búsqueda detallada
37064 resultados
Año de construcción: 2008
usado
Description: The Rösler RHBE 15/20 is an overhead conveyor blast machine that is suitable for the surface treatment of heavy or large-volume workpieces. , General information Type: RHBE 15/20 Machine number: 42825/08 With air extraction and material recycling Technical specifications Machine type: Overhead conveyor blast machine Turbines: Gamma 300G Hook load: 500 kg Door opening approx.: 1500 x 2000 mm workpiece dimensions L/W/H: 2000x1500 mm, charge weight: approx. 500 kg, total power requirement: 62 kW, Approx. Onsite Dimension. (l x w x h): 6,000 x 5,000 x 6,000 mm, weight approx.: 5,000 kg
nuevo
x-travel:4000/7000/9000 mmy-travel:700 mmz-travel:300 mmspindle cone: 30 SKturning speeds:0/24000 U/minspindle drive:18 kWWeight approx.: 3200 (bei 4m in X) kgmachine dimensions:6800x3100x3000 (bei 4m in X) mmautomatic tool changer:8 optional 16 oder 30 CNC controller:mit Zyklen von Italmac :6 Klemmvorrichtungen automatisch verfahrbar
usado
bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:80 mmtotal power requirement:1,1 kWweight of the machine ca.:195 kgdimensions of the machine ca.:530 x 650 x 1850 mmspindle speeds::355, 710, 1400, 2800 U/minTable dimensions:340 x 280 mm
usado
Article: three-phase current motorManufacturer: Antriebstechnik BauknechtType: RFV 22/4-75Pe.g. to use as spindle motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Año de construcción: 1988
usado
pressure:70 tdistance between columns:750 mmstroke:900 mmtable surface area:700 x 1000 mmDistance table/ram, stroke up:900 mmtable height over floor:680 mmram surface:700 x 1000 mmside window:600 mmmax. tool weight:5,0 tmax. capacity of swivelling ram plate:2,0 tSpeed down:0 - 50 mm/sSpeed up:0 - 48 mm/sWorking speed:0 - 8 mm/soil volume:140 lpower capacity:9,5 kWweight:8,0 tDimensions (WxDxH):2,2 x 1,2 x 3,7 m
Año de construcción: 1985
usado
Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7
Año de construcción: 2004
usado
Travel X/Y/Z: 630mm/630mm/500mm, speed: 15000rpm, table size X/Y: 500mm/500mm, max. workpiece height: 930mm, max. workpiece weight: 800kg, spindle type: HSK63, spindle motor: 32kW, tool positions: 180, dimensions X/Y/Z: approx. 5500mm/4000mm/4000mm, weight: approx. 16000kg. Including tools, hydraulic unit. Defects: Gearbox, drive motor, energy chains. Documentation available.
Año de construcción: 1983
usado
Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible.
Año de construcción: 2015
usado
There are three identical superfinish machines Nagel available, connected load: 11kW, controls: SIEMENS SIMATIC HMI, length: 2565mm, width: 2600mm, height: 2663mm, operational hours counter: 34,051h, year of construction: 2x 2015, 1x 2014, with documentation, there are additionally two automations Promot available.
Año de construcción: 2019
usado
Description: Basic Machine Universal machining centre DMU 60eVo New DMG MORI Design traverse path X/Y/Z 600/500/500 mm / X/Y/Z 23.6/19.6/19.6 in motorspindle speedMASTER® SK 40/BBT speed range 20 - 18.000 min-1 SK40 speed range 18.000 - 20.000 min-1 SK40-BIG PLUS® 35 kW (40% ED), 25 kW (100% ED) 46.9 hp (40% DC), 33.5 hp (100% DC) tool taper SK40 (DIN ISO 7388-1-A, AD) for Pull-Studs DIN ISO 7388-3-A, AD NC swivel rotary table chain type tool changer with 30 positions and double gripper active cooling direct measuring system full cabin Swarf conveyor (scraper type), spray gun MPC (Machine Protection Control) 3D-Control, ERGOline® control Dynamic package for DMU 60 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Control CELOS with Siemens 840D sl Operate includes 21,5“ ERGOline® C ...
