búsqueda detallada
8413 resultados
usado
Vertical manual panel saw Brand: Putsch Type: SVP 133 New machine standard features: - electric driven, automatic shift gate - swivelling centre support for small workpieces (length approx. 3,900 mm) - 4 vertical fixed sawing positions horizontal cuts - 1 measuring stop for vertical cuts - retractable transport wheels - self breaking engine - Preparation for connection to separate extraction system - TRK extraction system (BG wood dust tested) - 400V/3/50Hz - safety devices, sound insulation, tool set for saw blade change - operating instructions and spare parts catalogue technical data: - max. cutting length: 3200 mm - Max. vertical cut : 3200 mm (3100 with digit. dimension display for vertical cuts). - max. cutting height: 1900 mm - highest horizontal cut: 1700 mm - max. cutting depth: 60 mm - engine power: 5 hp (3.7 kW) - saw blade Ø: 250 mm - speed sa ...
Año de construcción: 2014
usado
Edge thickness: 0.4-10mm, feed rate: 12m/min, connected load: 11kW, operational hours counter: 12,314h.
usado
Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...
Año de construcción: 2002
usado
Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.
usado
CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Vario Viso Angle adjustment 2 x 0 - 100° on two sides adjustable Max. drive speed 13.760 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,09 Turning direction left/right Torque max. 22 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm, Pitch circle 45mm and 52mm
Año de construcción: 1998
usado
usado
CNC unit for moulding or saw blade package Brand: Atemag Type: Ultra Line Mega Cutter Position of tool spindle 90° Max. drive speed 12,000 R.P.M. Max. tool spindle speed 7.690 R.P.M. Gear ratio i = 1:0,641 Turning direction left/right Torque max. 22 Nm Tool interfaces: arbour with 30mm diameter, 120 clamping length, max. tool diameter 160mm - without tools -
Año de construcción: 2000
usado
Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.
usado
CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized ...
Año de construcción: 2002
usado
Año de construcción: 2016
usado
used CNC machining center brand: SCM Morbidelli Type: Author M400 F - CE safety standards Realization: Author M 400 F nesting cell - multifunctional table with X-Y Processing area = 4970x2120 mm C-cell equipment: - Remote control for the machine - Central optimized dust protection - F18L drilling head with inverter and pressure tank - milling spindle 5 axes Prisma 5 KS with 12 kW with power cooling - automatic change R16 * 1 tool holder cone HSK-63 with collet ER-32 automatic central lubrication Multifunctional work table made of aluminum automatic lifting table, loading system with vent pipes, pusher and carpet for discharge* folding stops for zones A and D controlled by NC Vacuum pump 250 MP 50 Hz Preparation for 2 additional vacuum pumps Xilog MaestroTelesolve programming software Teleservice via the Internet - Mobile remote control TecPad w ...
Año de construcción: 2001
usado
Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.
usado
Cnc through feed drilling machine Brand: Cosmec Type: Star new mashine 1 x infeed air cushion table of 1500mm 1 x outfeed air cushion table of 1500mm Maximum workable piece in width 950mm Minimum workable piece in width 60mm Maximum workable piece in lenght, infinite Minimum workable piece in lenght 250mm 1 x Moving gripper 1 x Stop for reference in entrance 1 x Laser to detect the pieces lenght 1 x Drilling unit with 10 vertical + 6 horizontal spindles + saw in X 1 x Router of 8hp with ISO30 connection 1 x 13 points semiautomatic lubrification 2 x Vertical clamps with double row of pression each one with a pressing bar + a line of pressing wheels 1 x PC with 21 screen 1 x Cosmec interface Seaworthy packing Optional: 1 x 6 positions tool changer
Año de construcción: 1997
usado
Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation.
usado
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm
Año de construcción: 2001
usado
Año de construcción: 2002
usado
Prensa de pellets para biomasa o alimentación animal. CPM 3020-4 con motor de 132 kW Incluye acondicionador CPM Accionamiento directo 132 kW, proporciona una transferencia de energía del 98% Carcasa de engranajes redondeada de hierro fundido con nervaduras interiores para un funcionamiento más silencioso Abrazaderas de herramienta segmentadas para cambios de herramienta más rápidos Diseño modular de la caja de engranajes para una mayor flexibilidad en la producción Cámara de pellets de acero inoxidable Un motor de 132 kW para una mayor eficiencia Muy buen estado. N.º de oferta del vendedor de reventa CPM 3020
Año de construcción: 2006
usado
Sierra multihoja Paul Tipo K 34G O-1200 Características técnicas: • Anchura de trabajo (mm): 1200 • Ancho de corte (mm): 1100 • Altura de corte (mm): aprox. 60 • Potencia del motor (kW): aprox. 22 • Rodillos de acero: superior e inferior
Año de construcción: 2024
nuevo
Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40 ...
Año de construcción: 2024
nuevo
Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40 ...