usado ARBURG para la venta

There are two identical injection moulding machines available.

Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.

Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.

Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.

There are eight ARBURG Allrounder 220M available.

Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.

Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible.

Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.

Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.

Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.

Connected load: 42kW.

Connected load: 40kVA.

Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.

Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.

Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.

Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.

Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.

Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.

Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.

Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On ...

This Arburg Allrounder 420 C 1300-350 injection moulding machine was manufactured in 1998. It features a clamping force of 1300 kN and offers screw diameters of 35, 40, and 45 mm, allowing versatile moulding capabilities. The machine includes a Schuma conveyor belt and optional Geiger Handling, enhancing operational efficiency. With a robust design and substantial injection pressures, its ideal for precise plastics processing. Consider the Arburg Allrounder machine we have for sale. Contact us for more information.

This Arburg ALLROUNDER 1200 T 800 - 70 Injection moulding machine was manufactured in the year 2017 in Germany and has 2090 pump hours. The machine has a clamping force of 800 kN, is in very good condition, and is well maintained. This Injection Moulding Machine is not CE certified and will be sold without CE Certification. It was part of an automation solution in one production cell. Being sold now as single machine it is ideal to integrate in an existing production line. The buyer is responsible for the required CE certification.

This injection moulding machine, the ARBURG 420C-1000-250, was manufactured in 2001. It is designed to deliver consistent performance and reliability for various plastic manufacturing applications. The machines robust design and ease of operation make it a valuable asset for producing high-quality moulded products. The ARBURG 420C-1000-250 machine we have for sale is well-maintained and ready to meet your production needs effectively. Contact us for more information.

This used injection moulding machine was manufactured in 1999. An ARBURG 420C-1000-250, its designed for precision and efficiency in production. Ideal for a wide range of plastic moulding applications, this machine offers exceptional precision and ease of use. This particular machine represents a valuable addition to any production line. Consider the ARBURG 420C-1000-250 machine we have for sale as a strategic investment in your manufacturing capabilities. For further information, please contact us.

This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for precision and reliability in production. Notably, it includes handling for enhanced efficiency, making it an excellent addition to any production line. The ARBURG 420 C 1000-250 machine we have for sale stands as a testament to ARBURGs engineering excellence and durability. For further information, please contact us.

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used material: PBT GF 30 ABS/PA PP Service history: 3.2015 – Replacing the CF card reader with a floppy disk drive 5.2013 – Machine calibration 5.2009 – Machine calibration

Injection weight: 17 g Closing force: 400 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 385x385 Min mold height: 225 Control type: Selogica Tongue: English,Other Installed power: 16.4 Libra: 2040 Dimensions: 1.3 x 3.1 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Arburg 520C-2000-675 Shot weight: 240 g Closing force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Column spacing: 520 x 520 mm Plate size: 715 x 715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 126,766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Robot nest Air valve

Injection weight: 191 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 470x470 Size of plates: 650x650 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 15kW+ 14 Working hours: 36.211 Libra: 5200 Dimensions: 5m x 1.6 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes

Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Injection: Screw diameter: 55 mm cm3: 558 Bars: 2380 General: Closing weight: 14 Tons Dimensions length: 6.7m Dimensions width: 2.25m Dimensions height: 2.3m Options: Cores: 1 Robot interface: no Bi metal: yes 2 blow guns

Injection weight: 141 g Closing force: 1,500 kN Screw diameter: 35 Injection pressure: 2000 Column spacing: 520x520 Size of plates: 688x688 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 33.9 Working hours: 45343 Libra: 6490 Dimensions: 4.9 x 1.7 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 615 x 615 Clearance between columns (hxv) [mm] 420 x 420 Min./max. mold height [mm] min 250 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 13.8 Dimensions and weight Net weight with control cabinet [t] 4.33

Injection weight: 487 g Closing force: 1,500 kN State: Used Screw diameter: 60 Injection pressure: 1390 Column spacing: 520x520 Size of plates: 700 x 700 Control type: Selogica Installed power: 74 Working hours: 63,600 Libra: 7300 Dimensions: 6 m x 2.4 m Feed hopper: NO

Working industrial used Visible by appointment Material preheater Arburg brand

Control type: SELOGICA TOUCH Number of hours: 35,000 hours Closing force: 80 T Opening stroke: 500 mm Between columns: 470 x 470 mm Tray dimensions: 637 x 637 mm Mini/maxi mold: 250 mm Max distance between trays: 750 mm Injection: Screw diameter: 30 mm Screw length: 23.3/D cm3: 106 Bars: 2500 General: Motor power: 18.5 kW Heating power: 6.4 kW Closing weight: 3.5 Tons Injection weight: Dimensions length: 4 m Width dimensions: 1.3 m Dimensions height: 2 m Options: Cores: 1 Robot interface: YES Bi metal: YES

Injection Weight: 434g Closing force: 2,000 kN Screw diameter: 55 mm Injection pressure: 1650 bar Column spacing: 520x520 mm Board size: 728x728 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 80000h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, ticketing snail

