Modelo
(Fabricante: INDEX)
Inv. Núm. : 6160 Tipo: GE 42 NC Productor: INDEX Generado: Parámetros: Sistema de control: Siemens Longitud máxima de giro: 360 mm diámetro de giro: 300 mm Velocidad mínima del husillo: 31.5 1/min Velocidad máxima del husillo: 6000 1/min Potencia total requerida: 35 kW Equipo: Cargador de barras
INDEX GSC 65 Torno CNC YOM 1997, instalado 1998 Diámetro de torneado en mandril 250 mm Columpio sobre la cama, máx. 300 mm Longitud de torneado 400 mm Control: Índice C 200-8 (Sinumerik 880) Ejes X/Z/C Recorrido de las diapositivas: Carrera de la torreta 1- X / Z 163 / 550 mm Torreta 2- X / Z recorrido140 / 250 Diámetro interior del husillo, aprox. 65 mm Diámetro interior del portaherramientas 30 mm Velocidades del husillo 25 - 5000 rpm Rango de alimentación 0 - 15000 rpm Accionamiento del husillo 0,5 - 40 kW Carga eléctrica total 60 kW - 380 V - 50 Hz Peso, aprox. 8.500 kg Accesorios y piezas de repuesto -Control de trayectoria continua CNC SIEMENS, modelo 880 (INDEX C 200-8). Se ha cambiado el monitor. -Mandril hidráulico de alta potencia ROHM HS 200/3 -Contrapunto -Torretas: 3 -Herramientas de rotación en la torreta 1- 2, en la torreta 2- 3. -Hus ...
Torno de curva INDEX B60 - no completo - como dispensador de piezas de repuesto - ver imágenes
Torno de curva INDEX ER60 - ver imágenes Más: máquina de rotación MANURHIN Traminer TR22B
7 uds. Index VD30 monturas con interfaz Capto, 3 uds. alimentadas por él, ¡perfecto estado!
Tipo tándem con 2 salas de trabajo Control: SIEMENS Sinumerik Ø máx. de torneado: 200 mm Carreras: X= 520, Z= 200 mm Revólver con 14 estaciones Transportador
Detalles de la máquina Número de almacén 1105-03632 Centro de torneado y fresado CNC tipo máquina Hacer ÍNDICE Tipo G 200 Año de construcción 1997 Tipo de control CNC Controlador C200- Siemens 840 C Ubicación de almacenamiento FRANCIA País de origen Alemania Plazo de entrega inmediata Base de carga desde la ubicación Técnicas Diámetro de torneado 200 mm Longitud de giro 400 mm Controlador C200- Siemens 840 C Diámetro de circulación 420 mm Diámetro de la varilla 65 mm Diámetro del mandril 165 mm Rango de velocidad - husillo ~ 6,000 rpm Potencia de accionamiento - Motor del husillo 100% ED= 7.5/13/20 kW Potencia de accionamiento - Motor del husillo 40% ED= 13.3/22/29 kW Diámetro de la varilla 65 mm Diámetro del rodamiento del husillo 100 mm Diámetro del mandril 165 mm Rango de velocidad - husillo ~ 6,000 rpm Potencia de accionamiento - motor del ...
Máquina multihusillo usada INDEX MS36E construida en 1996 que incluye muchos accesorios (pinzas, pistolas sincronizadoras, ruedas intercambiables, varias curvas de trabajo, etc.) La planta está prácticamente lista para su despacho, en un estado desmantelado para su inspección. Para fotos, datos técnicos y una lista de accesorios, consulte los Apéndices. No tiene defectos importantes, está básicamente listo para funcionar, solo se deben cambiar las mangueras de goma antes de la puesta en marcha y el sistema refrigerante-lubricante debe limpiarse y enjuagarse a fondo. Listado de accesorios MS36E Revista Iemca Loading Sistema de filtro de aceite (+3 rollos de papel de filtro) Pinzas Sincronizadoras (frases) 24 16 26 20 27 2x 23 28 2x 26 30,5 2x 27,5 31 32 División Horneado 33 para mandril de 3 mandíbulas 34 36 SW 24 1x tope del hus ...
