Longitud de torneado: 1200 mm Diámetro de rotación: 380 mm por encima de la cama Paso del husillo: 50 mm Velocidades del husillo: 35 - 1.500 rpm. Equipado con: - Mandril de 3 mordazas con diferentes mordazas - Tanque de acero País de origen: Reino Unido Máquina LxWxH: 2500 x 950 x 1200 mm Peso de la máquina: 1200 kg
Harrison en ÓPTIMAS CONDICIONES. SH 200 mm SW 1500 mm Contrapunto MK5 Puente desmontable Salida de emergencia, Bremese, Protección de alimentación Sistema de refrigeración Placa frontal 2 mandril de torno Dispositivo de molienda Mueble con accesorios de alta calidad.
Fresadora universal Velocidad 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Velocidad de avance en x eléctrico Bomba de refrigerante Accesorios Peso 1 tonelada
Altura central: 200 mm Anchura central: 1250 mm gr. Turn-Ø sobre la cama: 400 mm Diámetro del husillo: 55 mm Soporte del husillo: Camlock D1 6" mm Cono de recogida de edredones de contrapunto: 5 MK Velocidades del husillo: 1-297/1-861/1-2700 rpm electr. Conexión: 400 V, 7.5 kW Requisitos de espacio: 2900 x 1800 x 1500 mm Peso: 2200 kg
turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 40 - 2500 U/min centre height: 165 mm spindle bore: 38 mm total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,1 x0,9 x 1,3 m Lead and pull spindle lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1.200 mm Height of centres: 400 mm swing over bed: 800 mm diameter over cross-slide max.: 510 mm control: FANUC 21i-TB spindle bore: 250 mm Lathe - cycle-controlled | HARRISON - ALPHA 2800XS The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA- 2800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 554 mm turning length: 1000 mm control: Fanuc total power requirement: 11 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,6 x 1,6 x 1,8 m HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide Travel in X: 310 mm Tailstock: Technology: Manual tailstock Quill ø: 95 mm Stroke: 145mm Taper: MK 6 Equipment/accessories: Chip management: chip tray Coolant management: KSS pump Shaft Machining: Fixed Bezel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Harrison M500 Ø 530 x 2000 mm Distance between centers: 2000 mm Swing over bed: 530 mm Swing over cross-slide: 370 mm Swing in gap: 730 mm (200 mm long) Diametre of main spindle bore: 80 mm Power on main spindle: 9,7 kW Number of speeds: 31 > 1600 rpm Length: 3450 mm Width : 1170 mm Height: 1830 mm Weight: 2277 kg
Description Machine in excellent condition, still installed by the user Specifications Harrison Producer Model 1460 Year 2003 Condition Used CNC FANUC Maximum workable length 1 (capacity) 1500 bar passage 78 spindle connection ASA 8 spindle speed 2200 spindle power 11 kw spindle 300 mm manual turret 4 positions turning on the wagon 270
Description: Center lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual Turning diameter over bed 330 mm Turning diameter over support 210 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 40 - 2500 rpm Center height 165 mm Spindle bore 38 mm Total power requirement 2.2 kW Machine weight approx. 0.7 t Space requirement approx. 2.1 x 0.9 x 1.3 m Approx. Onsite Dimension. (l x w x h): 2,100 x 900 x 1,300 mm, weight approx.: 700 kg
This Harrison M390 Lathe was manufactured in the year 2004 in United Kingdom. It has 2 axis. The machine has a spindle speed of 2000 rpm.
Altura central: 0 mmLejos del centro: 800 mmTanque del husillo: 50 mm Make Harrison 19 Tipo 190 Año 70 er LUZ Universal drehmaschine draaibank Altura central (mm) Columpio = 380 Distancia central (mm) DBC = 800 Diámetro del husillo = 50 Velocidades 1500 rpm chuck / sistema de herramientas