used WEINIG for sale

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

WEINIG Unimat 500 – 5 spindles • Planing width max. 230 mm • Planing height max. 120 mm • Feed electronically frequency-controlled 5-30 m/min. • Feed motor 4 KW • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 11 KW • 3rd spindle on the left with electr. Axle adjustment FORWARD – BACK • 4th spindle top 7.5 KW with electr. Axis adjustment HIGH-LOW • 5th spindle bottom 5.5 KW • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatic, high-low controlled • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Driven rubber roller in the run-out table • Electronic digital displays on 1/100 mm • Manual lubricant pump • Central positions of the lubrication points • GR ...

Automatic planing profile milling machine WEINIG Profimat 26 Super - Carpentry Working width 20 - 260 mm Working height 8 - 160 mm 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plaster bottom 4 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Lubricant pump manual Mechanical Digital Displays Machine in CE version Year of construction 2000 Without editing tools Machine is WORKSHOP TESTED in GOOD - CONDITION from stock Lieboch

Milling spindle Weinig Specifications: • Dimensions (mm): 130 x 40 •used • Inspected and repaired by Weinig

Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 7.5kw Top 5.5kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min 4kw Feed Motor Cardan shaft driven drive Pneumatic material clamps divided into three sections Tables Groove Machines Entrance table with a length of 1980mm Memory system CE Certified

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...

Four-sided planer Weinig Hydromat 23C Planing width 20-230mm Planing height 8-160mm Number of heads 6 Head system Bottom 7.5kw Right 7.5kw Left 7.5kw Top 11kw Top 7,5kw Bottom 7.5kw Total power 54kw Pulling rollers in the working table 4 Pneumatic clamps 5 rows of gear pulling wheels 2 rows of rubber pulling wheels Feed speed adjustable on the inverter Soundproofing the cab in the machine CE Certificate Year 2000

Four-sided planer Weinig Profimat 23E Planing width 230mm Planing height 130mm Number of spindles 5 Spindle arrangement Bottom 4kw Right 7.5kw Left Top 7.5kw Bottom 4kw Spindle diameter 40mm Feed on cardan shafts Spindles with brakes Smooth feed regulation on the inverter 1-20m/min Pneumatic material pressure

Four-sided slicer Weinig Type: Unimat 23 Year of construction: 1992 Planing width 20 - 230 mm for tool flight circle D = 140 mm Planing height 6 - 140 mm for tool flight circle D = 125 mm 5 waves: 1. Bottom 5.5 kW 2. Right 5.5 kW 3. Left 7.5 kW 4. Top 7.5 kW 5. Bottom 5.5kw Spindle diameter 40 mm Feed speeds 6 – 29 m/min. Waxilite Pump Manual with distributor for suction hoses complete with planer heads machine has always been well maintained and is in good, ready-to-use condition.

Winkelanlage Weinig including tools Type: UC 10/6 Year of construction: 1994 Cross wood processing 7 x stroke (7 tools on top of each other at IV 68) Longitudinal machining 3 shafts: 2 pieces with 3 x stroke and 1 piece with 2 x stroke Screen control for individual programs such as individual and series production Swivel stop arm for inclined window processing Tool: IV 68 Leitz (Dufix) with extension kit for sash 78 mm / frame IV 68# IV 68 with rung profile (carnish arch on the glass fold) IV 78 Zuani (for weather legs and rain rail) with extension kit for IV 90 (Zuani) with extension set for wood-aluminium windows (Aluminum shell as glass holder outside of Zuani) Weight 4700 kg

Weinig Hydromat H22N four-side planer - German production -DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - Spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min Feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers One Upper Rubber Pulling Roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...

WEINIG Rondamat R 912 S/N 912-497, YOC 1995 – Ref.-No. 119130 – fully automatic tool grinding machine • Automatic resharpening of straight planer knives in the cutter head with conventional or hydro clamping • Automatic resharpening of milling cutters in the hydraulic planer head (in front of the chest) • Automatic divider for up to 36 cutting edges • Concentricity tolerance below 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Abrasive mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable number of knives from 2 – 36 • Programmable grinding circuits per tool 1-9 • Free-angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Gr ...

WEINIG Rondamat 912, S/N 912-497 – fully automatic tool grinding machine • Automatic re-sharpening of straight planing knives in the cutter head with conventional or hydro-clamping • Automatic resharpening of cutters in the hydroplaning head (in front of the chest) • Automatic dividing head for up to 36 cutting edges • concentricity tolerance of less than 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Grinding mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable knife count from 2 – 36 • Programmable grinding cycles per tool 1-9 • Clearance angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Grinding spindle speed n=4,600 r ...

