Rebordeadoras

Description: Year of construction 1989 Pressure 150 t Bending length 4050 mm Stand width 3050 mm Stand projection 350 mm Installation height 430 mm Piston stroke 220 mm Table width 300 mm Oil content 390 liters Pressure output 265 bar Total power requirement 18.5 kWweight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,740 x 3,310 mm

pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: CYBELEC ModEva Pac throat: 350 mmdistance between table / ram: 430 mmtable width: 250 mmstroke: 250 mmtotal power requirement: 18,5 kWweight of the machine ca.: 16500 kgdimensions of the machine ca.: 4400x2100x3200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 6050 mmdistance between columns: 5500 mmControl: Cybelec type: ModEva 12 Stotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fuerza de prensado 800 kN Longitud de plegado 3050 mm Carrera del émbolo aprox. 160 mm Altura de montaje de hasta 340 mm Dimensiones largo x ancho x alto: 3750 x 1600 x 2850 mm Peso aprox. 7500 kg Incluyendo herramientas (ver fotos)

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 250 mmquantity of oil: 300 lfrequency: 50 Hz: 63 Avoltage: 3 x 400 Vtotal power requirement: 21,5 kWweight of the machine ca.: 11260 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 3050 mmvoltage: 3x400 Vcontrol voltage: 24 kW: 80 Afrequency: 50 Hz: DNC 1200PS PressCad : 18,5 kWquantity of oil: 350 lheight of the machine: 3360 mmweight of the machine ca.: 12700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 4050 mmquantity of oil: 350 lcontrol voltage: 24 kWcontrol: CYBELEC ModEva 10S total power requirement: 27,5 kWweight of the machine ca.: 14800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 300 mmstroke: 240 mmdayligth: 640 mmquantity of oil: 250 l: total power requirement: kWweight of the machine ca.: 15,00 tdimensions of the machine ca.: m• Cybelec ModEva PAC touch screen control, retrofitted• Pilz safety barrier retrofitted• controlled axes: Y1, Y2, X, R• 6 stop fingers can be moved laterally• Pneumatic die displacement• Upper and lower tool clamping automatically• 2 support arms on linear guides• CNC controlled crowning• Tool package consisting of:• Lower tool V6, segmented• Punch straight H 192, length = 3050mmReplacement blades are not included. Can be ordered in differentradii.• Stamp offset H 220, length = 6x250mmDimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 2250 mmthroat: 300 mmstroke: 240 mmdayligth: 640 mmquantity of oil: 250 lControl: total power requirement: kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 3,90 x 1,80 x 3,00 m• Control: Cybelec DNC 80 2D graphics• Upper tool clamping automatic• Lower tool clamping 90mm and 13mm• controlled axes: Y1, Y2, X1, X2, R, Z1, Z2• motorized crowning• 6 x V block die length 3,500, segmented:with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30°• Straight punch, H 350mm / approx. 70°, length 3060 mm, segmentedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 125 tLongitud del chaflán: 5050 mm Control: Cybelec ModEva Y-carrera rápida: 100 mm/s: 10 mm/s: 100 mm/s Volumen deaceite: 250 l

Detalles: Longitud de la plegadora: 3050 mm Peso: 12.700 kg

Número de máquina: 212 691

pressure: 225 tchamfer lenght: 6050 mmdistance between columns: mmControl: CYBELEC DNC 1200 PS total power requirement: 18,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante: EHT Werkzeugmaschinen GmbH Tipo: 250 - 60 Año de construcción: 1998 Longitud de trabajo: 6050 mm Fuerza de prensado: 250 toneladas Cantidad de aceite: 400 l Corriente nominal: 52 A Corriente nominal del fusible principal: 80 A Potencia del motor principal: 22 kW Tipo de control: DNC 74 PSG

Presión: 300 tChaflán Longitud: 3050 mm Cantidad de aceite: 400 lDimensiones: 4550x3000x3700 mmPeso: 19000 kg

presión: 80 tlongitud del chaflán: - mmdistancia entre columnas: - mmcontrol: Siemens Sinamics G110 potencia total requerida: kWpeso de la máquina aprox.: 5500 kgdimensiones de la máquina ca.: m

