used FANUC for sale

Control: Fanuc Power Supply Modul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc Servo Amplifier Modul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc Servo Amplifier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc AID32F1 Input Modul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc new/unused Input Unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc CNC control FANUC O-TC with: - display unit - keyboard - Control modules (A02B-0098) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc AOD32D1 Output Modul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: - mm table width: - mm ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mm turning length: 140x130 mm control: turning diameter over slide: 140 mm travel -x axis: 107 mm travel -z axis: 230 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: max 22 kW volt: V ampere: A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: max 22 kW volt: V ampere: A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 508 mm x-axis: 176 mm z-axis: 520 mm control: Fanuc-Series O-TD total power requirement: kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2,73x1,98x1,64 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm

Workpiece weight: 0 kg Number controlled axis: 0   Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 1   MACH-id     5482 MAKE         FANUC + ROFIN TYPE          S- 420 iF & SM 2000

Robodrill MC 010 X-axis: 500 mm Y-axis: 380 mm Z-axis: 300 mm Admission in spindle (ISO): BT30 Control : Fanuc 16-M Toolchanger: yes Number of toolholders: 10 positions Number of rotations: 10 > 8000 rpm

Fanuc Laser-model C3000 Type A04B-0811-B311 44 kVa - 130 amp Type A04B-0811-B511

Number of axes: 6, reach: 700mm, load: 3kg, with controls.

Number of axes: 6, reach: 3100mm, max. load capacity: 125kg, controls: FANUC SYSTEM R-30iB Plus, weight: 1.115t, operating hours counter: ca. 100h, with control system, an inspection is possible.

A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. workpiece weight: 2kg. Transport dimensions X/Y/Z: 775mm/1600mm/730mm, working position X/Y/Z: 775mm/1900mm/960mm.

This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document).

This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.

This Fanuc Robodrill a-T21iEL Vertical Machining center was manufactured in the year 2006 in Japan. It is equipped with a Fanuc Series 31i-A5 control unit. The machine has a spindle speed of 12000 rpm.

This FANUC ARC Mate 100i Robot machine was manufactured in 2000 in Netherlands. It has 6 axes and a payload capacity of 6 kg (13 lbs). It offers a reach of 1368 mm (54 in) with a repeatability of ±0.1 mm (.0039 in). It operates at the following motion speeds: J1-J3 at 120 °/s (2.09 rad/s), J4-J5 at 360 °/s (6.28 rad/s), and J6 at 450 °/s (7.85 rad/s). Its motion range includes J1 at -330°, J2 at -210°, J3 at -299°, J4 at -380°, J5 at -280°, and J6 at -640°. Contact us anytime for further information.

This FANUC Robocut ALPHA-0B Erosion machine was manufactured in the year 1995. It is equipped with a Fanuc Series 16-W control unit and has 4 axis. The machine has a wire tension: 0-2500 g.

This FANUC Robocut Alpha-1iA erosion machine was manufactured in 1999. It is equipped with a FANUC Series 18i-W control unit, ensuring precise and efficient operations. The machine offers movements of 520 mm in the X-axis, 370 mm in the Y-axis, and 310 mm in the Z-axis, with additional U and V-axis movements of 120 mm each. It supports a table load of up to 1000 kg, making it suitable for handling substantial workpieces. The FANUC Robocut Alpha-1iA machine we have for sale is an excellent choice for intricate EDM tasks. Contact us for more information.

FANUC ALPHA C600iA - 2014 Wire cutting EDM machine

Fanuc Robodrill Alpha-T14ifb Tapping Machine 10000 rpm 5 inches diving head(Nikken) Machine is in good working condition

Fanuc Robodrill D14LiB Plus Vertical Machining Center Machine is like new condition Table size : 850 mm x 410 mm X : 700 mm Y : 400 mm Z : 330 mm 10 pieces of tool holder, and some other tools will be given together with machine

CNC control in the control panel / machine operator terminal CNC web control FANUC type A14B - 0048 - 0002 Year of construction: 1990- Machine control panel - electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg From stock, function not tested, ideal as spare parts carrier.; used