Diámetro de torneado 620 mm Longitud de torneado 1500 mm control Siemens 808D Diámetro del husillo 100 mm Diámetro de giro sobre corredera 420 mm rango de velocidad de giro del husillo 10 - 4000 U/min accionamiento principal 41 kW Velocidad de desplazamiento rápida 10000 mm/min Potencia total requerida 65 kW Peso de la máquina aprox. 9 t Dimensiones de la máquina aprox. 6,4 x 3,0 x 2,5 m Unidad de control CNC Siemens 808D nuevos accionamientos/servomotores, 24 meses de garantía en el equipo - Transportador de virutas - Sistema de enfriamiento de herramientas -Contrapunto - Cambiador de herramientas (Torre) con 8 posiciones OPCIONAL INCLUIDO - - soporte de piezas (Lunete) La máquina está completamente actualizada
Índice HE 25 con alimentación de varilla controlado hidráulicamente con dispositivo de torneado largo
FANUC Control 32iB máx. giratorio Ø 380 mm Longitud máx. de torneado 600 mm Paso del husillo 65 mm Diámetro del mandril 250 mm Velocidad del husillo 4.000 rpm REVÓLVER 1 Recorrido: X= 220 (+60/+280), Y= 150 (+/- 75), Z= 600 mm Estaciones 14, alimentadas 7 Estaciones de velocidad 6.000 1/min MULTIFUNCIÓNREVÓLVER Recorrido X= 110 (+85/-25), Z= 650 mm Estaciones 10, incluyendo 7 plazas fijas (VDI 30) 3 herramientas superpuestas UniFlex Contrapunto Sistema de manipulación FMB unirobot M-10iA-12-7P, año 2017
- Control: Sinumerik (Índice C200-4D) - Paso de varilla 65 mm - Velocidad 5000 1/min - Torreta 1 con 8 estaciones (todas accionadas), incl. husillo síncrono - Torreta 2 con 6 estaciones (todas accionadas) - Revólver 1/2 recorrido: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Procesamiento posterior 5 Estaciones de perforación traseras - Eje C -Transportador Peso de la máquina aprox. 3000 kg Huella que incluye el armario de control y el transportador de virutas: Largo x Ancho x Alto: 3430 x 1240 x 1750 mm Cargador de carga: INDEX MBL Peso: aprox. 2.000 kg Dimensiones LxWxH: 4500x1100x1500 mm
MARCA: ÍNDICE AÑO: 1996 MODELO: G200 TIPO DE APLICACIÓN: TORNEADO UBICACIÓN: AUSTRIA TIPO DE MÁQUINA: TORNO DISPONIBILIDAD: INMEDIATA Información técnica UNIDAD DE CONTROL MARCA: SIEMENS MODELO: C200-4 D Información adicional BENEFICIOS DE LA MÁQUINA VENTAJAS TÉCNICAS DE LA MÁQUINA: - HSP & GSP Ø 60MM REV 1 X,Y,Z,B, / CON WAN Y HUSILLO DE FRESADO REV 2 X,Z CON CONTROL DE ROTURA DE TALADRO WAN REV 1 Y 2 - DISPOSITIVO DE EXTRACCIÓN DE PÓRTICO - LA MÁQUINA HA ESTADO FUNCIONANDO CON UNA OLLA DE SUJECIÓN DE 65
MARCA: ÍNDICE AÑO: 1998 MODELO: MS 42C TIPO DE APLICACIÓN: TORNEADO UBICACIÓN: ITALIA TIPO DE MÁQUINA: TORNO DISPONIBILIDAD: INMEDIATA Información técnica DATOS GENERALES MEDIDAS ANCHO: 7200 MM MEDIDAS PROFUNDIDAD: 1700 MM MEDIDAS ALTO: 2300 MM PESO DE LA MÁQUINA: 11000 KG UNIDAD DE CONTROL MARCA: ÍNDICE ACCIONAMIENTO PRINCIPAL NÚMERO DE HUSILLOS: 6 RANGO DE VELOCIDAD DEL HUSILLO: 5000 1/MIN Información adicional BENEFICIOS DE LA MÁQUINA VENTAJAS TÉCNICAS DE LA MÁQUINA: - DIÁMETRO MÁXIMO DE LA BARRA : 42 MM
Torno de anillo automático de Keul - Ø giratorio: 1.0 - 8.0 mm - Dispositivo de agarre y giro - Posición de descarga parcial 1 - Unidad de mecanizado posición 1 - Unidad de enderezamiento de rollos -Transportador - Carrete Ø 1200 mm, 1.000 kg
Índice GFG 450, Construido en 1996, Índice de control C 200 - 4, Recorrido X/Z 430/545 mm, Ø de circulación sobre el carro de la cama máx. 425 mm, Paso de barra 100 mm, 2 revólveres de 8 velocidades / 6 velocidades, torreta 1 herramientas motorizadas, Grabación VDI 50 , eje C 0,001°, Transportador transmisión de 4 etapas hasta 2.250 rpm, Mandril de tres mordazas 315-82, Cilindro de sujeción total OVS 150, Accesorios
Control: Fanuc 32i Memeser giratorio 380 mm Husillo principal D-65mm Velocidad 4000 rpm Freno de retención Eje C Portaherramientas 1 Eje X/ Z 220/ 600 mm distancia de trabajo Portaherramientas 1: 14 tomas (VDI 30)/ 7 adjuntas Herramientas Portaherramientas 2 Eje X/Z 110/650 mm distancia de trabajo Portaherramientas 2: 7 disparos (VDI 30) + 3 UniFlex -52 ATC de medición de herramientas Chip-federals
Torno de barra Index G200 :::CARACTERÍSTICAS TÉCNICAS::: Modelo CNC: Siemens Versión CNC: Index C 200 - 4 Nariz del husillo principal: ASA 6 Espacio libre de la barra del husillo principal: 60 mm Diámetro de torneado: 150mm Longitud de giro: 400mm Revoluciones principales del husillo: 5000 Número de torretas de herramientas: 1 Número de puestos de herramientas antes de la torreta: 14 Número de primera torreta motorizada: 14 Primer tipo de accesorio de herramienta de torreta: VDI 25 Primera torreta de recorrido del eje X: 155 mm Primera torreta de recorrido del eje Y: +-60mm Primera torreta de recorrido del eje Z: 400 mm Modelo y marca de revista de barra: LNS Hydrobar L 3000 mm Contrapunto: sí Posicionamiento: automático Chip evacuador: alfombra Otros datos técnicos: El contrapunto tiene un eje programable Equipo d ...
Pinza portaherramientas fija para el índice G300 (VDI30) Condición: Usado Conjunto compuesto por: 14 piezas de soporte de barra de perforación 24 piezas de soportes de acero torneado 2 piezas de desvío
Soporte de herramienta fijo para Index G300 (VDI30) Condición: Usado Conjunto compuesto por: 14 piezas de soporte de barra de perforación 24 piezas de soportes de acero torneado 2 piezas de desvío
Soporte de herramientas accionado para índice G300 (VDI30) Condición: Usado Conjunto compuesto por: 10 piezas de portaherramientas rectos (1 pieza más como se ve en la imagen) Soporte de herramienta angular de 14 piezas
- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - ABC equipped with bar loader. The machine is in a very well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 140 mm travel -z axis: 710 mm control: Siemens C 200-4 main spindle speeds: 5.000 U/min bore diameter: 65 mm numbers of positions in the tool changer: 24 (2x12) CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
work travel: X:320 & Z:1250 mm rapid traverse: X:20 & Z:40 m/min control: INDEX - C200-4D --- MOTOR MILLING SPINDLE ---: ------------------------- tool taper: HSK A63 turning speeds: 12000 U/min Power: 27,5 KW front bearing: 80 mm turning speeds: 3000 U/min MAIN SPINDLE D102 direct drive: ------------------------- spindle diameter in front bearing: 1200 mm spindle passage: 102 mm forward bearing diameter: 170 mm CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. turning speeds: 10.000 U/min. chucking diameter: 130 mm spindle diameter in front bearing: 70 mm numbers of positions in the tool changer: 12 toolpiece turning speed range: 6.000 U/min Vertical Turning Machine | Index - V100 Equipment: - coolant device, - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001) - all-round workpiece carrier system: Schnaithmann (built in 2000) - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. turning speeds: 10.000 U/min. chucking diameter: 130 mm spindle diameter in front bearing: 70 mm numbers of positions in the tool changer: 12 toolpiece turning speed range: 6.000 U/min Vertical Turning Machine | Index - V100 Equipment: - coolant device, - rotating workpiece transport system, - Chip filter: Knoll-320S-1 (built in 2001), - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 36 (42) mm turning length: max. 280 mm control: C200-4 / 840C Siemens Main spindle:: turning speed range - main spindle: max. 6.300 min/-1 power capacity - main spindel: 13 / 21 kW max. Torque: 62 / 102 Nm spindle diameter in front bearing: 85 mm spindle hollow: 36 mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: max. 4.500 min/-1 max. Torque: 10 Nm clamping diameter: max. 42 mm clamping length max.: 38 mm spindle bore: 15,5 mm Turret 1:: number of toolpositions: 8 pos. shaft cross cut: 25 x 48 DIN 69880 change-time tool to tool: 0,2 sec travel -x axis: 90 mm travel -z axis: 280 mm Feed force: 5,5 kN rapid traverse: 24 m/min Driven Tool Positions:: 8 Spindle speed - driven tools: 6.000 min -1 power capacity - driven tools: 3,3 kW max. Torque: 7,5 Nm Backside processing:: Fixed tools max.: 5 pos Turret 2:: number of toolpositions: 6 pos. travel -x axi ...
spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.26HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.32HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine: 15 Pos. accessories:: Pos. electric measuring devices: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 2010 mm control: Siemens 840D turning diameter over slide rest: 320 mm spindle passage: 100 mm Tool changer: turning speeds: 10-2800 U/min transmission ratio: 4 chip conveyor: steady: 240 mm tail stock: 3-jaw-chuck diameter: 400 mm main gear-box motor: 55 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 580 mm turning length: 1600 mm control: Siemens 810 T turning diameter over slide rest: 320 mm spindle passage: 85 mm Tool changer: turning speeds: 12,5-4000 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: 170 mm tail stock: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 600 mm turning length: 1500 mm control: C200 T turning diameter over slide rest: 425 mm spindle passage: 100 mm Tool changer: live tooling: turning speeds: 10-2800 U/min transmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mm steady: tail stock: c-axis: total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 280 mm turning length: 800 mm control: Siemens type: 840 D c-axis: live tooling: Tool changer: turning speeds: 4000 U/min swing diameter: 320 mm 3 jaw chuck Forckrath: 250 mm tail stock: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 34 mm turning length: . mm bore depth: . mm Control: Index type: S 3 live tooling: bar loader: Sameca total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mm turning length: 400 mm control: Siemens type: C 200-4 840 C spindle passage: 65 mm Tool changer: 2 x14 Pos. Turret 12-fold, 12 stations: c-axis: live tooling: 2x Revoler total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm Tool changer: 14 Pos live tooling: turning speeds: 25-4000 U/min transmission ratio: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm tail stock: Tool changer: 14 Pos total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 80 mm turning length: . mm control: Siemens C 200 tool change unit: 14 live tooling: swing diameter: 130 mm spindle passage: 42 mm turret head: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.