Closing force: 60 T Opening stroke: 300 mm Between columns: 370 x 370 mm Tray dimensions: 510 x 510 mm Min/max mould: 200/400 Max gap between trays: 700 mm Injection: Screw diameter: 30 mm Screw length: 20/D cm3: 85 Bars: 2000 General: Motor power: 19kw Heating power: 9.4kw Closing weight: 4 Tons Injection weight: 77 GRAMS Dimensions length: 3.5m Dimensions width: 1.4m Dimensions height: 1.8 m Options: Cores: 0 Robot interface: yes Bi metal: yes Others: 1 blow gun

Type of control: SELOGICA Number of hours: 28,000 hours Closing force: 250 T Opening stroke: 550 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Mini mold: 300/750 mm Max distance between trays: 1300 mm Injection: Screw diameter: 60 mm Screw length: L/D cm3: 664 Bars: 2000 General: Motor power: kw Heating power: kW Closing weight: 14Tons Injection weight: Dimensions length: 6.7m Width dimensions: 2.25m Dimensions height: 2.3m Options: Cores: 1 Robot interface: no Bi metal: YES Others: 2 blowguns

ARBURG 400T 820S 4000/1300 YEAR 2014 Year of manufacture: 2014 Type of control: SELOGICA Number of hours: 31,086 H Closing force: 400 T Opening stroke: 700 mm Distance between tie-bars: 820 x 820 mm Plates dimensions: 1171 x 1171 mm Min/max mould: 850 mm Max gap between plates: 1550 mm Screw diameter: 60 mm Screw length: 20/D cm3: 664 Bars: 2000 Motor power: 55kw Heating power: 23kw Closing weight: 20 Tons Injection weight: Dimensions length: 6.5m Dimensions width: 2.4 m Dimensions height: 3.5 m Options: Cores: 2 Robot interface: yes 1 blow gun

Type of control: SELOGICA Closing force: 150 T Between columns: 470 x 470 mm Injection: Screw diameter: 60 mm Bars: 2000 General: Motor power: 45 kW Heating power: 25.9 kW Closing weight: 12 Tons Injection weight: Dimensions length: 7m Width dimensions: 1.70m Dimensions height: 2.2m Options: Cores: 2 Robot interface: yes Bi metal: yes

Arburg 520C 1500 800 injection molding machine year 2005 Can be seen upstream

Arburg 570C 2200-1300 Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 664 Injection weight [g] 558 Injection pressure [bar] 2000 Dimensions and weight Net weight with control cabinet [t] 9.3 Dimensions (length x width x height) [m] 6.16x1.91x2.39 m Additional equipment: Hybrid machine: fast, energy-saving Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Main motor of the machine - servo motor driven by inverter - energy saving

Closing force: 150 T Between columns: 570 x 570 mm Injection: Screw diameter: 60 mm Bars: 2000 General: Motor power: 45 kW Heating power: 25.9 kW Closing weight: 12 Tons Injection weight: Dimensions length: 7m Width dimensions: 1.70m Dimensions height: 2.2m Options: Cores: 2 Robot interface: yes Bi metal: yes

Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 498 x 498 Clearance between columns (hxv) [mm] 320 x 320 Injection unit Screw diameter [mm] 25 Injection volume [cm3] 54 Injection weight [g] 45 Injection pressure [bar] 2500 Dimensions and weight Net weight with control cabinet [t] 2.15 Dimensions (length x width x height) [m] 3.5 x 1 x 1.7

thermoset BMC, included in the sale 2 pcs Tool-Temp tempering device - water, 1 pc Wittmann W711-0507 robot, Duroplat D45 unit (dry sets), 2 pcs Regloplas tempering device,

Closing unit Clamping force [kN] 350 Dimensions of mounting plates (hxv) [mm] 324 x 250 Clearance between columns (hxv) [mm] 221 x 221 Min./max. mold height [mm] 150-300 Maximum opening width [mm] 500 Injection unit Screw diameter [mm] 20 Injection volume [cm3] 31 Injection weight [g] 26 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 7.5 Heater power [kW] 4.5 Dimensions and weight Net weight with control cabinet [t] 1.06 Dimensions (length x width x height) [m] 2.7 m x 1.4 m x 2.2 m

Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 446 x 446 Clearance between columns (hxv) [mm] 320 x 320 injection unit Screw diameter [mm] 25 Injection weight [g] 45 Injection pressure [bar] 1550 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 4.9 Dimensions and weight Net weight with control cabinet [t] 2.08 Dimensions (L x W x H) [m] 3.12 x 1.43 x 1.99

Arburg 320S 500-150 Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./max. mold height [mm] min 225 Maximum opening width [mm] 575 Injection unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 8.4 Dimensions and weight Net weight with control cabinet [t] 2.25

Injection Weight: 232g Closing force: 1,500 kN Screw diameter: 45 mm Injection pressure: 1580 bar Column spacing: 470 x 470 mm Plate size: 650 x 650 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 28.7 kW Working hours: 70.000 h Weight: 4900 kg Dimensions: 4.8 x 2 meters Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, bimetallic screw