used deckel fp3

Full cab cover FP2NC and FP2A Gene his all overhauled newly painted new Macrolonscheiben complete all parts available incl. hose and grid

Newly painted Size (LxWxH): 100cm x 70cm x 23cm

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm control: Grundig Contour tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good condition and can be inspected under power by appointment. Specifications: X: 500 mm Y: 300 mm Z: 380 mm Milling spindle by hand: 100 mm 18 spindle speeds: 40 - 2000 rpm 18 feeds X, Y, Z: 10 - 500 mm/min Rapid response: 1500 mm/min Clamping surface angle table horizontal: 700 x 320 mm Motor: 3 kW, 1420 rpm Dimensions approx.: 1500 x 1500 x 1800 mm Weight: approx. 1.5 t

Rotary encoder, tachometer, encoder -Spare part comes: from a machining center cover type FP3A -Number: 1x speedometer available -Price: per piece -Dimensions: 83/122/H95 mm -Weight: 1.1 kg

Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Chip collecting tray, cabin, housing, machine housing - Origin: from a machining center Deckel type FP3A -Machine housing material: aluminum profile and plexiglass -Transport dimensions: 975/850 / H940 mm -Weight: 66 kg

Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible.

X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, feed rate: 2-3600/min, rapid traverse: 4000mm/min, including documentation, without spare parts, gear for speed under 500/min is defective and the milling spindle is losing oil.

Control: Deckel Dialog 11, with vice, an inspection is possible.

Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced.

Article number: 27-06-063 Manufacturer: Chip Anne, Lid Mint condition Custom-fit seat and paint finish in RAL according to customer requirements Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 1000x1000x200mm Weight: approx. 4kg suitable: FP2 & FP3 FP2 Active Digital FP3 Active Digital FP2 Infinitely variable FP3 Infinitely variable

Nice machine, however, parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, E-parts, control panel, ... or to convert to a new control system !

x-travel: 300 mm Y-travel: 220 mm z-travel: 400 mm Clamping surface: 620 x 390 mm Speed: 31 - 3150 rpm Feed range: 1 - 3600 mm/min Rapid traverse: 4000 m/min Spindle mount: SK 40 Swivel head +/-: 90° Quill stroke: 60 mm Total power requirement: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Approx. space: 1.3 x 1.1 x 1.6 cm The machine comes from a training course and has been put into storage. It is possible that the z-axis is defective.

Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device *New*  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  3-axis digital display SINO *New*  Machine feet ...

Article number: 07-07-090 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device *New*  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  3-axis digital display SINO *New*  Tilting swiv ...

Article number: 07-07-085 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device *New*  Complete documentation  Various tension wrenches  Safety handwheels  Horizontal spindle cover cap  3-axis digital display SINO *New*  Machine feet  Tilting swivel table  electricall ...

Description: Travel distances: , X-axis: 400 mm , Y-axis: 400 mm , Z-axis: 400 mm , , Table dimensions: 700 x 460 mm , Tool changer positions: 20 , Max. workpiece weight: 350 kg , Tool holder: SK40 Speed 21 steps , Horizontal: 40 - 4000 rpm , Vertical: 40 - 4000 rpm , Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,400 mm, weight approx.: 2,500 kg

An unused Spiral fraes with all the zubehoer packed in a wooden box. Suitable probably for lid FP1 bsi lid FP3. Complete access system such as wheel box and alternating wheel, both for the raeder box, as well as for the sub-apparatus are included in the scope of delivery. The device can be used to fraesen spirals or as a sub-apparatus. The facility has probably never been used before and is therefore in a new state. Special price

Deckel FP3 A Milling Machine Dialog 11 Year of construction 1990, Dialog 11 control, working range 400 x 400 x 450 mm, quill stroke 80 mm, spindle speeds 4000 min, tool holder SK 40, feed rate 2 - 6000 mm/min, working range 400 x 405 x 400 mm, angle table, weight approx. 2000 kg, dimensions without control panel 1700 x 2100 x 2000 mm. Accessories: Universal tilt and swivel table Electronic handwheel, Coolant equipment Manuals Very good technical condition. Unfortunately, the machine was poorly painted over. A viewing under power is possible by appointment. If you have any questions, please feel free to contact us by phone at any time! You can find information on this under Legal information of the seller. Thank you very much.

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Shock head for cover FP1 and FP2 General overhaul new store and painted. Shock length 80 mm

; very good

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price