used DAEWOO for sale

Magnetic drilling machine; Max. drilling diameter 35 mm drilling diameter; power 1600 watts; connection 230 Volt; magnet strength 16000 newtons; speed 810 rpm; drilling depth 145 mm; including oil reservoir for cooling and lubrication; belt for fall protection; Condition unused, in its original packaging

Unused.

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets of welding data memory, 2T/4T function, double pulse function VRD, 4 drive supply, 5 total support

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Mig Type: Yes; TIG Type: Yes; AC/DC: yes; Inverter type: Yes; Wire feed unit: Yes; Digital readout: Yes; connection: 380 V; Handbook available: Yes; Machine weight: 45 kg; size L: 1000 mm; dimension W: 500 mm; size H: 900 mm; description: unused,

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Description: Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L Connection voltage 230 V Battery 24V / 100Ah Brush diameter 510 mm Speed 175 rpm Suction power air 24 L / s Tank volume 50 / 50 liters Weight 160kg Dimensions L-W-H 1.1 x 0.52 x 1.0 m weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 520 x 1,000 mm

Description: Serial Number: AV5E0317 Type: MYNX 500 YOM:2000 CNC HEIDENHAIN 410 3AXIS Travels , X: 1020 mm , Y: 510 mm , Z: 575 mm Rapid Feeds X: 24 m/min , Y: 24 m/min , Z: 20 m/min Spindle speed: 1-8000 rpm , Spindle distance from column: 520mm Ball screw :  ,Ø40xP12/Ø40xP10 ATC 20 Total Power:  ,11 kw Power source: 380 v 50 hz Rated capacity: 35 kva Installed power: 11kw Chip conveyor weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 4,300 x 2,990 x 2,870 mm

rated capacity: 8,1 kVA voltage: 400 / 230 V frequency: 50 Hz tank capacity: 15 l engine output: 11 / 15 KW / PS weight of the machine ca.: 0,165 t dimensions of the machine ca.: 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L feed pressure: 14 bar liter capacity: 995 l connected load frequency: 400 V weight of the machine ca.: 200 kg dimensions of the machine ca.: 2,0 x 0,7 x ,125 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: max. 8,1 kVA capacity in kVA: bei 400 V - 7,5 kVA rated capacity: bei 230 V - 6,1 kVA power fuel: Diesel 0 tank capacity: 15 l 0: 11 KW cubic capacity: 498 ccm weight of the machine ca.: 165 KG dimensions of the machine ca.: 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: max. 8,1 kVA capacity in kVA: bei 400 V - 7,5 kVA rated capacity: bei 230 V - 6,1 kVA power fuel: Diesel 0 tank capacity: 15 l 0: 11 KW cubic capacity: 498 ccm weight of the machine ca.: 165 KG dimensions of the machine ca.: 0,8 x 0,65 x 0,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This DAEWOO PUMA 400 LA was manufactured in 2002. A lathe equipped with a FANUC Series 18i-T CNC, featuring a bar capacity of 90 mm and a Z-axis travel of 2200 mm. It includes a 12-position automatic turret, tailstock, and a conveyor. Suitable for diverse turning applications. Reach out for more information about this lathe.

This DAEWOO PUMA 250 M was manufactured in 1998. A lathe equipped with a FANUC 18-TB CNC, featuring a turning diameter of 355 mm and a length of 655 mm. It includes a 12-position automatic turret with driven tools, tailstock, and a bar loader LNS QUICK LOAD. Suitable for efficient and precise turning operations. Reach out for more information about this lathe.

This DAEWOO PUMA 300B was manufactured in 2002. A lathe featuring a FANUC 18i-T CNC, with a swing diameter over bed of 570 mm and a distance between centers of 650 mm. It includes a 12-position automatic turret, tailstock, and a bar capacity of 76 mm. Ideal for efficient turning operations. Contact us for further details regarding this lathe.

Daewoo Puma 1500SY still in use, under power. Low hours: 5450h Specs: - Spindle number : 2 - Main spindle type : A2-5 power : 15-11 [kW] speed : 6000 [Rpm] max. bar clearance Ø : 45 [mm] max. machining Ø : 330 [mm] max. Ø on workbench : 550 [mm] max. machining length : 530 [mm] axis C stopping : 360 000 positions - Counter spindle power : 7.5 - 5.5 [kW] speed : 6000 [Rpm] quick feed speed : 20 [m/min] max. bar clearance Ø : 45 [mm] stroke : 580 [mm] axis C stopping : 360 000 positions - Number of turrets : 1 - Upper turret number of positions : 12 strokes X x Y x Z : 250 x +/-48 x 580 [mm] quick feed speed X x Y x Z : 20 x 7.5 x 24 [m/min] rotary tools speed : 5000 [Rpm] rotary tools power : 3.7 [kW] - installed power : 37 [kW] - dimensions : 3450 x 1700 x 2000 [mm] - weight : 5500 [kg] Wyposażenie - CN FANUC 18iTB - 2 x  ...