used SCHUETTE for sale

Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

Number of spindles 8 Controller Siemens 810D Chuck diameter: 130 mm Max part diameter: 135 mm Total stroke: 125 mm Working length: 100 mm

- 6 spindles - Max. bar clearance: 63.0 mm - Rod guide and stand including many accessories (see photos)

Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide

Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer

Thread cutting gear Pick-up device partially revised

Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves

Year of manufacturing: 1999 Travels: -X: 500 mm -Y: 320 mm -Z: 320 mm Center height: 320 mm Workpiece length between centers: 700 mm Table clamping area: 1210 x 116 mm Grinding spindle speed: 2250 / 3000 / 4000 / 6000 rpm Spindle motor: 2,4/3,0 kW Machine weight: 3000 kg Control: NUM 1000

Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle

max. grinding diameter: 150 mm grinding length: 293 mm workpiece length: 240 mm control: 840 D Siemens grinding spindle head:: turning speed range - grinding spindle: 1.800 - 9.000 U/min driving power - grinding spindle: 4,4 kW axis stroke:: x-axis: 300 mm y-axis: 170 mm z-axis: 230 mm C-Axis: 200 ° A-Axis: 50 min/-1 feeds:: feed speeds: X / Y / Z: 20.000 mm/min tool taper: HSK 50 total power requirement: - kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,2 x 2,3 x 2,5 m Documents: central lubrication: exhaust fan: grinding wheel pin: 4x 5-Axis Tool Grinding Machine SCHÜTTE - WU 205 #01 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 180 mm grinding length: 330 mm workpiece length: 240 mm control: Sinumerik 840 D Siemens grinding spindle head:: turning speed range - grinding spindle: 12.000 U/min driving power - grinding spindle: 8,5 kW axis stroke:: x-axis: 400 mm y-axis: 250 mm z-axis: 250 mm C-Axis: A-Axis: 0 - 2.500 U/min feeds:: feed speeds: X / Y / Z: 20.000 mm/min tool taper: HSK 50 total power requirement: - kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2,2 x 2,4 x 2,5 m Documents: central lubrication: exhaust fan: grinding wheel pin: 5x 5-Axis Tool Grinding Machine SCHÜTTE - WU 305 Trend - Ball screw in the linear axes X, Y, Z - directly driven in the rotation axes A, C - Central lubrication - 3-fold grinding wheel changer - Heidenhain probe, permanently mounted on the grinding spindle housing - 50-fold workpiece handling with gripping swivel unit - Prepar ...

max. grinding diameter: 150 mm grinding length: 293 mm workpiece length: 240 mm control: 840 D Siemens grinding spindle head:: turning speed range - grinding spindle: 1.800 - 9.000 U/min driving power - grinding spindle: 4,4 kW axis stroke:: x-axis: 300 mm y-axis: 170 mm z-axis: 230 mm C-Axis: 200 ° A-Axis: 50 min/-1 feeds:: feed speeds: X / Y / Z: 20.000 mm/min tool taper: HSK 50 total power requirement: - kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,2 x 2,3 x 2,5 m Documents: central lubrication: exhaust fan: grinding wheel pin: 4x 5-Axis Tool Grinding Machine SCHÜTTE - WU 205 #99 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 260 mm grinding length: 500 mm workpiece length: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Very well preserved universal tool grinding machine in particular suitable for all types of cutting tools. Workspace: Center height above table 115 mm Center width 720 mm Largest grinding diameter 260 mm Maximum grinding length 500 mm Largest clamping diameter 260 mm Maximum clamping length 500 mm Table: Clamping surface 1120 x 112 mm Largest longitudinal movement 520 mm Adjustability across 270 mm Adjustability vertically 300 mm Can be swiveled to 2 sides by 180° each Grinding spindle: The spindle head can be swiveled 360° Min./max. Distance from the center of the grinding spindle to the top edge of the table 70 / 370 mm Can be swiveled to a twist angle of 60°-0°-60° Can be swiveled to a clearance angle of 15°-0° ...

max. grinding diameter: 0 mm grinding length: 0 mm workpiece length: 970 mm total power requirement: 12 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

max. grinding diameter: 320 mm grinding length: 500 mm workpiece length: 700 mm total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Height of centres 220 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis, manual 200 ° Grinding head tilting, manual +/- 90 ° Speed range of R axis, approx. 0 - 50 rpm Grinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS  ...

number of spindles: 3500 U/min spindle passage: 26 mm turning length: 26-60 mm Control: CNC total power requirement: 15 kW weight of the machine ca.: 4,4 t dimensions of the machine ca.: 3750 x 1410 x 4400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 36 mm turning length: 125 mm swing diameter over bed slide: mm Control: total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 6500mm x 1400mm x 2100mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Number of spindles: 6 Capacity round bar: 13 mm Max. advance of bar: 63 (125) mm Max. stroke of long slide: 50/31.5 mm Machining rate: from: 0.24 sec up to: 75 sec Spindle speeds: number (steps): 47 from: 560 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 3400 kg Overall dimensions machine: Length: 3055 (5161) mm Width: 930 mm Height: 2500 mm Various accessories: Bar feeder Set of toolholders Chip conveyor

Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Coolant system Chip conveyor

Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Bar feeder: CUCCI Threading attachment: OERTLINGHAUS Coolant system Chip conveyor: KNOLL Toolholders

Technical data Number of spindles: 6 Capacity round bar: 42 mm Capacity square bar: 30 mm Capacity hexagon bar: 36 mm Max. stroke of long slide: 125 mm Machining rate: from: 0.9 sec up to: 280 sec Spindle speeds: number (steps): 49 from: 315 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 6500 mm Width: 1400 mm Height: 2100 mm Various accessories: Bar feeder Chip conveyor

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D / WINDOWS XP Operating hours: 32767 Technical data Number of axis total: 5 Linear Axes direct driven Rotary axes axes direct drives Direct measuring system X, Y and Z axis X axis: 400 mm Y axis: 250 mm Z axis: 250 mm grinding diameter: 1 - 10 mm Tool lenght Distance from table to A axis: HSK 50E Collet attachment: 15 W Spindle nose: HSK: 50 Grinding spindle speeds: stepless up to: 12000 rpm Grinding spindle motor: 8 kW Total power required: 20 kVA Machine´s weight about: 2800 kg Overall dimensions machine: Length: 1990 mm Width: 1640 mm Height: 1960 mm Various accessories: Grinding wheel changer 5-fold Automatic Workpiece guiding system Central lubrification fire extinctor

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 115 mm Distance between centres: 720 mm Max. grinding diameter: 260 mm Distance from table to grinding spindle: min.: 70 mm max: 370 mm Longitudinal way of table: 520 mm Transversal way of the table: 270 mm Vertical adjustment of grinding head: 300 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° Grinding spindle speeds: number (steps): 4 from: 1100 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.6 HP Machine´s weight about: 840 kg Overall dimensions machine: Length: 1800 mm Width: 1400 mm Height: 1700 mm Various accessories: Lamp Universal Vice swivelable

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 115 mm Distance between centres: 500 mm Max. grinding length: 320 mm Axial motion: Longitudinal: 340 mm Vertical: 300 mm Slewing range of grinding head: vertical: 360 ° Grinding spindle speeds: from: 3650 rpm up to: 6100 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 700 kg Overall dimensions machine: Length: 1000 mm Width: 905 mm Height: 1500 mm Various accessories: Set of grinding wheel arbors Tailstock Lamp

Technical data Number of spindles: 6 Capacity round bar: 26 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 40/33P Coolant system Thread rolling attachment: 1 x Longitudinal slide number: 2 Drilling unit with independent feed: 6 x Appareil à rouler les filêts à commande mécanique Tool break control Turret number of tools: 6 x Threading attachment: tangent.

Technical data Number of spindles: 6 Capacity round bar: 42 mm Capacity square bar: 30 mm Capacity hexagon bar: 36 mm Max. stroke of long slide: 125 mm Machining rate: from: 0.9 sec up to: 280 sec Spindle speeds: number (steps): 49 from: 140 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 6516 mm Width: 1588 mm Height: 2100 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 40/35 P (1999) Pick-up spindle Toolholders Boring tool holder Back operating device

Controls: Siemens S5, length: 7100mm, width: 2600mm, height: 2500mm, weight: 10.6t, with Bar Loader Iemca PRA 40/42/F, documentation, control cabinet, hydraulics, with bar guide and chip and coolant disposal was maintained regularly.

The machine is fully functional.

Country of origin: Germany, Number of spindles: 8, Auto bar loader: Cucchi BLT - bundle magazine

CNC Univ. Tool grinding machine SCHÜTTE type BU 400 CNC 4 Fabr. SKU: 03-02 Year of construction 1990 4-axis (X, Y, Z and R)Table clamping surface 1300 x 250 mm Center width 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kW Mains connection 380 Volt, 50 Hz, 25 Amp. - CNC control dismantled - Coolant device adjacent Space need L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control missing. good condition, ideal for control conversion; used

number of spindles:8 spindle passage:130 mm Cam controlled multi spindle automatic lathe, used 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo Irrtum und Zwischenverkauf vorbehalten Visiting under production condition possible Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:67 mm cam controlled multi spindle automatic lathe six main spindles D=67mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:81 mm cam controlled multi spindle automatic lathe six main spindles D=81mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:100 mm cam controlled multi spindle automatic lathe six main spindles D=100mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Article: cam-controlled multi-spindle automatic lathe with CNC-pickup Manufacturer: Schütte Type: SF51 Yob: 1988 six main spindles for bars up to D=51mm CNC-pickup in position 6 with rear CNC-machining; electronic cam control Balluff; independent feed position 4; chip conveyor: magnetic belt; oil/stee-running; additional coolant pump with double filter (magnetic cartridge filter). The machine tools shown and not listed are not part of the scope of delivery. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: S51 PC Yob: 2008 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm hirth-coupled spindle drum, Control: Software SICS 2000 / Windows 2000 / Beckhoff Twincat Position I: cross slide X-I; longitudinal slide Z-I Position II: compound slide cross XZ-II; longitudinal slide Z-II Position III: compound slide cross XZ-III; longitudinal slide Z-III Position IV: compound slide cross XZ-IV; compound slide longitudinal ZX-IV Position V: cross slide X-V; compound slide longitudinal ZX-V Position VI: cross slide X-VI; pick up for rear machining; second cross slide XX-VI Coolant tank with hinged belt chip conveyor; Coolant pump with two pressure connections: q= 180 l/min, p1 bar; q=70 l/min, p=7 bar; Workpiece collecting device with belt conveyor (low ...