Gabler D600 Termoformador, edad 2000:- Soporte de desenrollar Indización de servomotores indramat. Calentadores superiores e inferiores, capacidad total 73,9 kW Estación formadora de servomotores indramat Superficie de formación: 600 x 320 mm Profundidad de dibujo neg./pos.: 40/15 mm Estación de apilamiento y conteo Productos contados/apilados transferidos automáticamente al transportador de entrega Generador de material eswasteno Controlador PRINCIPAL del PLC de la máquina: Siemens SIMATIC S5 P3 3A Controlador PLC calentador: Siemens SIMATIC S5 95U Panel de control del panel táctil del operador (OPC) : Siemens SIMATIC OP27 La máquina ha sido renovada en 2014, nuevo conjunto de levas añadido sin aliento durante la renovación. Excelente condición de producción
Equipo / otra información: • Paredes protectoras alrededor de la máquina. Superficie de moldeo (VxH): 450x220 Profundidad de dibujo: 150 mm (min.) Espesor del material: 0,65 mm (máx.) Espesor del material: 2 mm
Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.
The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different prod ...
SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.) Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Date of acceptance to accounting: 04/30/2014. Main technical characteristics: Area of forming surface, mm Maximum - 450x220 Minimum - 430x180 Maximum width of the tape, mm 480 Maximum tape thickness, mm 2 Maximum depth of molding, mm 125 Maximum noise level, dB Not more than 80 Tact at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Voltage 230 / 400V, 50Hz Total power consumption, kW 64.15 Operating air pressure, bar 8 Dimensions (l ...