Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 400 mm Square: 400 x 400 mm Execution: Horizontal hydraulic Cut length: min.: 6 mm max: 750 mm Max. automatic forward feed length: 750 mm Cutting speed: stepless from: 20 m/min up to: 110 m/min Band length: 5090 mm Band width: 34 mm Sheet thickness: 1.1 mm Vice pressure max.: 20 - 60 bar Voltage 50 Hz 3x: 400 Volt Power: 8 kW Machine´s weight about: 2150 kg Overall dimensions machine: Length: 2420 mm Width: 2240 mm Height: 1915 mm Various accessories: Automatic forward feed Coolant system: 100 l Chip conveyor
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Operating hours: 54112 Technical data Cut range: round up to: 10 - 260 mm Square: 260 x 260 mm vertical hydraulic Automatic Cut length: min.: 5 mm max: 680 mm Max. automatic forward feed length: 680 mm stepless from: 15 m/min up to: 125 m/min Band length: 4115 mm Band width: 41 mm Sheet thickness: 1.3 mm Voltage 50 Hz 3x: 380 Volt Power: 4 / 6.5 kW Machine´s weight about: 1915 kg Overall dimensions machine: Length: 2125 mm Width: 1930 mm Height: 2100 mm Various accessories: Automatic forward feed Material bearing lenght: 1 m Roller conveyor Coolant system Chip conveyor
Height under guides: 1 mm Throat: 1 mm Table length: 7675 mm Table width: 54 mm Capacity 90°: 530 x 630° Cutting speed Vario:12 - 120 Circle blade size: 7675 x 54 x 1,3mm Power: 17kW Chip conveyor: Yes Length: 3400mm Width: 1900mm Height: 2100mm Weight: 3800kg
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Sawing speed 11 – 14 – 18 – 20 – 22 – 36 M/Min Length:2.200 mm Width:900 mm Height:1.400 mm Weight:1.200 kg
Capacity round maximum diameter: 400 mm Angle degrees maximum: 80 Capacity square: 400 mm Workpiece height: 400 mm Workpiece width: 400 mm Capacity rectangle: 400 mm Band saw KASTO - Twin A4.6 MACH-ID 8712 Make: KASTO Type: Twin A4.6 Year: 2015 Cutting Hours ca 1200 TOUCH Screen panel Capacity 90°: 400° Cutting flat 90°: 400 x 400mm Feed single stroke: 500mm Feed multiple stroke:9999mm Circle blade size: 5700 x 41 x 1,3mm Power: 4kW Chip conveyor: Yes Length: 2700mm Width: 2300mm Height: 2000mm Weight: 3200kg
Capacity round maximum diameter: 400 mm Angle degrees maximum: 90 Capacity square: 400 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id 5161 MAKE KASTO Germany TYPE Twin A4 YOP 2001 SPECIFICATIONS Bandsaw / Circelblade / Automat Automat Angle L / R Degrees 90 Gr. Cutting capacity 90 ˚ Ø 400 mm Cuttting capacity 90 ˚ Flatt 400 x 400 mm blade dimensions 5090 x 41 x 1,3 mm roller conveyor / push up / measuring Roller conveyor Cutting speed M/min 20 - 110 M/min DIMENSIONS Length 2500 mm ...
Capacity round maximum diameter: 830 mm Angle degrees maximum: 90 Capacity square: 9195 mm Workpiece height: 830 mm Workpiece width: 830 mm Capacity rectangle: 830 mm Cutting 90°: 730 Cutting flat 90°: 730 x 830mm Feed single stroke: 750mm Feed multiple stroke:9999mm Min. cutting length:8mm Cutting speed Vario:12 - 120 Circle blade size: 9195 x 67 x 1,6mm Power: 20kW Chip conveyor: Yes Length: 2640mm Width: 5040mm Height: 2865mm Weight: 11500kg
Capacity round maximum diameter: 530 mm Angle degrees maximum: 90 Capacity square: 7675 mm Workpiece height: 530 mm Workpiece width: 530 mm Capacity rectangle: 530 mm Cutting 90°: 530 Cutting flat 90°: 530 x 630mm Feed single stroke: 600mm Feed multiple stroke:1500mm Min. cutting length:6mm Cutting speed Vario:12 - 120 Circle blade size: 7675 x 54 x 1,3mm Power: 9,5kW Chip conveyor: Yes Length: 2225mm Width: 5215mm Height: 2680mm Weight: 5250kg
Capacity round maximum diameter: 400 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id 3509 MAKE Kasto Germany TYPE Twin A4 YEAR 2006 SPECIFICATIONS Bandsaw / Circelblade / Automat Bandsaw Angle L / R Degrees 0 Gr / Straight cutting Cutting capacity 90 ˚ Ø 400 mm Cuttting capacity 90 ˚ Flatt 400 x 400 mm blade dimensions5700 x 41 x 1.3 mm Cutting speed M/min 20 - 110 M/min DIMENSIONS Length 2980 mm Width 2700 mm Height 2200 mm
Capacity round maximum diameter: 400 mm Angle degrees maximum: 90 Capacity square: 400 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id 5002 MAKE Kasto Germany TYPE Twin A4 YOP 2003 SPECIFICATIONS Bandsaw / Circelblade / Automat Automat Angle L / R Degrees 90 Gr Cutting capacity 90 ˚ Ø 400 mm Cuttting capacity 90 ˚ Flatt 400 x 400 mm blade dimensions 5700 x 41 x 1,3 mm Cutting speed M/min 20 - 110 M/min DIMENSIONS Length 3000 mm Width 2700 mm Height 22 ...
cap round: 520 mm cap square: 520 x 520 mm cap rectangle: 620 x 520 mm Depth of throat: 620 mm Max height of workpiece: 520 mm Table travel : Manual (1) -- hydraulic (2): manual Length of band saw: 6096 mm Power needed: 15 kW Length : 3300 mm Depth : 2200 mm Height: 2350 mm Weight: 4 ton
full automatic with chipconveyor cap round: 100 gt; 520 mm cap square: 100 x 100 / 520 x 520 mm cap rectangle: 100 x 10 / 620 x 520 mm Depth of throat: 550 mm Max height of workpiece: 550 mm Table travel : Manual (1) -- hydraulic (2): hydraulic (500 mm) Sawspeed: 17 > 125 m/min Length of band saw: 7239 x 54 x 1,3 mm Power needed: 10,5 kW Length : 3450 mm Depth : 2300 mm Height: 3450 mm Weight: 4500 kg
chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 12 meter in-feed rollerconveyor - max workpiece width: 800 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor Depth of throat: 1060 mm Max height of workpiece: 860 mm Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)
full automatic with chipconveyor cap round: 420 mm cap square: 420 x 420 mm cap rectangle: 420 x 420 mm Depth of throat: 420 mm Max height of workpiece: 420 mm Table travel : Manual (1) -- hydraulic (2): hydraulic (600 mm) Sawspeed: 17 > 120 m/min Length of band saw: 6300 x 41 x 1,3 mm Power needed: 8 kW Length : 2450 mm Depth : 3050 mm Height: 2230 mm Weight: 3400 kg
Cutting dimensions: 500x320mm, connected load: 2.2kW, length: 3550mm, width: 2000mm, height: 2110mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible.
The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible.
There are three metal band saws available, connected load: 1.1kW, weight: 170kg.
Connected load: 0.9kW, weight: 170kg, including instruction manual, three saw blades for V2A and five saw blades for steel, the lowering hydraulics should be overhauled.
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm ELECTRICAL SPECIFICATIONS total power consumption: 17 kW DIMENSIONS / WEIGHTS total weight approx.: 2540 kg
- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition
Two cutting speeds - Vice with counter-clamping device - Infinitely variable mitre adjustment (-45° to +60°) - Coolant device - Material support roller - Pin chip remover and chip drawer
for sale kasto pbs 800 hacksaw overhauled by the parent company, low voltage controls, works very well.
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-360 AU Year of production 1995 Automatic operation type Tape cutting tool 5334x38x1.3 mm Max. dimensions of the cut material 360 x 360 mm Max. diameter of cut material 360 mm Angle cutting missing Arm feed speed 20 - 130 m/min Hydraulic vice pressing Engine power 7.5 kW Producer: KASTO Max. ...