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

SPECIFICATIONS Pilot plane on the entrance side: 2000 mm Grooved table Machinable width: max. 180 mm Machinable height: max. 150 mm Spindle diameter: 40 mm Shaft drive Drive shaft power: 4.0 Kw Soundproof booth Spindle Configuration: I Shaft: Bottom 4.0 kW II Shaft: Right 4.0 kW III Shaft: Left 5.5 kW IV Shaft: Right 5.5 kW V Shaft: Top 11.0 kW VI Shaft: Bottom 4.0 kW VII Shaft: Top 11.0 kW VIII Shaft: Universal 4.0 kW

4-sided planer Fabr. Vinous Type U 23 E blue class YOC 2001 with 6 spindle + horizontal sawing unit 1 Sp. U-5,5 Kw 2-3 Sp. R/L 7.5 Kw 4 Sp.R 5,5 kw 5 Sp. Ø 7,5 Kw 6 Sp. U 5,5 Kw 7 horizontal sawing unit 2.2 kw (glazing bead saw) with button pressure yes-no Working width 20-230 mm Working height 8-120 mm Spindle 40 mm Feed rate 5-24 m/min 4 Kw Dressing table 2.5 m manuele waxilite pump two driven rollers in machine table

7,000380mm, heavy duty wheels, Lenze drive with feed speed control

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

The machine contains the components from the large-scale series of the powerful WEINIG class Working width 20 – 260 mm / carpentry version Working height 8 – 160 mm 5 working spindles DM 40 mm Long inlet work table - 2000 mm 5 working spindles, bottom 5.5 kW, left + right 7.5 kW, top 7.5 kW, plaster bottom 11 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 – 24 m/min. ATS system: Up to 98 workpiece dimensions can be programmed and called up at the touch of a button Left and upper spindle drive auto. in position Machine in CE design Built in 1998 Without editing tools

SPECIFICATIONS Pre-planer mm: 2000 Number of spindles: 5 Spindle configuration: I below - week 5,5 II - III right- left - KW 7,5 IV above - week 5,5 V below - week 4,0 Cardan shaft Speed-controlled drive KW: 4.0 Spindle diameter mm: 40 Revolutions per minute: 6,000 Max. working width mm: 230 Max. machining height mm: 120 Complete with: - Soundproof cabin - Grooved table -Tools CE-compliant

SPECIFICATIONS: Machining max mm: 330 Spindle diameter mm: min 100, max 300 Voltage: 220 V Tool measuring and display system for optical measurement of tools

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

Order No. 6762 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 130mm - 4 spindles: 1) horizontal bottom 220mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 7.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from the top 4 introducing, drawing, toothed rollers - from above, 1 pulling roller, rubber - at the bottom, a pulling shaft, rubber - feed on cardan shafts - smooth regulation of the feed speed - 1.5kW feed motor - lifting motor 0.25kW - electric adjustment of the planing thickness - length of the introductory top 1970mm - central lubrication - diameter of the extraction connector 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3350x1400x1430mm - weight about 1500 kg - German production - unpainted - us ...

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...

FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

SECOND-HAND 3 SPINDLES MOULDER WEINIG MOD. UNIMAT SUPER 4 - Working width 25-150 MM. - Working thickness 15-50 MM. - Feeding speedy 5/20 M/MIN. - 1st spindle 11 Kw - 2nd spindle 18.5 Kw - 3rd spindle 5.5 Kw

SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23E - working width mm.230 - infeed working table 2000 mm. - 1st spindle horizontal bottom 4kw - 2nd spindle vertical right 7,5kw - 3rd spindle vertical left - 4th spindle horizontal top 7,5kw - 5th spindle horizontal bottom 4kw - 6th spindle universal 4kw - volt 380/50 - s/n 228-80241 - year 1995 (CE)

SECOND-HAND 5 SPINDLES MOULDER WEINIG PROFIMAT 23 E - CE RULES working width 260 mm working height 160 mm. composition : - horizontal bottom 5.5Kw - vertical right (7.5Kw Rh + Lh) - vertical left - horizontal top 7.5Kw - horizontal bottom 11Kw year 1998 (CE) V 380/50

2-sided planing machine with slot bed: Year of construction 1993 Working width 170 mm Working height 120 mm Working height 4-sided 120 mm Number of spindles 4 Spindle arrangement u-o-u-o Diameter of the spindles 50 mm Spindle speed 6000 rpm Engine power 30-22-11-11 kW Feed speed 12-120 m/min Driven rollers in table 6 Automatic table lubrication Table height constant 840 Diameter of the suction nozzles 4x160 mm Weight 4500 kg Space requirement 4000x1700x1400 mm Voltage / Frequency 400V 50Hz 3Ph.

Weinig Uniplan double-sided planer Planing width 220mm Planing height 15-120mm Horizontal spindle power 2x 5.5kw Spindle speed 6000r.p.m Spindle diameter 50mm Spindles supported on both sides Feed speed 6-32m/min 3kw feed motor

FOUR-SIDED PLANER VINOUS Type: U 23 B.j 1994 Max working height: 180 mm Max working width: 230 mm Bgooeilcyar 6 Spindle

CATALOG NO. 6904 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) horizontal bottom 230mm 5.5kW 6) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up / down, right / left - spindle 1,2,3,4,5 equipped with an electric brake - spindle diameter 40mm - 5 introductory, toothed, pulling rollers from above - from above, 4 rollers, pulling, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - feed on cardan shafts - rollers pressed pneumatically - smooth adjustment of the feed speed - feed motor 4kW - working pressure 6-10 bar - electric setting of planing thickness - motor lifting the body of about 0.55 kW - central lubrication of the co ...

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave