usado EHT para la venta

Fabricante: EHT Werkzeugmaschinen GmbH Tipo: 250 - 60 Año de construcción: 1998 Longitud de trabajo: 6050 mm Fuerza de prensado: 250 toneladas Cantidad de aceite: 400 l Corriente nominal: 52 A Corriente nominal del fusible principal: 80 A Potencia del motor principal: 22 kW Tipo de control: DNC 74 PSG

Datos técnicos: - Longitud máxima de trabajo 1250 mm - Paso del soporte 1050 mm - Fuerza máxima de prensado 80 t - Trazo 250 mm - Extensión del soporte 300 mm - altura máxima de la instalación entre Mesa - Vigas de prensa 560 mm - Velocidades de elevación - Velocidad de inactividad máxima 100 mm/seg - Velocidad ascendente 100 mm/seg - Velocidad de prensa hacia abajo máx. 12 mm/seg - Potencia total de accionamiento 15 kW - Requerimiento de espacio aprox. W 1750 x H 3400 x D 2000 mm - Peso aprox. 8500 kg - con: - CNC - Control CYBELEC DNC 7400 PSGY - X controlado - eje trasero 5 - 1000 mm - Z - eje en tres etapas pneum. Ajustable - Dedos de parada móviles y plegables manualmente - desplazamiento neumático controlado de troquel - hydr. Sujeción de herramientas - bombardeo manual - 2 piezas apoyan brazos - Herramie ...

Datos técnicos: - Ancho de corte máximo 3050 mm - Potencia máxima de corte a 45 Kp/mm2 4 mm - hydr.. Ajuste del ángulo de corte - Número de titulares 18 stk - Número de trazo hasta 24 /min - Tope de ángulo delantero 1100 mm - 3 piezas brazos de soporte frontal 750 mm - mot. Tope trasero con control de posicionamiento 5 - 1000 mm - Estan de alto mantenimiento - Iluminación de línea de corte - E - Botón de pie - Protección de la habitación con barrera de luz - Unidad 400 V / 9.5 kW - Requerimiento de espacio aprox. W 3900 x H 1850 x D 2100 mm - Peso aprox. 5,7 t

Presión: 150 t Ancho de trabajo: 4500 mm ancho del soporte ligero: 3050 mm Extensión del soporte: 300 mm Parada trasera: 1000 mm electr. Conexión: 380 V, 18,5 kW Peso: 14,8 t Requisito de espacio: 4200 x 2000 x 3000/3150 mm

Ref.-No.00804 Descripción Plegadora hidráulica Herramientas incluidas Fabricante: EHT Tipo EHT VarioPress 320 Año de construcción 1997 1997 Presión regulable de forma continua: 3200 kN 320 toneladas Anchura máxima de trabajo: 3550 mm 3550mm Anchura de trabajo entre montantes: 3050 mm Proyección del soporte: 350 mm Altura de la mesa: 900 mm Carrera del émbolo: 270 mm Ajuste del bisel del émbolo: 15 mm Con dispositivo de bombeo y dispositivo de sujeción rápida para herramientas superiores Velocidad de elevación: vacío 100 mm/s, bajo carga: 10 mm/s, retracción: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 ejes

Fuerza de prensado 800 kN Longitud de plegado 3050 mm Carrera del émbolo aprox. 160 mm Altura de montaje de hasta 340 mm Dimensiones largo x ancho x alto: 3750 x 1600 x 2850 mm Peso aprox. 7500 kg Incluyendo herramientas (ver fotos)

Plegadora CNC Fabricante EHT Tipo EHPS 20-35 Año de construcción 1995 Control DNC800 Longitud de plegado 3550mm presión de prensado 200t Las matrices de bloques y segmentos también están disponibles Documentación e instrucciones de funcionamiento disponibles La máquina fue revisada hace 3 años y dejada de lado. Ya no está energizado.

Presión: 250 t Ancho de trabajo: 3550 mm ancho del soporte ligero: 3050 mm Extensión del soporte: 300 mm Golpe de espalda: sí electr. Conexión: 400 V, aprox. 26 kW Peso: 20 t Requisito de espacio: 2100 x 3800 x 3100 mm

MARCA: EHT AÑO: 1991 MODELO: EHPS 25-30 TIPO DE APLICACIÓN: DOBLADO UBICACIÓN: ALEMANIA TIPO DE MÁQUINA: DOBLADORAS DISPONIBILIDAD: INMEDIATA Información técnica ACCIONAMIENTO PRINCIPAL FUERZA DE PRENSADO: 2500 KN

MARCA: EHT AÑO: 1998 MODELO: VARIOPRESS 250 60 TIPO DE APLICACIÓN: DOBLADO UBICACIÓN: ALEMANIA TIPO DE MÁQUINA: DOBLADORAS DISPONIBILIDAD: INMEDIATA Información técnica DATOS GENERALES ANCHO DE MEDIDAS: 8400 MM PROFUNDIDAD DE MEDICIONES: 3900 MM MEDIDAS ALTURA: ALTURA TOTAL SOBRE EL SUELO: 4070 MM, PROFUNDIDAD TOTAL BAJO EL SUELO: 950 MM PESO DE LA MÁQUINA: 42800 KG UNIDAD DE CONTROL MARCA: CYBELEC MODELO: DNC70 UNIDAD PRINCIPAL FUERZA DE PRENSADO: 2500 KN LONGITUD DE PLEGADO: 6050 MM Información adicional BENEFICIOS DE LA MÁQUINA BENEFICIOS TÉCNICOS DE LA MÁQUINA: - DISTANCIA ENTRE MONTANTES DE LA MÁQUINA: 5550 MM - PROYECCIÓN DE COLUMNA: 350 MM - CARRERA DE LA RAM: 270 MM - DISTANCIA ENTRE LA MESA Y LA RAM: MÍN. 360 MM A MÁX. 630 MM - VELOCIDAD DE CARRERA: RALENTÍ MÁX. 100 MM / S, CARRERA DE PRESIÓN MÁX. 8 MM / S, RETRACCIÓN MÁ ...

presión: 1500 kN camfer longitud: 3550 mm distancia entre columnas: 3044 mm Control: Cybelec 34 PS-CN brazo de columna: 350 mm máx. carrera de ariete: 220 mm dimensiones de la máquina ca.: 3200 x 4200 x 2100 m soporte de hoja: hinten / back número de brazos de soporte: 2, verschiebbar / adjust. desplazamiento de matriz: sujeción hidráulica de herramientas: sistema de cambio rápido de herramientas de suministro: cotilla: 3 juegos de herramientas incluidos

ancho de chapa: 5000 mm pesor de placa: 6 mm distancia entre columnas: 5030 mm tira: 340 mm peso de la máquina ca.: 14 t dimensiones de la máquina ca.: 5500 x 2250 x 2200 mm

pressure: 320 t chamfer lenght: 7250 mm distance between columns: 6550 mm Control: throat: 400 mm ram - range of adjustment: 270 mm stroke: 270 mm table surface area: 7250x400 mm dayligth: 560 mm fence: 5-1000 ja /nein total power requirement: kW weight of the machine ca.: 53 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6000 mm plate thickness: 6 mm distance between columns: 610 mm Control: Elgo 87 P2 total power requirement: 15 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 6050 mm distance between columns: 5500 mm Control: Cybelec type: ModEva 12 S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm throat: 300 mm stroke: 240 mm dayligth: 640 mm quantity of oil: 250 l : total power requirement: kW weight of the machine ca.: 15,00 t dimensions of the machine ca.: m • Cybelec ModEva PAC touch screen control, retrofitted • Pilz safety barrier retrofitted • controlled axes: Y1, Y2, X, R • 6 stop fingers can be moved laterally • Pneumatic die displacement • Upper and lower tool clamping automatically • 2 support arms on linear guides • CNC controlled crowning • Tool package consisting of: • Lower tool V6, segmented • Punch straight H 192, length = 3050mm Replacement blades are not included. Can be ordered in different radii. • Stamp offset H 220, length = 6x250mm Dimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 m The data for this ad was created with ModulMWS - the softwar ...

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 2250 mm throat: 300 mm stroke: 240 mm dayligth: 640 mm quantity of oil: 250 l Control: total power requirement: kW weight of the machine ca.: 12,00 t dimensions of the machine ca.: 3,90 x 1,80 x 3,00 m • Control: Cybelec DNC 80 2D graphics • Upper tool clamping automatic • Lower tool clamping 90mm and 13mm • controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • motorized crowning • 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, H 350mm / approx. 70°, length 3060 mm, segmented The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2250 x 3200 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm weight of the machine ca.: ca. 15.000 kg height of the machine: 3.900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 t chamfer lenght: 4050 mm quantity of oil: 350 l control voltage: 24 kW control: CYBELEC ModEva 10S total power requirement: 27,5 kW weight of the machine ca.: 14800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 t chamfer lenght: 6050 mm distance between columns: mm Control: CYBELEC DNC 1200 PS total power requirement: 18,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 4 mm back stop - adjustable: 10-1000 mm no. of strokes: ca. 20 Hub/min cutting angle: 1 ° table height: 850 mm total power requirement: 8 kW weight of the machine ca.: 3300 kg dimensions of the machine ca.: 2500x2000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 3050 mm voltage: 3x400 V control voltage: 24 kW : 80 A frequency: 50 Hz : DNC 1200PS PressCad : 18,5 kW quantity of oil: 350 l height of the machine: 3360 mm weight of the machine ca.: 12700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

N.º de tejido: 202 395 Longitud de trabajo: 2550 mm Salida: 2000 KN Recorrido de seguimiento: 13 mm Distancia de seguridad: 176 mm

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 300 mm stroke of ram: 240 mm quantity of oil: 200 l rated current: 27 A total power requirement: 11 kW weight of the machine ca.: 14000 kg dimensions of the machine ca.: 5675X3040X2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 250 mm quantity of oil: 300 l frequency: 50 Hz : 63 A voltage: 3 x 400 V total power requirement: 21,5 kW weight of the machine ca.: 11260 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm Control: CYBELEC ModEva Pac throat: 350 mm distance between table / ram: 430 mm table width: 250 mm stroke: 250 mm total power requirement: 18,5 kW weight of the machine ca.: 16500 kg dimensions of the machine ca.: 4400x2100x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la hoja: 3000 mm Espesor de la placa: 10 mm

Presión: 175 t Longitud del chaflán: 4050 mm Control: DNC 1200 PS peso de la máquina aprox.: kg

Presión: 125 t Longitud del chaflán: 3550 mm Distancia entre columnas: 3050 mm Brazo de columna: 300 mm Carrera del ariete: 240 mm Cantidad de aceite: 200 L Potencia total requerida: 11 kW Peso de la máquina aprox.: 14000 kg

Presión: 110 t Longitud del chaflán: 2550 mm Cantidad de aceite: 390 l

Presión: 125 t Longitud del chaflán: 5050 mm Control: Cybelec ModEva Y-carrera rápida: 100 mm/s: 10 mm/s : 100 mm /s Volumen de aceite: 250 l

Presión: 300 t Chaflán Longitud: 3050 mm Cantidad de aceite: 400 l Dimensiones: 4550x3000x3700 mm Peso: 19000 kg

sheet width: 3050 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm cutting angle adjustment: 0,5 - 2,5 ° cutting gap adjustment: 0,05 - 1,0 mm back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 14 Stück strokes per minute: 12 - 25 oil volume: 300 Liter 0: max. 300 bar voltage: 400 V main drive: 18,5 kW weight of the machine ca.: 10.000 kg. dimensions of the machine ca.: 4080 x 2350 x 2060 mm maintained condition () was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Aut ...

sheet width: 3200 mm plate thickness: 4,0 mm distance between columns: 3300 mm daylight opening: OW 400 mm adjustment: UW 80 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN air pressure - required: 4.5 - 6.0 bar total power requirement: 9,8 kW oil volume: 160 l weight: 8500 kg range L-W-H: 4550 x 2530 x 2275 mm well-maintained machine with lots of special accessories () last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 Swivel control panel, front right - CNC controlled / electro-motorized back gauge pneumatic / lowerable material stop fingers Adjustment speed max. 250 mm/sec. Drive power 0.5 kw Sheet metal support table at the back - motorized lower beam adjustment (S axis) Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam Adjustment range max. 400 mm Lifting ...

pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line .. 5.0 - 1.000 mm Adjustment speed .. max. 250 mm/sec. - CN ...

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2740(1890) x 3310 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: / mm plate thickness: / mm distance between columns: / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80, ELCO 85 P Lower knife height adjustment The data for this ad was created with ModulMWS - the software soluti ...

Pressing force: 1250kN, bending length: 2550mm, oil volume: 250l, control: DNC 806 PS/K.

Working length: 3050mm, sheet thickness: 10mm.

This EHT VarioPress 225-30 Bending machine was manufactured in the year 1997 in the Netherlands.

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

Description: Year of construction 1989 Pressure 150 t Bending length 4050 mm Stand width 3050 mm Stand projection 350 mm Installation height 430 mm Piston stroke 220 mm Table width 300 mm Oil content 390 liters Pressure output 265 bar Total power requirement 18.5 kW weight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,740 x 3,310 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.

Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm -Socket: Ø 25 mm -Price: complete -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg