used HURTH for sale

Wedge groove machine HURTH LF32a - see pictures

Wheel diameter - max. 300 mm Spindle speeds 250 - 2800 rpm Feed min/max 45/125 mm Module 8 Taper spindle ISO 40 Partial head angle 110º Total power requirement 3 kW Machine weight approx. 1.5 t Space requirement approx. 1.5 x 1.4 x 1.9 m

GEAR NOISE TESTER Make : HURTH Model : ZP320 B THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS

Description: serial number: 44742 control: SIEMENS Sinumerik  , max. wheel diameter: 150 mm min. module: 1.25 max. module: 3.5 tooth width: 45 mm bore diameter: 100 mm clamping surface: 1300 x 300 mm  , including: IFE IFS 2000 Suction Filter, YOM: 1998, power: 0.75 kW conveyor/transportation system  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik, max. module: 3.5 mm, Approx. Onsite Dimension. (l x w x h): 2,800 x 2,500 x 2,800 mm, weight approx.: 7,000 kg

Description: serial number: 45641 control: SIEMENS Sinumerik  , clamping surface area: 1475 x 300 mm number of T-slots: 2 T-slot width: 18 mm T-slot distance: 180 mm guide rail width: 59 mm max. outside diameter: 300 mm drilling diameter: ,63.5 - 100 mm connected load: 16 kVA  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik, Approx. Onsite Dimension. (l x w x h): 3,500 x 3,000 x 2,200 mm, weight approx.: 5,500 kg

groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping.  ...

max. wheel diameter: 0 mm max. number of teeth: 0 max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC controlled milling machine for synchronous rings The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...

max. wheel diameter: 280 mm max. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 49 STK weight: 10 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 5 t working width: max. 300 mm : 6 extensive accessories: viele Wechselräder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 19147 weight of the machine ca.: 4 t working width: max. 300 mm extensive accessories: viele Wechselräder max. module: 7 Module The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 400 mm : 18010 shaving cutter - diameter: 64 - 320 mm indexing: schleifbar 1 -12 Modul shaving wheel width: max. 40 mm number of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mm slide speeds: 5-20-30-40 Zähne/min. max. dia. of grinding wheel: 762 mm grinding wheel - swivable: 5-21 ° grinding slide swivable +/-: 2 x 35 ° total power requirement: 3 kW weight of the machine ca.: 4,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m

Chip centrifuge, Speed ​​variator for the shaver, 2 points 1 hydraulic for small Ø and another manual for Ø up to 550mm / Centrifuge chips, Variable speed for shaver, 2 points for small or 1 Hydraulic and a manual for Ø up to 550mm, High: 2200 mm, Long: 1650 mm, Width: 1450 mm, Module: 8, Weight: 6,500 Kg., Voltage: 220/380 W., Total power: 6.5 Kw., Cutter ø max / min: 260/180 mm, Cutter length max / min: 30/20 mm, Maximum length workpiece: 250 mm, Ø max. / min. workpiece: 550/20 mm., Specification: Universal