Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0778 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchable Mains connection 380 volts, 50 Hz - stepless feed in the X- and Z-axis - spindle speed over 2 motor speeds and 8 gear stages - quill displacement on the vertical milling head 60 mm - vertical milling head swivel and 100 mm horizontally extendable - fixed angle table 600 x 210 mm - coolant device in the machine base - adjacent control cabinet - original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable Mains connection 380 volts, 50 Hz - Infinitely variable feed in the X- and Z-axis - Spindle speed over 2 motor speeds and 8 gear stages - Quoil displacement on the vertical milling head 60 mm - Vertical milling head swivels and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition; used
x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 m The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was cre ...
x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was created wi ...
Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION !!
Machine Details Stock-No. 1105-03873 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 1985 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex Warehouse Technical details X-Travel 300 mm Y-Travel 150 mm Z-Travel 340 mm tool taper SK 40 spindle turning speed range 40 - 2000 rpm Feeds 10 - 500 mm/min table-size 600 x 210 mm engine output 1,5 / 1,8 kW Weight of the machine approx. 700 kg dimensions of the machine approx. 1.6 x 1.2x 1.6 m Additional information NICE MACHINE WITH UNIVERSAL TABLE
x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm Control: total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps spindle speed horizontal 60-1200 rpm. 12 steps Motor power 0.8 and 1.1 kW pole switchable Mains connection 380 volts, 50 Hz - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm- Vertical milling head +/- 90 pivotable - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm. 12 stages Motor power 1.0 and 1.5 kW pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinole shift on the vertical milling head 60 mm- swivel, rotate and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 51265/08 Year of construction approx. 1967 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.6 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Spindle speed over 2 motor speeds and 8 gear stages - Pinole shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 stages Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz feed in the X and Y axes - Pinol shift on the vertical milling head - fixed angle table - Coolant device with mechanical pump in the machine foot - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg good condition Machine new Painted in original grey tone; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 52185/08 Year of construction 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.4 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Two motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table coolant device in the machine foot - adjacent control cabinet - counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm Weight approx. 1000 kg very good condition; used
Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!
x-travel: 290/300 mm y-travel: 160 mm z-travel: 330/340 mm engine output: 1,5/1,9 kW weight of the machine ca.: 0,7 t Optical condition: very good: Mechanic: very good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 Aktiv vertical milling head Sk 40: Sk 40 S 20x2 operating instruction: operating key: ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green Compliance with the Machinery Directive on request at extra cost !! (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical ac ...
Universal tool milling machine make DECKEL type FP 1Mash. -No: 54203/08Technical specifications:Longitudinal movement of the table X 250/245 mmTransverse movement of the headstock Y 150 mmVertical movement of the table Z 340/335 mmSpindle mount ISA 40Speeds 40 - 2000 rpmvertical table slide 550 x 195 mmQuill stroke of the vertical milling head 60 mm12 feeds longitudinal and vertical 9.5 x 475 mm / minDrive power 1.2 kWDimensions 700 x 1000 x 1600 mmWeight approx 560 kgWith- Digital display- separate control cabinet- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Universal tool milling machine make DECKEL type FP 1Mash. -No: 54833/08Longitudinal movement of the table X: 250/245 mmTransverse movement of the headstock Y: 150 mmVertical movement of the table Z: 340/335 mmSpindle mount: MK 412 Hor.-speeds: 60 - 1200 U / min12 Vert.-speeds: 95 x 1900 rpmvertical table slide: 550 x 195 mmQuill stroke of the vertical milling head: 60 mm12 feeds longitudinal and vertical: 9.5 x 475 mm / minDrive power: 1.2 kWDimensions: 700 x 1000 x 1600 mmWeight approx: 560 kgWith- rigid angle table- several tool holders- original vice- separate electrical cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
x-travel: 300 mm y-travel: 450 mm z-travel: 150 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 660 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 300x160x340mm Speed:40-2000 rpm Recording: SK 40 Technical data Table 600x210mm Longitudinal path (X,Y,Z axis) 300x160x340mm Tool holder: SK 40 Vertical spindle speeds: 40-2000rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 1.8KW Machine weight approx. 700kg Dimensions 1000x1600x1000mm
No. 3287: 1 gebr. Universal toolmilling machine Fabr. DECKEL, type FP 1, Bauj. 1988 with active digital display Arb.-Ber.: 300 x 160 x 340 mm, drive power: 1.5 kW Accessories: rigid angular table Table size 210 x 600 mm Universal table Counterholder Other: Speed range 2000 rpm Tool holder SK-40
No. 3934: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 1, with active digital display ARB.-ber.: 300 x 160 x 340 mm, power: 1,5 kW Accessories: universal table hydraulic machine vise Tool Cabinet Other: Toolholder SK 40 RPM 2000 RPM
Description The machine was without Accessories: Spannznangen, div. end mill holders. Technical data: x away the 300 mm y away 150 mm z away 340 mm Table 210 x 600 mm Spindle speeds 40-2000 RPM. Feed 10 500 rpm. Recording ISO 40