Model
(Manufacturer: SCM)
SECOND-HAND WIDE BELT SANDER SCM MOD. SANDYA 7 M2 110 - CE RULES - working widht mm. 1100 mm. - roller - roller/pad (1st roller steel, second rubber) - year 2002
WIDE BELT SANDER SCM MOD. SANDYA 10 RCS 110 - CE RULES - Roller + combined pad "RCS" - working width 1100 mm - blowers - volt. 400/50 - s/n AE/019985 - year 2000
SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...
SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...
SECOND-HAND SPINDLE MOULDER SCM MOD. T150 - CE RULES - volt. 400/50 - matr. AB/142970 - year 2001
SECOND-HAND SPINDLE MOULDER WITH TILTING SHAFT SCM MOD. TI120 - CE RULES - tenonig carriage model TL - spindle shaft diam. 40 mm. - motor Hp 7,5 - year 2008
SECOND- HAND SPINDLE MOULDER SCM MOD. T130NPS - CE RULES - with inverter - sn AB/155496 - year 2003
SPECIFICATIONS: Work table size mm: 2600 x 400 Installed capacity: KW 5.0 Complete with hole punch, knives and regulator
SECOND-HAND COMBINED THICKNESSER - SURFACE PLANER SCM L'INVINCIBILE 500 MM.
SECOND-HAND WORKING CENTER SCM MOD. RECORD 1 - CE RULES - table mm. 2000X800 - year 1996
SCM sliding table saw model SI15WF: – 2500mm steel carriage (2700mm stroke) – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3200-4500-6000rpm – without engraver Machine not according to CE standards, for export
Remote Control Serial 20m 0102B worked off Delivery in exchange, exchange price! The return delivery of an economical remote control of the same type is mandatory!
Workpiece stop D=24 stroke 45, bolt steel, base body aluminium BAZ Morbidelli Author 503, 504 and similar worked off
Pressure cylinder for STC spindle Author 503 504 STC 0387676193H used, tested, functional
Milling spindle scm HSK63F 7,5KW "round" 18,000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!
Milling spindle scm HSK63F 6,6KW "round" 24.000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!
Milling spindle scm HSK63F 6,6KW "flange" 24.000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!
Milling spindle scm HSK63F 8,5KW E1-NL 24.000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Warranty 6 months Delivery in exchange, exchange price!
Milling spindle scm HSK63F Prism KT-2 11/9 20 63F The spare part is completely overhauled. New bearing ceramic, balanced, sensor adjusted, etc. Warranty 6 months Delivery in exchange, exchange price!
E- Spindle scm ISO30 RTN INVER STC with Vector 7,5KW The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, etc. taken from a Morbidelli Author 504 STC Warranty 6 months
E- Spindle scm ISO30 RTN INVER STC without Vector 7,5KW The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, etc. taken from a Morbidelli Author 503 STC Warranty 6 months
Milling spindle scm HSK63F Prism 11kW "E-SPINDLE HSK63F 11KW X5+R110AL PRISMA" The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, sensors adjusted, etc. Warranty 6 months Delivery in exchange, exchange price!
E-spindle scm ISO30 RTN INVER with Vector 7,5KW The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, etc. taken from a Morbidelli Author 510 Warranty 6 months
E-spindle scm ISO30 RTN LD 7,5KW with Zero Speed Sensor The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, SK30 ground, etc. Warranty 6 months Delivery in exchange, exchange price!
SCM horizontal panel saw model Z32 : – useful cutting length 3200mm – useful cutting depth 3080mm – useful cutting height 90mm – Blade carriage with variable speed from inverter – blade with variable speed from inverter – blade D=350mm, 10 hp motor – engraver D=150mm, 1.5 hp motor – motorized pusher, increased to the full cutting length – pusher speed 3 m/min (fast) and 0.2 m/min (slow) – ELAP CM400 electronic control – double pneumatic side puller – 3 front shelves, length 1500mm – dimensions 5 m (width) x 5.7 m (depth) Machine not according to CE standards, for export
SCM Selecta 12F edgebander Glue station for granules pressure zone Pre-cutting guillotine Precision cutting unit Milling unit with straight milling cutters Milling unit with profile milling cutters Flat cyclin Polishers CE Certificate 1620kg
SPECIFICATIONS: Compilation: Tenon cutting area 2 vertical tenon cutting units - h 620 mm electronically controlled vertical / horizontal. 1 sawing unit 1 pantograph unit with tool changer magazine 1 workpiece return automated Profiling area 1 Vertical roll forming unit - H 620 mm electronically controlled vertical / horizontal. 1 vertical roll forming unit - h 620 mm electronically controlled vertical / horizontal. 1 vertical roll forming unit - h 620 mm electronically controlled vertical / horizontal. 1 aggregate for fittings 1 glazing bead cutting saw 1 roll forming unit - h 620 mm left Complete with workpiece selection table Workpiece removal and return Tools Documentation
Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511
Four-sided planing and roll forming machine SCM COMPACT 23 max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle approx. 4 kW Motor power vertical spindles approx. 5.5 kW Motor power upper horizontal spindle approx. 5.5 kW Infeed table length 2000 mm Motorized height adjustment of the feed system Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION
heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION
SPECIFICATIONS: 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 320 mm fixed
SPECIFICATIONS: Workbench mm: 1000 x 1000 with 4-roller Europa drive with variator Installed capacity KW: 4.0 Diameter of spindle mm: 35 Tilting spindle shaft Max. vertical stroke mm: 210 Tilt: 0° - 45°
SCM P64 four-sided planer Working width 180mm Working height 100mm 4 spindles Spindle system: Bottom 4kw Right/Left 5.5kw Mountain 4kw Spindle diameter 35mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Entrance table with a length of 2300mm Machine dimensions: 3300x1200x1600mm
SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm
SCM si x 32A Circular sawing machines Both sides saw blade tilting to 46° Be Mule shoe 1200 x 650 mm Saw table cast 1000 x 685 mm Carriage 3200 x 360 mm Format sections 3200 mm RIP fence cutting width 1270 mm Max cutting height + 90 °: 136 mm Max cutting height + 46 ° /-46 °: 97/60 mm Before scoring unit Motor 400V 50 Hz 7kW Main sawblade speed: 4000 1/m Dust nozzle diameter: 120 mm and 80 mm And switch on the carriage 2-ashes controlled height/Pan Programmable, electronic display G & PIECES 5508780 Optional carriage 2600 mm G & PIECES 5508775
Sliding table saw SCM SI16 Carriage length 1500mm Cutting width on the right side 1000mm Maximum cutting height 110mm Saw min/max: 200/350mm 45° swivel saw Saw speed variable on the belt 3200/4500/6000rpm Scoring speed 9800rpm 4kw main motor Scoring Motor 0.75kw
SPECIFICATIONS: Max. machinable edge thickness mm: 1.5 - 10 Max. edge thickness mm: 55 Max. feed speed: 18 m/min CNC control Soundproof booth Chain feed drive Equipment: Sanding unit / Glue / Edge unit / Round unit / Edge scraper / Glue scraper / Brushes
SPECIFICATIONS: Execution: - Gluing machine - Cross-cut saw unit - Flush milling - Scraper unit - Brushing unit
SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5
SCM machining center model RECORD 130TV: - axis travel X=4330 - Y=1720 - Z=300mm - useful working range 3830 x 1245mm - piece passage 280mm - worktop with 6 TV bars - laser for positioning aid - supplied with 12 suction cups and 12 clamps for TV bars - 3 loading aids - rubbish drain mat - 100 mc/h vacuum pump - automatic lubrication - optimized and centralized suction - electronic control with PC-OFFICE, in Windows system and XILOG PLUS interface - dimensions installed with protections mt 8,4 x 5,9 Operator groups: - vertical spindle type POWER2000 liquid cooled, motor KW 11 with inverter, HSK63F connection, with 4th vector rotating axis, served by: Dual RAPID tool changer at 12 + 12 positions rear tool room with 12 + 12 positions - UNIVERSAL K horizontal milling unit with 2 outputs (tip + blade), adjustable 0-90° , KW 3 motor Machine according to CE standards No ...
Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: 1 fixed 2500x600mm 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations
Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations
Flush planer SCM model F410N : - 410x2610mm tops - shaft D.120mm with 4 knives - control panel on rear pine cone Machine according to CE standards.
Seehr good condition! Machine from small operation in FINLAND Chain approx. 80% More info on pictures
Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-
S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403
Sliding table saw SCM SI 400N Carriage length 3200 mm Cutting width on the right side 1320mm Scoring Cutter Main motor power: 5.5kw Scoring motor power 0.75kw Variable saw speeds: 3000/4000/5000 rpm Scoring speed 8500rpm Maximum blade size 400mm Cutting height max 120mm Scoring disc 120mm Manually adjustable angle of up to 45 Manually adjustable blade height Year 2005 CE Certified
Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm