usado BIESSE para la venta

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change de ...

Description: Biesse Rover A4.55 - CNC Center , Model: Biesse Rover A4.55 Type: 4-axis CNC Center Year: 2010 Working Area: 5500mm x 1250mm Rails: 10 Tooling: Router, Drilling Unit, Horizontal Motor Axis: 4-axis (including C-axis) Tool Magazine: 20 positions (Without tools) Aggregates: Floating, 1-exit, 2-exits, Sawblade Tool Holder Type: ISO30 Features: Reference Stops, Detection Sensors, Thickness Measurement vacuum pump: 250 m³/h, 5-axis machining: No, x-motion: 5,680 mm, y-motion: 1,460 mm, z-motion: 200 mm, Approx. Onsite Dimension. (l x w x h): 7,900 x 4,500 x 1,980 mm, weight approx.: 3,900 kg

Description: Type of work Drilling Routing X axis working area 6000 mm Y axis working area 1850 mm Working Table Pod and Rail Main Electrospindle power 7.5 KW Number of controlled axes 4 axes Total number of drilling spindles 42 Total number of tool changer positions 7 No. of Rails 10 Vacuum pump ROUTER SPINDLES Unit : top No. controlled axes : 4 Automatic tool change : yes Motor power : 7.5 kw GROOVING UNIT , Max. tool diameter : 160 mm Motor power : 3 KW TOOL MAGAZINE , No. positions : 7 Tool : positioned on the machining head Control system NC 1000 TOOLS NOT INCLUDED  , Approx. Onsite Dimension. (l x w x h): 7,700 x 3,400 x 3,000 mm, weight approx.: 7,000 kg

Description: Max. panel width 3200 mm Max. panel length 1200 mm No of Bottom Units 6 No of Top Units 4 Lateral horizontal groups , Automatic waste ejection system TOOLS NOT INCLUDED Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Number of spindles for vertical drilling: ,14 + 12 Number of spindles for horizontal drilling 4-sided: ,6 + 2 Max. panel thickness: 115 mm Spindle speed: ,4000 rpm Routing rotation speed: 1000 - 24000 rpm Routing: ISO 30  ,  ,  , vacuum pump: 120 m³/h, serial number: 60,835, total electrical load: 14 kW, 5-axis machining: Yes, Number of vacuum pumps: 1 pieces, x-motion: 3,372 mm, y-motion: 1,200 mm, z-motion: 125 mm, path-feed rate max. X-axis: 75 m/min, path-feed rate max. Y-axis: 75 m/min, path-feed rate max. Z-axis: 15 m/min, saw unit: 0 - 90 graden roteerbaar, control: NC481, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,000 mm, weight approx.: 4,500 kg

Description: X stroke: 3390 mm Y stroke: 1850 mm Z stroke: 180 mm - HSK63 electro-spindle - 4 axes - 24-spindle vertical drilling unit - 6 horizontal milling unit - blade groove - 8-beam work surface - pivoting suction cups - work areas - clamps - BIESSE WORKS software and panel optimisation - 12-position tool magazine on Z carriage - Independent blade for grooving in the X axis - Front protection and safety system with belt - Perimeter protection grids - Automatic lubrication system - Air conditioning system for cooling and cleaning the machine control unit - Vacuum pump mc / h 250 - with electrical cabinet - Accessories (32 milling cutters, drills, etc.) Machine sold without tools or accessories Approx. Onsite Dimension. (l x w x h): 13,000 x 2,200 x 2,600 mm, weight approx.: 4,650 kg

Description: Type of work Drilling Routing X axis working area 3060 mm Y axis working area 1395 mm Working Table Pod and Rail Main Electrospindle power 9 KW Number of controlled axes 3 axes Total number of drilling spindles 28 Total number of tool changer positions 7 X axis work area 2971 mm Y axis work area 1395 mm No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 6 Vacuum pump yes No. pumps 1 Single capacity 250 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 20 Horizontal Boring Spindles in X : 6 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 28 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Automatic tool change : yes Motor power : 9 kw Tool magazine 1 TOOL MAGAZINE 1 No. positions : 7 Tool : positioned on the machining head Control system WINDOWS XP Machine programming ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Pressure with rubber belt NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Constructor model : RT20 motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine no. positions 6 Gluing system yes glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping Constr ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Max. forward feed speed 24 m/min Top pressure , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit Constructor model : RT20 automatic timed intervention : , motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine , no. positions 6 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.37 KW r.p.m. : 12000 RPM NO. EDGE PROCESSI ...

Description: Position: 1 SubFamily: Edgebander BATCH 1 Brand: BIESSE Model: STREAM B1 10.5 MDS Type of edging Thin edge Thick edge Gluing System EVA Hotmelt  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , Premilling Unit , Corner Rounding Unit Grooving Unit , Maximum panel thickness 60 mm Max. panel height 60 mm Min. panel length 150 mm Min. panel width 65 mm Min. edge thickness 0.3 mm Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , MDS No. Panel Sizing / Milling units Unit : pre-milling unit automatic timed intervention Edge coil magazine , no. positions 12 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , no. pressure roller 4 with positioning by NC , No. Edge Process ...

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: Machine Specifications: Model: BIESSE ROVER B 4.50 Year of Manufacture: 2006 Operating System: BiesseWorks on Windows XP Number of Axes: 3 X-axis: 5220 mm Y-axis: 1750 mm Z-axis: 225 mm Spindles: 1 Main Motor Power: 12 kW Maximum RPM: 18000 Work Area: Effective Work Area: 6m x 1.3m Workpiece Depth: Adjustable (slightly larger than the nominal depth) Tooling: ISO30 Tool Holder Toolholder Included (Tools not included) Variety of toolholders, including saw aggregate for X, Y, or 45° cuts Tool Magazine: Capacity: 12 positions Table Configuration: 8 Tables 4 Vacuum Blocks per Table Additional Features: Serial Number: 71035 3-Axis Machining Year of Construction: 2006 Air Supply: 7 Bar Mass: 5700 kg Power Supply Voltage: 380 VAC Rated Current: 38 A Number of Power Supply Phases: 3 Power Consumption: 21.1 kW Frequency: 50 Hz Biess ...

Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unit Approx. Onsite Dimension. (l x w x h): 10,700 x 1,250 x ...

Machining center in impeccable condition. Very few hours of work. Sold due to change of country of residence.

CNC machining center Biesse Rover A1542 Year of production 2021 Working fields : X = 4140 mm Y = 1560 mm Z = 275 mm C = 360 degrees 8 pcs. of ATS beams - 24 carriages 8 pcs. Rear line bumper, stroke 115 mm, extension 25 mm 8 pcs. Middle line bumper, mounted at 685 mm, stroke 140 mm 8 pcs. Front line bumper, stroke 1348 mm, extension 140 mm. 4 side bumpers with 140 mm stroke (2 left + 2 right) including pneumatic installation. 4 removable center bumpers with 140 mm stroke (2 Left + 2 Right) including pneumatic installation. BUSCH pump with a capacity of 290 m3/h Electro-spindle 13.2 kW (17.7 hp) HSK F63 and air cooling BH 29 2L drilling head with automatic lubrication. 16-position turreted tool magazine mounted on X-axis carriage 8-position magazine for quick tool change In addition, HSD angle aggregates The machine has only 2000 hours of operation

Rover Machining center biesse rover c6.50 very good condition about 6000 h, one 4 axis spindle, 1 3 axis spindle, drilling block biesse works software Machine visible in operation

Machining center Biesse Rover B 4.50 The machine is in very good condition and is regularly serviced. Biesse Works software Remote control for manual control Automatic tool change system with 12 positions - located on the working head Working area in the X axis 4600 mm The working area in the Y axis is 1342 mm

Working table 6 beams for 3 trolleys 12kw ISO 30 spindle electro-spindle Vacuum pump 250 Revolver tool magazine, 10 items Drilling head Bh21L 14 vertical / 6 horizontal spindles A ball to make grooves Drilling head after major refurbishment Becker pump replaced with a new one in 2014, in 2017 listed graphite vanes The latest version of BiesseWorks has been loaded in the machine Machine serviced, in constant use

X-Axis travel 3640 mm Y-Axis travel 1342 mm Z-Axis travel 225 mm X-Y-Z axes speed 80 - 80 - 30 m/min Chip suction socket ⌀ 250 mm Loadable piece 180 mm Installed power 22 kVA Working air pressure 7.5 bar Air consumption for dust extraction 5300 m3/h Dimensions L 5865 x W 4650 x H 2560 mm Weight 3900 kg

220 x430 cm flat fiber table and double 250 cm Bekcer vacuum engine Boring group and milling separate motor There is a hole group that can be connected to a side hole and saw. 10 vertical drill clamping capacity

NESTING MACHINE IN EXCELLENT CONDITION WITH AUTOMATIC LABEL PRINTING AND AUTOMATIC LOADER/UNLOADER, 3 AXIS

Biesse Rover 23 Numerically Controlled Machining Center, currently in use and maintained by Biesse Iberica Milling, drilling, cutting, pocketing, etc... Working field in X axis 2900 mm Working field in Y axis 1300 mm Working stroke in the Z axis 150 mm

Expansive Work Area: 2,720 x 926 mm, accommodating a variety of woodworking projects. Versatile Material Handling: Capable of processing materials up to 50 mm thick, allowing for diverse applications. Comprehensive Drilling System: Equipped with 4 X-axis drills, 2 Y-axis drills, and 13 vertical drills, ensuring precision in every task. High-Performance Milling Head: A robust 5.5 kW milling head with an MK2 - ISO30 tool holder, designed for superior precision and durability. Optimized Power Supply: Functions on a 14 kW, 380 V, 20 A, 50 Hz power supply, tailored for efficient operation. Pneumatic Supply Requirements: Requires a minimum pneumatic supply of 7 bar, ensuring smooth and consistent machine performance. Manufacturer Overview: The Biesse Rover 321R is crafted by Biesse Group, a global leader in technology for processing wood, glass, stone, plastic, and metal. Founded in Pes ...

La canteadora controlada por CNC sirve para cantear paneles curvos y perfilados Espesor del panel: 16 - 50 mm. Espesor del borde: 0,8 - 3 mm. Dimensiones: mín. 400 x 400 mm, máx. 1800 x 1800 mm 650 x 2500 mm Unidad 1: Rodillo de pegamento con cargador de bobina de borde Bote de cola con capacidad de 3 l. Unidad 2: motor del motor de corte final 0,8kW Unidad 3: Motor de la unidad de corte 2 x 2,2kW