Description: serial number: P-1980 control: ERMAK pressing force: 35 tons approach speed: 80 mm/s safety distance: 1500 mm motor power: 5.5 kW serial number: P-1980, Max. pressing force: 35 to, control: ERMAK, total power requirement: 5.5 kW, weight approx.: 3,400 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 2,400 x 2,200 mm

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secreturn speed: 165 mm/secwork speed: 10 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90,0 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7,5 kWback stop - adjustable: 0 - 500 mmWeight: 4.320 kgrange L-W-H: 2.250x1.960x2.750 mm--------------------------Press brake with optional equipment installation height / Cylinderas well as increased bending beam velocities--------------------------Facilities:- DELEM - CNC ER 70 graphics controller- Motion control: Y1 - Y2 - X - R axes- Back gauge with X-axis 800 mm, R = 250 mm with 2 gauge fingers, ball screws- Quick change punch holder AMADA Promecam- Rehfuss-top tool, ground version- Universal die block 60x60 mm with 4V in the die shoe- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- V ...

Presión: 40 tLongitud del chaflán: 1270 mm Peso de la máquina aprox.: 3250 kgDimensiones de la máquina aprox.: 2150x1650x2300 mm

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secreturn speed: 190 mm/secwork speed: 12,0 mm/minwork stroke: 375 mmdayligth: 650 mmoil volume: 300 ltr.table height: 900 mmvoltage: 400 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: serial number: P-887 control: ERMAKSAN max. pressing force: 120 tons approach speed: 80 mm/s safety distance: 1500 mm motor power: 11 kW serial number: P-887, Max. pressing force: 120 to, control: ERMAKSAN, weight approx.: 7,800 kg, Approx. Onsite Dimension. (l x w x h): 2,170 x 3,400 x 2,780 mm

Description: Model 18-07, capacity 160 t, line 11 kW, voltage 380 Vweight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 3,550 x 240 x 3,000 mm

Description: Bending speed: 10,9 mm/s Distance between columns: 3600 mm Table height: 900 mm Daylight: 960 mm serial number: 20,090,208, throat: 410 mm, Crowning : automatic, Max. pressing force: 175 to, Angle measuring system: Yes, bending length: 4,100 mm, number of controlled axes: 6, stroke: 700 mm, rare limit stop: 800 mm, stroke speed -forwards: 200 mm/min, stroke speed -return: 210 mm/min, table surface area l x w : 4100x90 mm, total power requirement: 15 kW, weight approx.: 16,050 kg, Approx. Onsite Dimension. (l x w x h): 6,250 x 6,250 x 4,050 mm

Description: Total strokes (13-03-2024): 61.872 See PDF for more technical information List of tools supplied with the machine: Tool length >,4000 mm Dies: 3209 ,  ,V12 3215 ,  ,V24 3234 ,  ,V50 3223 ,  ,V100 3040 ,  ,V12 ,  ,26 gr. ,  ,  ,R3 Hemming die BMR 55.16.30 ,  ,  ,  ,  ,  , V16 30 gr. Top tool: 1310 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 85 gr. ,  ,  ,R0.8 H115 1030 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 88 gr. ,  ,  ,R0.8 H145 TOP.175.26. ,  ,  ,  , 26 gr. ,  ,  ,R0.8 H145 Note! Loading costs are calculated for the complete machine loaded on a flatbed trailer. If the machine has to be dismantled, adition costs will be chargedserial number: 00025469-ERH, throat: 510 mm, Read of ...

Description: Upright width 850 mm Installation height 470 mm Y-travel 196 mm Y-axis speed 200 mm/sec. Description: Demonstration machine Standard accessories: CNC control Panasonic Toughbook incl. USB and WIFI connection Direct drive via servo motor and ball screw Safety device inc. Dual laser Monobloc machine frame made of Meehanite (700N/mm² tensile strength) Back gauge with 2 axes CNC controlled Ergonomic design Device for internal transport with forklift Upper tool clamping system Amada / Promecam Bottom tool clamping system Amada / Promecam Special accessories: Back gauge 4-axis CNC controlled X / R / Z1 / Z2 Laser Safe Iris Rapid Bend Hydraulic upper tool clamping system Wila 13mm Hydraulic lower tool clamping system Wila 13mm Notes: Ergonomic press brake made from a sturdy monoblock frame (Meehanite cast iron 700N/mm²) The machine has a direct drive via servo motor and ball s ...