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-420 Cutting area approximately 420 mm Square cutting surface 420x420 mm Material feeding with automatic 600 mm Multi-material feeding 9999 mm Cutting speed continuously 20-130 m/min Total drive power 8 kW The driving power of the saw engine is 5.5 kW Stepless regulation of pressure reduction ...
cutting diameter:520 mm saw band length:7239 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min cutting width at rectangle material:520 mm total power requirement:9,5 kW weight of the machine ca.:3,8 t Machine with multi feed device chip conveyor infeed roller stand
cutting diameter:260 mm band length:450 x 4 x2 mm total power requirement:22,6 kW weight of the machine ca.:1024 kg dimensions of the machine ca.:1500 x 2310 x 955 mm square:240 x 240 mm flat material:260 x 180 clamping capacity:40 bar Documents:vorhanden
cutting diameter:520 mm saw band length:7239 x 50 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min total power requirement:9,5 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3,5 x 2,2 x 2,1 m - Multifeed device - infeed roller stand - chip conveyor - automatic operation
weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972
Description: Machine number: ,1132 107 067 Total drive power: 1.5 kW total power requirement: 1,5 kW, weight approx.: 215 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,400 mm
Description: . weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 1,300 mm
Description: Power 3.5 kW, max. clamping depth 300 mm, including roller conveyor, roller length 390 mm, roller width 50 mm, roller conveyor length 3000 mm weight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 1,600 mm
Description: - Cutting diameter : 360 mm - Speed variation of rotation of the blade : from 20 to 130 m/min Equipped with : - Clamping in pack - Automatic feeding - 1 Chips conveyor - Counting and deducting of parts Stock N° : 7264 weight approx.: 2,600 kg, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,200 x 1,900 mm
Description: Machine number: 6715 101 002 Operating voltage: 400 V Frequency: 50 Hz Connection: 8.0 kW Rated current: 20 A Control system: KASTO ADVANCED CONTROL Cutting range round material: 560 mm Smallest sawable dimension: 10 x 10 mm Cutting range flat material: 560 x 560 mm Max. feed per stroke: 500 mm Minimum cut-off length: 10 mm Cutting speed: 12 - 150 m/min Specification of material diameter sawn during measurement: 360 mm Saw blade length: 7067 mm Saw blade height x width: 54 x 1.6 mm Saw blade tension set hydraulically at the factory Saw blade cleaning replaceable wire brush driven by the impeller Height of material support: 700 mm Incl. roller conveyor Length: approx. 3200 mm Width: approx. 740 mm Attention: the machine can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 5,000 x 3,200 x 2,200 mm, weight approx.: 4,000 kg
Description: Machine number: 6421 103 068 Operating voltage: 400 V Frequency: 50 Hz Connection: 2.5 kW Rated current: 16 A Control system: KASTO BASIC CONTROL Material support height: 950 mm Machine roller conveyor length: 1256 mm Max. material weight: 1000 kg Cutting range: Largest dimensions round diameter: 260 mm Square (H x W): 260 x 320 mm Smallest dimensions round: 10 mm diameter Square (H x W): 10 x 10 mm Shortest cut piece length: 5 mm Shortest remaining piece length: Single cut: 10 mm Automatic operation: 40 mm Saw blade dimensions: 3180 x 27 x 0.9 mm Set width: 1.5 mm Saw blade tension set hydraulically at the factory Saw blade cleaning: replaceable brush driven by the saw blade wheel Cutting speed: 12 - 120 m/min continuously adjustable Cutting feed speed infinitely adjustable Clamping pressure: Hydraulic machine clamping pressure: 30 - 58 bar Material feed: Single feed length ...
