pressure: 80,0 t punching cross-cut in cmm: 31,0 in 25 mm shear: flat material: 500x18 / 300x22 mm L-beam: 150 x 12 mm round bar steel: 50 + 25 mm square edge steel: 50 + 30 mm throat: 510 mm blade length: 500 mm work height max.: ca. 1.100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80,0 / 110 t punching cross-cut in cmm: 27,0 in 20 mm L-beam: 120 x 13 mm L-beam: T 120 x 12 mm shear: flat material: 500x18 / 400x19 mm throat: 510 mm work height max.: 1050 mm total power requirement: 6,5 kW weight: 1650 kg range L-W-H: 1750 x 850 x 1850 mm very good condition () Furnishing: - hydraulic, combined profile steel shears with release station with punching station .. punching capacity 800kN Flat steel shears .. Shear capacity 100kN Angle steel scissors Angle steel knife for cutting 90 ° & 45 ° miters Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...
pressure: 50,0 t punching cross-cut in cmm: 31 in 12 mm stroke: max. 32,0 mm column arm: 510 mm work height max.: 1070 mm stroke - stepless adjustable: 10 - 32 mm no. of strokes: max. 45 Hub/min oil volume: 45,0 l total power requirement: 4,0 kW weight of the machine ca.: 1120 kg. range L-W-H: 1118 x 650 x 1680 mm good condition () from a maintenance workshop Furnishing: - hydraulic punch, with large overhang - Sheet metal wipers with wiper plates - stepless stroke adjustment - Various application tools - Die base - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
barra redonda acero: 50 mm borde cuadrado acero: 45 mm L-beam: 140 x 13 mm potencia total requerida: kW peso de la máquina ca.: t dimensiones de la máquina ca.: m ab Standort preiswert gegen Gebot abzugeben!
Sheet thickness: 8,5 mm Bar diameter: 0 mm Punching size: 150 mm (1) hydraulic / (2) mechanical: 2 MACH-id 7630 MAKE Peddinghuas TYPE Peddimax 1002 YOP 1995 SPECIFICATIONS Stroke adjustable 50 mm Punching force100 T Table Length 1000 mm Table Width 500 mm Throat 510 mm Capacity Ø x thickness 90 x 8,5 mm Capacity L profile 150 x 150 x 12 mm DIMENSIONS Length 2800 mm Width 3900 mm Height 2100 mm Weight 3000 kg
Capacidad de cizallamiento: 100 mmCapacidad de giro: 60 mmCapacidad de pinza: 100 t Carrera ajustable: 60 mm < consanguina / > Fuerza de punzonado: 100T Capacidad x grosor: 50 x 15 mm Fuerza de corte: 100T Garganta: 510mm Capacidad L perfil: 120 x 13 mm Longitud: 2.200 mm Ancho: 1.400 mm Altura: 2.200 mm Peso: 2.000 kg
Model: Super 210 - 20 (electro mechanical) with electric backgauge with feed-in table with large selection of tools Punching cap: 100 ton Dia x sheet thickness: 30 xnbsp; 25 mm / 90 x 8 mm Max cutting-thickness in plate: 250 x 20 mm Blade length: 300 mm 90°-cut corner: 160 x 100 x 15 mm 45°-cut corner: 150 x 100 x 14 mm Cut to length round: 55 mm Cut to length square: 50 mm Max material thickness by notching: 16 mm Length: 2250 mm Depth: 1210 mm Height: 2420 mm Weight: 4250 kg
This Peddinghaus FDB 600 was manufactured in 2000. A robust drilling machine from Germany, it features a Siemens Sinumerik control unit, chip conveyor, and internal cooling. Its designed for the construction industry, handling steel plates with a maximum thickness of 50mm and length up to 6000mm. Ideal for structural steel plates, the Peddinghaus FDB 600 machine we have for sale is immediately available. Contact us for further details regarding this drilling machine.