Presión: 135 tLongitud del chaflán: 3060 mmPeso: 8800 kg

pressure: 200 tchamfer lenght: 3000 mmdistance between columns: mmthroat: mmdistance between table / ram: mmstroke: mmfeed down: mm/secfeed bending: mm/secfeed up: mm/secengine output: kWweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 3150 mmdistance between columns: 2600 mmControl: CYBELEC VisiTouch 19 2D dayligth: 525 mmstroke: 275 mmfeed down: 150 mm/secfeed bending: 0-10 mm/secfeed up: 120 mm/sectotal power requirement: 18,5 kWweight of the machine ca.: 15.600 kgdimensions of the machine ca.: 4250x2000x3150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Force: 30 tonnes Maximum working length: 2050 mmweight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,200 x 2,100 mm

pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• manual back stop• upper and lower tools• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 135 t: 3100 mm: 2600 mm: 400 mm: 200 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número de ejes 5 Fuerza de prensado kN 1000 Longitud de trabajo mm 2600 Carrera mm 200 Funcionamiento mm/s 10 Velocidad de entrega mm/s 200 Velocidad de retorno mm/s 200 Potencia del motor principal kW 11.4 Control BC 55 Gráficos Barreras de luz Fiessler de seguridad Accesorios Varias herramientas de plegadora Documentación operativa

pressure: 3 tchamfer lenght: 3600 mmdistance between columns: 3100 mmControl: CNC type: M9101 Controllertotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 260 tonnes of power Total bending length 4100 mm Distance between uprights 3150 mm Gooseneck depth 300 mm Apron travel 200 mm ATS 900 numerical control. 3 axes Y1 Y2 X. CNC controlled camber. dsp laser protection. Promecam' toolingweight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 4,270 x 1,750 x 3,000 mm

: 150 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 130 mmthroat: 200 mmdayligth: 310 mmworking feed: 7,0 mm/secreturn speed: 50,0 mm/secControl: konv. work height max.: 905 mmtable width: 180 mmoil volume: 250 Litertotal power requirement: 7,5 kWweight: 7800 kgrange L-W-H: 3500 x 1700 x 2280 mmFurnishing:- simple / conventional electro-hydraulic press brake- swiveling operation, front left- electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display- manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers- Manual (jog mode) and automatic cycle selectable- split deer foot upper tool (segmented)- 2x reversible MULTI V die blocks- 1x freely movable foot control Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9308351The da ...

Características técnicas: La máquina se para sobre el pasillo, no entra en el piso - Capacidad de impresión 400 t - Ancho de trabajo 3100 mm - Paso entre soportes 2600 mm - Ancho de mesa 300 mm - Proyección 400 mm - Altura de instalación 500 mm - Carrera de ariete 550 mm - Altura de la mesa 1000 mm - Accionamiento 400 V / 50 kW - Espacio requerido aprox. An 4100 x H 3800 x D 2200 mm - Máquina de pesas aprox. 24800 kilogramos - Accesorios de peso aprox. 1000 kg -con: - Brazo giratorio – panel de control para profundidad de prensa - Control ATS 460 renovado en 2007 - panel de control a dos manos, interruptor de pie, - Herramienta de afilado 2500 mm - V – matriz 2700 mm - Varias herramientas de plegadora corta

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmstroke: 130 mmdayligth: 325 mmthroat: 250 mmworking feed: 10,0 mm/secreturn speed: 100 mm/sectable width: 180 mmwork height max.: 865 mmControl: M 9101 oil volume: 225 Literengine output: 11,0 kWweight: 11.500 kgDimensions (LxWxH): 4270 x 1500 x 2530 mmFurnishing:- HACO / Robosoft NC control, model M 9101 controller- with external display / screen- pivoting control, front left- electric back gauge (X axis)- with 2x stop fingers, manually adjustable manual windage (Z axis) manual height adjustment (R axis)- hydraulic upper tool clamping- manual table crowning, adjustment with hand crank- segmented upper and lower tools- free-moving 2-hand control- free-moving footswitch- rear protective device (self-made)- User manual in German Machinevideo :https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.beThe data for this  ...

