búsqueda detallada
8327 resultados
usado
Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...
usado
Mobile dust extractor Brand: SCHUKO Type: Vacomat 300 XP New machine Technical data: Connection Ø: 300mm Filter cleaning: pneumatic Volumen flow: 5950 m³/h Motor power: 7,5 kW Filter surface area: 32,0 m², Test sign H3 / BGHM HO 143032 Dust level M, AWN 16 Noise absorbation: 74 dB(A) Incl. switch box Schuko V22/23 incl. forklift consoles
usado
Mobile dust extractor SCHUKO Type: Vacomat 180 XP Technical data: Connection Ø: 180 mm Filter cleaning :pneumatical (manual start) Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Filter surface area: 13,5 m² Test sign H3 / BGHM HO 163002 Dust level M, AWN 16 Cone Sound absorbation: 74 dB(A)
usado
Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)
Año de construcción: 1999
usado
workpiece diameter:250 mmworkpiece length:1000 mmturning speeds:25 - 250 U/mintotal power requirement:19,5 kWCombined Tapes and Stone Superfinish Maschine in exzellent condition. This machine was designed for fully machined of V8 - TDI cam shafts.- 8 Staions with stone for camlobe - 5 stations with tapes for bearing seatIstallation of the line:- Stacking cell PROMOT- Linear gantry for loading the workpiece on the lift bar conveyor- Machine - Unloading with linear gantry ( oil whizzer installed ) - Washing machine AHRENS + BODE
Año de construcción: 1989
usado
Description: Technical data Saw blade projection for saw blade diameter 450 mm to 125 mm Collet opening 130 mm Main saw motors 18 kW each Scoring saw motors 2.2 kW each W.02 number : 9105 QUICK CLAMPING DEVICE 'POWER-LOC' FOR HS Patented quick clamping system with high axial clamping force. Simple operation, working without without compressed air. W.04 Number : 9115 QUICK CLAMPING DEVICE 'POWER-LOC' FOR VS Patented quick clamping system with high axial clamping force. Simple operation, working without compressed air. Translated with www.DeepL.com/Translator (free version)cutting height: max 125 mm, main saw blade: 450 mm, main motor: 18 kW, scoring saw: 2,2 kW, Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 700 mm, weight approx.: 150 kg
Año de construcción: 1998
usado
saw blade protection: bei sägeblattdurchmesser 450 mm bis zu 125 mm, Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 700 mm, weight approx.: 150 kg
Año de construcción: 1998
usado
Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 70 kg
Año de construcción: 2015
usado
Description: HOLZ-HER TECTRA 6120 CLASSIC Horizontal Panel Saw Cutting length x cutting width: 3,100 x 3,100 mm 4,400 x 3,100 mm 4,400 x 4,250 mm Max. saw blade projection: 82 mm SAW UNIT Motor output: 7.5 kW Saw blade dia.: 350 x 4.4 x 30 mm Speed: 1,000 - 4,070 rpm SCORING UNIT Motor output: 2.2 Kw Saw blade dia.: 180 x 4.4/5.4 x 30 mm Speed: 1,000 - 5,400 rpm SAW CARRIAGE Feed rate: 1 - 70 m/min Return rate: 70 m/min RIP FENCE Feed rate: 25 m/min Return rate: 100 m/min WORKING CLAMPS Clamp opening dimensions: 82 Cutting length 3,100 mm 5 Each: ,2 additional Cutting length 4,400 mm 6 Each: 3 additional AIR CUSHION TABLES Cutting length 3,100 / 4,400 mm: 3 Each OPERATION CONTROL 21.5” standard monitor (Windows operating system) COMPRESSED AIR Operating pressure: 6 Bar Air consumption NL/cutting cycle: 32 EVACUATION Basic machine connection dia.: 1 x 160 mm Pressure beam ...
Año de construcción: 2014
usado
Description: MACMAZZA TS 75 Beam Saw dimension (l x w x h) approx. (2 packs) 6160 x 1160 x 1800 mm 5200 x 1100 x 750 mm air table - 3 Air table cutting depth - 3800 cutting height- ,60 mm cutting length- ,3800 main motor - 10 hp saw blade protection - 60 mm saw blade - yes main motor: 10 kW, cutting length: 3,800 mm, cutting depth: 3,800 mm, cutting height: 60 mm, saw blade protection: 60 mm, scoring saw blade: Yes mm, air table: 3 air table, Approx. Onsite Dimension. (l x w x h): 6,160 x 1,160 x 1,800 mm, weight approx.: 3,500 kg
Año de construcción: 2011
usado
Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions , ,- Length approx. 230 - 3200 mm , ,- Width of the single plate approx. 220 - 1220 mm , ,- Width of the plates in double row ...
Año de construcción: 2017
usado
Description: measuring range: X = 2,700 mm / Y = 1,250 mm / Z = 85 mm (other dimensions on request) resolution: 0.01 mm accuracy (tolerance): <, +/- 0.1 mm connected load: min. 2 sockets 230 Volt AC field of application incoming goods: quality inspection of delivered parts quality assurance: sample measurement directly on the production line production: for regular checking of machine settings before the start of production of a series process control (safety in production) reduction in set-up time through automatic feedback to the operator of the drilling spindles to be adjusted in the X, Y and Z directions. quality check before delivery - assembly & training by HECHT AG, possible by exclusive arrangement. - factory overhaul 2023 - 12 months warranty with max. 2-shift operation (not valid for spare and wear parts)Approx. Onsite Dimension. (l x w x h): 3,364 x 2,600 x 1,300 mm ...