Año de construcción: 1999
usado
Description: Natural gas feeder Efficiency 9.9 kWh/m³ Consumption 35 m³/h Maximum temperature 800°C Maximum coil weight 3 tons Maximum coil diameter 1400 mm Maximum coil height 2000 mm Power 350 kW PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 2 exceptional transports 2 normal trucksApprox. Onsite Dimension. (l x w x h): 12,000 x 6,000 x 4,000 mm, weight approx.: 25,000 kg
nuevo
:VM-2018 | VM-3018 | VM-4018 x-travel:2300|3200|4100 mmy-travel:2000 mmz-travel:800 mmdistance spindle nose and table:180~980 mmdistance between columns:1840 mmtable-size:2300x1600|3200x1600|4100x1600 mmtable load:8|10|12 tT-slot (width-distance-quantity):22x180x8 mmspindle cone:50 BT/SKspindle speed:6000 (opt.10000) 1/minspindle drive:15/18,5|22/26|22/26 kWSpindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:20/20/15|20/20/15|15/20/15 m/minfeeds:1~10000 mm/minTool changer:32 -fachworkpiece length:350 mmtool diameter:110/225 mmweight of tools max.:20 kgpositioning accuracy:0,020|0,025|0,03 mmrepeating accuracy:0,015|0,020|0,025 mmtotal power requirement:60 kvamachine length:7027|8927|10327 mmmachine width/height:5217x4339|5217x4339|5217x4339 mmWeight approx.:22|26|30 tCNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain
usado
bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm
usado
Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Año de construcción: 1978
usado
pressure:40 tthroat:285 mmstroke:500 mmDistance table/ram, stroke up:630 mmtable surface area:560 x 560 mmpressure of drawing cushion in table:16 tstroke of drawing cushion in table:200 mmdie cushion area:425 x 425 mmtable height over floor:800 mmram surface:450 x 450 mmpower requirement:11,0 kWweight:4,0 tdimensions (WxDxH):1,15 x 1,8 x 2,85 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 light guard:Sick
Año de construcción: 2001
usado
Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton
Año de construcción: 2008
usado
Travel X/Y/Z: 1600mm/1500mm/1250mm, table dimensions X/Y: 800mm/1000mm, round pallet storage: 4+1 with clamping hydraulics, speed: 6000rpm, feed X/Y/Z: 40000mm/min, rapid traverse X/Y/Z: 40000mm/min, max. workpiece weight: 2500kg, tool magazine: 405 places/SK50/set-up station. Including 70bar high-pressure coolant system, emulsion mist extraction system. On-site inspection is possible. Available from January 2025.
Año de construcción: 2006
usado
Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible.
Año de construcción: 2003
usado
Max. operating pressure: 70bar, hydraulic fluid filling quantity: 630l, with loading portal and sliding guide with carriage.
Año de construcción: 2008
usado
Description: The machine package offered here consists of two well-maintained STARRAG HECKERT HEC 500D XXL Horizontal Machining Centres and a Flexible Loading System for 20 workpiece pallets from the renowned manufacturer FASTEMS. FASTEMS Loading system Type: FPC-1000 Number of pallet spaces: 20 ,(10 top row & 10 bottom row) Number of set-up stations: 1 Number of machine connections: 2 Loading system dimensions (L x W x H) approx.: 14800 x 3767 x 4150 mm Max. loading capacity incl. pallet: 1000 kg Max. pallet loading dimensions (L x W x H): 950 x 950 x 1000 mm / Ø 1000 mm Horizontal Machining Centre (data per machine) Control and Machine numbers Control: SIEMENS Sinumerik 840 D Machine numbers: 16334 / 16335 Working area Number of simultaneous axes: 4 Pallet size: 500 x 630 mm Workpiece weight approx.: 800 kg Workpiece dimensions approx. (L x W x H) 950 x 950 x 844 mm / Ø 1 ...