pressure: 400 tchamfer lenght: 4000 mmdistance between columns: 3500 mmControl: CNC type: BC 25 Graphicthroat: 400 mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oferta 22564 Características técnicas: - Capacidad de impresión 150 t - Anchura de trabajo 2600 mm - Paso entre montantes 2100 mm - Ancho de la mesa 180 mm - Proyección 250 mm - Altura de instalación 325 mm - Accionamiento 400 V / 7,5 kW - Necesidad de espacio aprox. 3000 x 2400 x 1600 mm - Peso aprox. 7000 kg - Con: - Panel de control a dos manos con interruptor de pie

Características técnicas: - Capacidad de impresión 150 t - Ancho de trabajo 2600 mm - Paso entre soportes 2100 mm - Ancho de mesa 180 mm - Proyección 250 mm - Altura de instalación 325 mm - Accionamiento 400 V / 7.5 kW - Espacio requerido aprox. An 3000 x alto 2400 x profundo 1600 mm - Peso aprox. 7000 kilogramos -con: - Panel de control de dos manos con interruptor de pie

pressure: 260 tchamfer lenght: 3000 mmdistance between columns: mmupper beam stroke: 250 mmtotal power requirement: kWweight of the machine ca.: 17 tdimensions of the machine ca.: 3,40 x 1,90 x 3,45 m• Controlled axes: Y, X• Control: Haco type PB 2350• Pivoting control panel, left front• Free-moving dual footswitch• Tool package:Stamp straight, H 175mm, approx. R 1.54 V block die V 15.22, 35, 50 mmDie V 100, length = 4 x 835 mmDie V 80, length = 4 x 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2600 mmstroke of upper beam: 120 mmthroat: 250 mmdayligth: 325 mmworking feed: 7.0 mm/secreturn speed: 60.0 mm/sec: 300 barControl: ATL 550 work height max.: 915 mmtable width: 180 mmtotal power requirement: 7.5 kWweight: 8250 kgrange L-W-H: 3500 x 1700 x 2380 mmFurnishing:- simple NC controlled hydraulic press brake, including torsion shaft- including ATLANTIC NC control ATL 550 Positioning of the back gauge (X) Positioning of the depth adjustment (Y1+Y2) Possibility of programming various programs Storage capacity max. 200 programs - max. 400 sets Swivel control panel, front left- electro-motorized, stepless depth adjustment (Y1+Y2 axis)- electro-motorized back gauge (X axis) 2x manually adjustable stop fingers- manual table crowning, including analogue value display- 1x split upper tool set - HACO holder- 1x rotating MULT ...

Presionar la fuerza 80 para Longitud de flexión 2100 mm con sistema de flexión de 3 puntos . Altura de instalación 782 mm Carrera de trabajo 265 mm . Respuesta rápida 150 mm Operación 10 mm Potencia conectada 13 kW Peso de la máquina 7.8 a . Con - Sistema de plegado de 3 puntos - Sujeción de la herramienta hidráulica - almohadillas móviles - Barrera de luz SICK - Sistema de parada de 6 ejes - muchas herramientas . . Reparación de control necesaria ! Detalles en la oferta !

Ancho de la hoja: . mmespesor de la placa: . mmdistancia entre columnas: . mmpresión: tlongitud del chaflán: mmpotencia total requerida: kWpeso de la máquina aprox.: 10 tdimensiones de la máquina aprox.: m

pressure: 100 tchamfer lenght: 2050 mmcontrol: CYBELEC DNC 880S weight: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 300 tLongitud del chaflán: 4100 mmDistancia entre columnas: 3550 mmNº de máquina: 5083 Peso de la máquina aprox.: 24.000 kgNuevo controlador: DNC 884sPSEquipos domésticos: - Eje X y R controlado por CNC - Coronación controlada por CNC - Sujeción hidráulica del sello - Barrera de luz de seguridad Fiessler

Description: maximum pressing force 175 t, maximum stroke 300 mm, throat 300 mm, ram distance 700 mm, working length 2050 mmweight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,200 x 3,300 mm

Description: working length: 2500 mm max. pressing force: 80 t manually adjusts the limiter possibility of adjusting the left and right sides by height no documentation  , please also have a look at the video of this machine Max. pressing force: 80 to, bending length: 2,500 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,600 x 1,650 mm