6-axis AC servo drive, servo controller, servo inverter, servo amplifier, servo controller, frequency converter, drive controller for robots FANUC type A06B-6105-H0003 No. V07Z08282 Input voltage: 200 - 240 VAC Rated power: 1.5 kW Number of axle outputs: 6 Output current: 6 x 13 A Total output current: max. 78 A Manual No.: B-81465 Standard: EN50178 Built-in PCBs: A16B-2000-0063/07D A16B-3200-0440/05C - Plexiglas cover not included Dimensions W x H x D 70 x 170 x 380 mm Weight 16.5 kg As good as new / unused in the opened original carton from stock dissolution; used

Used Robot Palletizer Fanuc 2003 The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations Look no further than the 2003 Fanuc Robot Palletizer model M 410 iB 160 Equipped with a pick up head for cardboard and available base this palletizer is designed specifically for palletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can develop pallets up to a height of almost 3 meters The integrated base and controller in the pedestal or the available non pedestal version saves floor space an ...

Used Robot Depalletizer Fanuc 2003 The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations Look no further than the 2003 Fanuc Robot Depalletizer model M 410 iB 160 Equipped with a pick up head for cardboard and an available base this depalletizer is designed specifically for depalletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can depalletize products up to a height of almost 2 7 meters The integrated base and controller in the pedestal or the available non pedestal versio ...

Submerged Wire FANUC ROBOCUT Alpha 1-ib with auto wire thread, Information about technical data are not binding., Machine available subject to prior sale., X-y-z axes travel: 550x370x310 mm, U-v axes travel: 120x120 mm, Taper angle: ± 30°, Automatic wire threading and rethreading: yes, Maximum workpiece dimension: 1000x800x300 mm, Cnc: FANUC 180is - WB, Filter type: Cartridge, Weight: 3.000 Kg, Accessories: Chiller unit

For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing

Fanuc Robodrill a-T14 iB Vertical Machining Center Machine is in excellent condition

Fanuc W3 wire EDM machine Journeys: X-750, Y-450, Z-300, U-50, V-50 Max cutting angle: 10 degrees Max workpiece weight: 800 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detail - 700 x 950 x 300

X axis: 550 mm Y axis: 370 mm U axis: 120 mm V axis: 120 mm Z axis: 310 mm Fast forward (X, Y, Z / U, V): 900 mm / min / 450 mm / min Max work piece weight: 1000 kgs Power: 13 KVA Year 2002 Equipped with: Control: FANUC 180 iS-W Refrigerator: Yes

good condition inspection possible video available

Fanuc Robocut alpha-C600ib EDM Wire Cutting Machine Machine is in very good condition Maximum workpiece dimensions [mm]: 1050 × 820 × 300 Maximum workpiece weight [kg] : 1000

FANUC Robodrill Alpha T14iB vertical machining center from the year 2000 currently working. It is equipped with a Fanuc 16i-M CNC control unit. The machine has a spindle speed of 15000 rpm. Machine weight: 2100 kg CNC

Manufacturer: Fanuc Year of manufacture/SO/GO: 2000/-/- The machine is in good technical condition.

Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.

GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electrics, instruction manual.

GD-12 - electric scheme - user manual - programming with error codes - technical instruction with drawings GLD-12 - electric scheme - technical instruction BAR FEEDER IEMCA SHOP - electric scheme - operating instructions (setting, parameters, errors) BAR FEEDER FMB SHOP - electric scheme - operating instructions (setting, parameters, errors) Additionally - an original cable for connecting a computer to the GD-12 and GLD12 via RS-232, if there is no RS-232 on your computer, you need a USB-RS-232 adapter. PC and machine communication software and all machine parameters. As well as: - user manual; - programming instructions; - electric scheme; - drawings of mechanics. this is the original documentation. a couple more unnecessary books and CNC documentation (this can be downloaded on the Internet in Russian) There are 3 main shops for shops - mechanics, electric ...

Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 min⁻¹ Positioning accuracy in one direction (1): 0,006 / 300 mm Positioning repeatability (2): +/- 0,002 mm ...