Modelo
(Fabricante: ALZMETALL)
Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Alzmetall, bench drill type AX2-T/S with base -Clamping table: 255 x 255 mm -Travel: 335 mm -Spindle holder: MK2 with drill chuck -Projection: 250 mm -Speed speeds: 125 - 2400 rpm continuously -Column: diameter 90 mm -Spindle stroke: 100 mm -Thread cutting device -Dimensions: 1000/700/H1740 mm -Total weight: 196 kg
Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg
Drill press, drill press, stand drill, pillar drill -Table size: 400 mm -spindle taper: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP transmission -Feed: 0.09-0.28 mm/rev -Tachometer: defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg
Drill press, drill press, pillar drill press, pillar drill press, tapping machine, tapping machine -Manufacturer: Alzmetall, column drilling machine type AB3ES -Motor: 0.9/1.3 kW -Speeds: 65 - 1750 rpm, infinitely variable -Table size: 300 x 400 mm, travel 550 mm -Spindle mount: MK3 -Spindle stroke: 165 mm - Projection: 290 mm -Columns Ø: 115 mm -Dimensions: 900/560/H1840 mm -Weight: 336 kg
Drilling machine, pillar drilling machine, pillar drilling machine, pillar drilling machine, tapping machine, thread cutting machine -Manufacturer: Alzmetall, column drill type AB 3 ESV -Motor: Loher 1.5 kW -Speeds: 110 - 1450 rpm, continuously right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Table size: Ø 370 mm, travel 735 mm -Spindle mount: MK3 -Spindle stroke: 170 mm -Throat: 280 mm -Column Ø: 130 mm -Dimensions: 940/650/H1830 mm -Weight: 398 kg with pallet
Drilling machine, pillar drilling machine, pillar drilling machine, pillar drilling machine, tapping machine, thread cutting machine -Manufacturer: Alzmetall, column drill type AB45/S -Motor: 3.3/4.1 kW -Speed speeds: 60 - 1530 rpm, continuously variable -Feed: 0.15/0.2/0.3/0.36 1/rev. -Table size: 450 x 600 mm, travel 640 mm -Spindle mount: MK4 -Spindle stroke: 180 mm -Throat: 350 mm -Columns Ø: 200 mm -Dimensions: 1050/720/H2000 mm -Weight: 728kg
Capacidad de perforación en acero (diámetro): 30 mm garganta: 290 mm carrera de orificio: 150 mm cono MK: 3 MK tamaño de la mesa: 320 x 370 mm diámetro de perforación de roscas: mm avances: mm /U velocidades de giro: 80 - 1400 U /min Potencia total requerida: 2,0 KW peso de la máquina aprox.: 0,35 t dimensiones: 0,6 x 0,8 x 1,95 m Taladradora de columna con: - Velocidad variable del husillo- Luz de la máquina
bore capacity in steel (diameter): 40 mm throat: 280 mm bore stroke: 180 mm taper MK: 4 MK table-size: 620 x 470 mm feeds: 0,1 - 0,2 - 0,3 mm/U turning speeds: 110 - 2900 U/min total power requirement: 1,9 KW weight of the machine ca.: 0,55 t dimensions: 1,2 x 0,8 x 2,1 m Column drilling machine with: - Feed - variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117 / 701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160 - 2250 UpM total power requirement: 1,45 / 1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pu ...
número de husillos: 3 capacidad de ánima en acero (diámetro): 40 mm carrera del ánima: 180 mm peso de la máquina aprox.: 2,3 t
bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 165 mm spindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/min table width: 742 mm table depth: 594 mm total power requirement: 2,2 kW weight of the machine ca.: 700 t Feed with electromagnetic feed clutch 0.1/0,2/0,3 right- and left rotation Cooling unit not available Table and Drilling Head height adjustable height adjustment of upper drilling unit: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 295 mm bore stroke: 160 mm spindle turning speed - stepless: 110 - 2900 U/min column diameter: 115 mm table-size: 400 x 300 mm spindle taper MT: 3 bore capacity in cast iron: 40 mm total power requirement: 1,2 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 700 x 900 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...
bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron (diameter): 38 mm threading cutting capacity:: M20/M30 drive capacity - spindle motor: 1,9 kW spindle taper MT: 3 turning speed range: 160- 2250 U/min column diameter: 115 mm table surface area: 300 x 300 mm distance spindle /table: 642 mm distance spindle/base plate: 1207 mm dimensions: 0,7 x 0,45 x 1,85 m weight: 260 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used Pillar Drilling Machine in very good condition. - stepless spindle speed - spindle left/right - Manual tapping (manual change direction of rotation) - Manuel Depth gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacidad de orificio en acero (diámetro): 26 mm Garganta: 290 mm Carrera del orificio: 160 mm Velocidad de giro del husillo - continuo: 120-2200 U/min Peso de la máquina aprox.: 460 kg Dimensiones de la máquina aprox.: 500 x 800 x 1900 mm
capacidad de perforación en acero (diámetro): 65 mm tira: 390 mm carrera del ángulo: 250 mm mácdora Cónico MT: 5 tamamaría de la mesa: 880x670 mm velocidad de giro del huso - sin escalones: 40-800 U/min peso de la máquina aprox.: 1,2 t
x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain type: TNC 426 table surface area: 1250x630 mm workpiece weight: 1000 kg Tool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/min total power requirement: kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,2x3,3x3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain type: TNC 426 table surface area: 1250x630 mm workpiece weight: 1000 kg Tool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/min total power requirement: kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,2x3,3x3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore diameter: 65 mm throat: 380 mm Control: PLC-Steuerung bore spindle turning speed range: 63 - 1600 U/min table-size: 630 x 500 mm rapid traverse Z-axis: 4,75 m/min boring feeds:: 0,05 - 0,56 mm/U total power requirement: 9 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1,50 x 1,20 x 2,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 34,0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1.800 U/min engine output: 1,4 / 2,2 kW column diameter: 145 mm thread: M24 ST60 thread: M30 GG20 feed: 0,1-0,2-0,3-0,4 mm/U weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinite ...
bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 80 - 1.125 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm thread: M24 ST60 thread: M30 GG20 feed: 0,10 + 0,20 mm/U weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely va ...
bore capacity in steel (diameter): 55,0 mm throat: 300 mm bore stroke: 140 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 70 - 1.200 U/min engine output: 1,8 / 2,9 kW column diameter: 145 mm thread: M30 ST60 thread: M36 GG20 feed: 0,10 + 0,30 mm/U weight: 380 kg Machine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spi ...
Bohrleistung in Stahl (-Ø: 36 mm throat: 350 mm bore stroke: 180 mm Bohrleistung in Guß (-Ø: 45 mm spindle taper: MT: 4 spindle head adjustment: Ý 500 mm table surface area: 600 x 700 mm floor plate:: 460 distance work spindle /surface of the table: 80 - 750 mm spindle turning speed range: 0,09 - 0,28 U/min feeds: 380 mm/WU voltage: 50 V power capacity: 2,5 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 0,6 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 385 mm bore stroke: 240 mm table surface area: ø 500 mm spindle taper MT: 5 spindle turning speed range: 40 - 800 U/min feeds: 0,1/0,14/0,2/0,28/0,4 mm/U column diameter: 220 mm distance between table/spindle: max. 670 mm distance spindle/base plate: 1180 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of machine L x W x H: 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel St 60: 25 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2x14x224 mm distance spindle - column min./max.: 132/724 mm feed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min. engine: 1,0/1,6 kW voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) Pos. 24 Coolant device A, consisting of: Coolant base plate with machined Workpiece support surface 320x320 mm and 2 T-slots, pump with Motor protection switch, complete fitting The data for this ad was created with ModulMWS - ...
: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 26 mm : 30 mm : 30 mm threading in St 60: M 20 threading in GG 20: M 24 : MK 3 : 120-2.200 U/min. throat: 293 mm : 514x360 mm : 2 x 14 x 224 mm : 90/675 mm column diameter: 115 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,0/1,6 kW Machine height: 1865 mm weight: 380 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely va ...
: Alimentación JA : 80 - 800 m/min : 1848 Peso de la máquina aprox.: 2,2 t
: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 470 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...
: 40 mm : M 24 : M 30 : MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514x360 mm : 2 x 14 x 224 mm : 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm bore capacity in cast iron: 46 mm : 50 mm : M 30 : M36 : MK 4 throat: 300 mm : 100-1600 U/min. : 615x430 mm : 2x14x224 mm Distance spindle/table max.: 147/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U height of the machine: 1885 mm drive motor: 1,8/2,9 kW weight of the machine ca.: 450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 93 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : M 24 : M 30 : MK 4 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514x360 mm : 2 x 14 x 224 mm : 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 23 mm threading in St 60: M14 threading in GG 20: M16 : MK 2 spindle stroke: 100 mm : 125-2400 U/min. throat: 250 mm column diameter: 90 mm : 370x300 mm : 2x14x160 mm distance spindle /table: min./max. 125/455 mm : Handkurbel : 320x250 mm : 2x14x160 mm : 625/625 mm feed: von Hand height of the machine: 1095 mm weight of the machine ca.: 160 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete ...
: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 470 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...
: 40 mm threading in St 60: M24 threading in GG 20: M30 : MK 3 : 160 - 2250 U/min. spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm distance spindle /table: min. 117 / max. 701 mm feed: 0,1 + 0,2 mm/U height of the machine: ca. 1840 mm weight of the machine ca.: ca. 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 605 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...
: 26 mm : 30 mm : 30 mm : M 20 : M 24 : MK 3 : 120-2.200 U/min. throat: 293 mm : 515x360 mm : 2 x 14 x 224 mm : 90/675 mm column diameter: 115 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,0/1,6 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 55 mm : M42 : M56 : MK 4 spindle turning speed - stepless: 70-2400 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg engine output: 3 kW Standard equipment: - Main switch with motor protection switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm threading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm : 160 - 2250 U/min. throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm distance spindle /table: min. 117 / max. 701 mm feed: 0,1 + 0,2 mm/U height of the machine: ca. 1840 mm weight of the machine ca.: ca. 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 34 mm : 40 mm : 40 mm : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,4/2,2 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting The data for ...
: 34 mm : 40 mm : 40 mm : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,4/2,2 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting The data for ...
: 12 mm : M 10 : B 16 : 250 - 5000 U/min. spindle stroke: 40 mm throat: 200 mm column diameter: 50 mm : 2 x 12 x 80 mm : 300x240 mm : 2 x 12 x 80 mm : 110 / 250 mm feed: von Hand : Handrad Machine height: 670 mm total power requirement: 0,7 kW weight: 64 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.