Description: Cutting diameter: 100mm Saw blade dimensions: 350x32x2.5mm Material support height: 900mm Cutting speed: 38/76m/min Cutting area at 60 degrees round: 90mm Cutting area at 60 degrees flat: 90x90mm Cutting area at 60 degrees square: 90x90mm Clamping range: max. 170mm semi-automatic miter cold circular saw 90 / -45 / +45 / + 60 degrees with pneumatic material clamping saw blade diameter: 350 mm, cutting range 90 degrees: round: 100 mm, cutting range 90 degrees: flat: 170x90 mm, cutting range 90 degrees: square: 90x90 mm, cutting range 45 degrees: round: 100 mm, cutting range at 45°: flat mat.: 125x90 mm, cutting range 45 degrees: square: 90x90 mm, total power requirement: 1,8/2,4 kW, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 2,200 mm
Description: - DESIGN: 90° AUTOMATIC SAW - DESIGN: 90° UP TO D= Ø 400 MM OR FLAT 400 X 400 MM - SAW DIMENSION: 5700 X 41 X 1. 3 MM - CUTTING SPEED: 20 - 110 M/MIN Incl. saw bands in box Approx. Onsite Dimension. (l x w x h): 2,700 x 3,000 x 2,200 mm, weight approx.: 2,420 kg
Description: Hydraulic hacksaw machine - Coolant device - 2 speeds Cutting diameter 180 mm Saw blade length 375 mm Cutting range at 90 degrees: around 180 mm Cutting area at 90 degrees: square 180 mm Total power requirement 1.5 kW Machine weight approx. 1.1 t Dimensions L x W x H 2.1 x 1.7 x 1.0 m weight approx.: 1,100 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,700 x 1,000 mm
Description: Hydraulic hacksaw with: - Coolant device Cutting diameter 170 mm Saw blade length 350 mm Cutting area at 90 degrees: square 160 mm Cutting area at 90 degrees: flat 170 x 220 mm Total power requirement 0.85 kW Machine weight approx. 180 kg Dimensions L x W x H 1.2 x 0.8 x 1.0 m weight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm
Electric motor, luminous flux motor -Power: 0.37 kW -Speed: 2850 rpm -Hollow shaft: Ø 16 mm -Construction: B5 -Protection class -Dimensions: 265/143/H143 mm -Weight: 9.4 kg
Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm -Weight: 64 kg
Hacksaw, hacksaw machine, hacksaw machine -Manufacturer: Kasto, Hydr. hacksaw machine -Max. Cutting height: approx. 310 mm -Max. Cutting width: approx. 340 mm -Saw blade: length approx. 615 mm -Roller conveyor length: 1500 mm -Dimensions machine: 2300/1800/H1300 mm -Weight: 1500kg
Aluminum cross-cut saw, aluminum circular saw, aluminum semi-automatic circular saw, cross-cut saw, aluminum metal circular saw, light metal circular saw, metal cutting machine -Manufacturer: KASTO, semi-automatic under-table miter saw machine with roller conveyor -Type: KASTOalu U 14 -Saw blade: Ø 400 mm, 2,800 rpm -Saw feed: Hydropneumatic, infinitely adjustable saw feed with rapid return -Swivel range: 180° infinitely adjustable miter device -Cutting area 90°: 200x80 mm / 125x125 mm / 140 mm -Cutting area 45°: 140x80 mm / 110x110 mm / 130 mm -Coolant device: minimum quantity lubrication system -Drive: 1.8 kW -Clamping device: Two vertical and two horizontal clamping elements -Roller conveyor: 3000/520/H950 mm / 2000/470/H950 mm -Dimension saw: 700/1100/H1370 mm -Total weight: 298 kg
Cold circular saw, metal circular saw, metal chop saw -Max. Saw blade: Ø 315 mm -with coolant device: -Saw blade speed: 33/66 rpm -Cutting area: 90° flat 135 x 80 mm -Cutting area: 45° flat 100 x 80 mm -swivel: -Dimensions: 450/800/H1700 mm -Weight: 278 kg
This KASTOWIN A4.6 sawing machine was manufactured in 2019. With a cutting range of 460 mm, its suitable for various material sizes, offering flexible operation. The machine has a hydraulic material clamping system and a saw motor with variable cutting speed ranging from 12 to 150 m/min. Its dimensions are 1650 mm in length, 2900 mm in width, and 2030 mm in height, with a weight of 3450 kg. Consider purchasing this KASTOWIN A4.6 for enhanced sawing capabilities. Contact us for further details regarding this sawing machine.
This KASTO cut DU 4 Sawing machine was manufactured in the year 2010 in Germany. The machine has a Cutting speed of 20 to 110 m/min.
This KASTO speed C 14 Sawing machine was manufactured in the year 2004 in Germany. It is equipped with a chip removal. Disposes of a signal lamp and a Hydraulic lift roller.
This KASTO sawing machine was manufactured in 2019. It features a robust 2200 kg weight, along with saw blade dimensions of 5,090 x 34 x 1.1 mm for precise cuts. The cutting range for round materials extends up to 330mm, with a maximum feed per stroke of 500mm and a cutting speed of 12 to 150 m/min. Cooling lubricant capacity is around 86l. Buy this KASTO WIN A3.3 sawing machine. Contact us for more information.