are required for the treatment process, which are often are themselves harmful to the environment. Due to flexible manufacturing processes coupled with a wide range of available materials, almost all typical materials available, almost all aqueous solutions typically found in surface technology can be treated. can be treated. These operating instructions are intended for personnel trained in the handling of water-polluting, toxic or aggressive substances. and aggressive substan ...