Año de construcción: 2007
usado
Description: Manual available at this LINK Minimum working size 40 x 25 mm Maximum working size 200 x 105 mm Working length 200 - 3500 mm X1 Axis Stroke: 6120 mm X2 Axis Stroke: 6120 mm X3 Axis Stroke: 6200 mm X4 Axis Stroke: 6200 mm CU Axis Stroke: 1620 mm Y1 Axis Stroke: 4000 mm Y2 Axis Stroke: 4000 mm Y3 Axis Stroke: 4000 mm Z1 Axis Stroke: 440 mm Z2 Axis Stroke: 440 mm Z3 Axis Stroke: 620 mm V1 Axis Stroke: 1100 mm V2 Axis Stroke: 1100 mm1 W Axis Stroke: 230 mm A Axis Stroke: 180° C Axis Stroke: 360° SP1 Spindle Power: 14 kW SP2 Spindle Power: 14 kW SP3 Spindle Power: 12 kW Tool changer magazine with 62 positions Max tool diameter 200 mm Tool attachment HSK 63 Blade group power 2.2 kW Blade diameter 200 mm Total power 55 kilowatts SINUMERIK HMI control WARNING! Belts, elastic bands, and photocells of loading and transfer systems require maintenance.serial number: 152/06, Approx. ...
Año de construcción: 2009
usado
Description: - Workpiece length , All units max. approx. 5200 mm , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width , Rear stop for all units max. approx. 1400 mm , Rear stop cutter 25 mm max. approx. 1550 mm , Front stop for all units max. approx. 1150 mm , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...
Año de construcción: 2008
usado
Description: ATTENTION: Location 97944 Boxberg- Windischbuch, Germany Very well maintained HOMAG Optimat BOF 311/60/K CNC processing center. Technical data: Workpiece length all aggregates - single loading max. 6.000 mm and pendulum loading max. 2.375 mm Workpiece length tool diameter with 25 mm - Single occupancy max. 6,175 mm and pendulum occupancy max. 2,550 mm Workpiece width all units - Front max. 1,450 mm and rear max. 1,700 mm Workpiece width tool diameter with 25 mm - Front max. 1,525 mm and rear max. 1,850 mm Workpiece thickness - Max. 300 mm incl. clamping device Clamping table Console with LED display in X and Y direction - Console length 1640 mm Main spindle 15 KW and speed 1.000 - 24.000 rpm - C-axis with interface for FLEX-5 (aggregate not included!) Drilling head MPU horizontal and vertikal S360° - MultiProcessingUnit with C-axis +/- 185° for drilling operations wi ...
Año de construcción: 2000
usado
Description: MULTIAX C113/REX CNC Machining Center 3 axis changing units - yes control - to be confirmed drilling spindels horizontal y-axis - yes drilling spindels vertical x-axis - yes drilling spindles horizontal x-axis - yes drilling spindles vertical y-axis - yes Nesting machining - Flat table Rexilon path-feed rate max. X-axis - 60 mts/min path-feed rate max. Y-axis - 60 mts/min path-feed rate max. Z-axis - 30 mts/min vacuum pump - 1 vacuum pump: 1 m³/h, path-feed rate max. X-axis: 60 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 30 m/min, changing units: yes, control: to be confirmed, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,800 x 2,700 mm, weight approx.: 4,500 kg
Año de construcción: 2007
usado
Description: WEEKE - WAMHOFF OPTIMAT VENTURE 1 CNC Machining Centre Travel range X - Y - Z axis: 3860 - 1523 - 185 mm Rapid Traverse speed X- Y - Z axis: 60 - 50 - 15 mm Compresses air required: 7 bar Dust extraction port: 200 mm Electric power - total connection load: 16 kWserial number: 0-250-11-1658, Approx. Onsite Dimension. (l x w x h): 5,800 x 1,600 x 2,000 mm, weight approx.: 4,200 kg
Año de construcción: 2011
usado
Description: MORBIDELLI (SCM GROUP SPS) UNIFLEX HP CNC Machining Centre PANEL DIMENSIONS Top and Bottom Drilling, routing units Min./Max. length panel: 250/3000 mm , Min./Max. length panel without panel recovering: 250/1700 mm Min./Max. width panel: 120/1300 mm THICKNESS Min./Max. Single panel thickness: mm 10/80 Min./Max. overlapping panel thickness: 5(x2)/35(x2) mm MAX WEIGHT PANEL: 100 Kg WORKING TABLE HEIGHT: 950 mm Z STROKE Z stroke upper boring head: 145 mm Z stroke lower boring head: 90 mm PROGRAMMING SPEED Clamps programming speed: 120 m/min Head programming speed in Y direction: 35 m/min , Head programming speed in Z direction: 30 m/min , COMPRESSED AIR INTAKE: 6,5 Bar CONSUMPTION AND DIAMETERS Medium compressed air consumption: 500 Nl/min , Max instant compressed air consumption: 800 Nl/min Dust extraction hood diameter – upper head: 300 mm Section air consump ...
Año de construcción: 2023
usado
Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KWApprox. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg
Año de construcción: 2005
usado
Description: BIESSE COMIL CF 2000 Clamping Press Machine Working length: 2500mm Working width: 600mm Working hight: 1200mm Max throughfeed width: 720mm Feeding speed: 7,5-37,5m/min Adjustable time for the horizontal pistons: 6,85m/min Working air pressure: 6-8 bar Consumption per working cykle: 115dm3 Power 400 volt, 50 Hz, 3 phaseserial number: 55,969, Approx. Onsite Dimension. (l x w x h): 7,050 x 720 x 2,600 mm, weight approx.: 2,900 kg