Machine in good technical condition, possibility of testing by agreement. Hydraulic cutting and punching machine. It can cut flanges up to 500x20 mm, logs up to 40 mm, roxor, squares. Punch the boards with different types of cutters. Ideal for the production of anchor and connection plates. The machine is like new, max. 100 hours worked.With accessories.
With various punches; CNC control/ monitor;
Maximum cutting thickness 20mm, unloading 500mm, with corner 105x105mm, equipped with lifting roller bench 3700x520mm, PEHU 210 control box and work table with various accessories.
Cut/corner machine. -Max corners: 70 x 70 mm. -Cutting: corner profile, Z-profile, see photo 4. -Rotatable compared to base. -Incl longitudinal stop. -Stands on a trestle and can be moved with a pallet truck.
Press force: 1400KN, Exhaust 430 mm (700 mm). Equipped with piece counter. Includes APS table with length measuring system and control box.
plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm
Description: SPECIFICATIONS Character: Peddinghaus Type: 210 Super 11 Machine dimensions (L×W×H): 1,500 x 1,000 x 1,800 mm Capacity: 40 T Round: 34 mm ø Square: 30 mm ø Strip: 120 x 12 mm Angle iron: 100 x 10 mm weight approx.: 1,100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,800 mm
Description: SPECIFICATIONS Character: Peddinghaus Type: 210 Super 20 Capacity: 95 T Punch: 30 x 25 mm Round: ø55 mm Square: ø50 Strip Angle iron Unloading: 500 mm Electrical installation weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 2,300 x 2,400 mm
Description: SPECIFICATIONS Brand: Peddinghaus Type: 210 Super 13 Machine dimensions: (L×W×H) 1800 x 1000 x 2100 mm Capacity: 65 T incl. various punches weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,000 x 2,100 mm
Hand lever shears, long knife, sheet metal and round steel shears, sheet metal shears -Sheet metal and round steel shears: Type 3 BR 4 300 -Steel sheet: up to 4 mm -Round steel: up to 13 mm -Knife length: 300 mm -Downholder: infinitely adjustable -Underframe: massive steel construction -Dimensions: 335/575/H2080 mm -Weight: 103 kg
Pipe vise, pipe jack, Ror vise, plumbers vise, pioneer -Max. Clamping range: Ø 75 mm -with: shelf -Number: 1x pioneers available -Price: per piece -Dimensions: 1300/900/H160 mm -Weight: 20 kg
Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg
Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -Type: 440065124502 -Type: 440065124501 -1x dimensions: 136/130/H25 mm -1x dimensions: 128/132/H25 mm -Weight: 6 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 65/80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -max bending capacity: Ø 32 mm -Drive: 1.3/2.1 kW -Bending angle: Pin-controlled, two-speed, each with pins for left/right to set the angle -Equipment: adjustable counterholder strips, standard bending tool -Dimensions: 750/660/H970 mm -Weight: 356 kg
Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø16 x 210 mm -Dimensions: 265/100/H95 mm -Weight: 3.1 kg
Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg
Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg
Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg
Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: slot 10 x 26 mm -Punching dimensions: see photo with dimensions -Hole: Ø 40 mm -Dimensions: 400/90/H205mm -Weight: 7.5kg
Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: Long hole type S27-40 -Hole: Ø 40 mm -Dimensions: 300/150/H250 mm -Weight: 12.4 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg
Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg
Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg
Bench vise, locksmith vise, parallel vise -Jaw width: 150 mm -Span width: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg
Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg
Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm -Weight: 9.3kg
Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124603 144876 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg
Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-way combined model 210 SUPER 11 -Pressure force: 40 tons -Drive power: 3/2.2 kW 2800/1400 rpm -Applications: punching, shearing, cutting, notching -Footswitch: 2 -Length stop: Electric contact stop, adjustable up to approx. 1 m -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1620/1350/H1740 mm -Weight: 1323 kg
Hand lever shears, long knife, sheet metal and round steel shears -Peddinghau: s 4R/7, long knife, sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance specification for: material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg
Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg