usado ARBURG para la venta

Description SERVO PUMP WITH BRUSHLESS DRIVE 6 HOT ROOM ZONES EUROMAP 67 INTERFACE COLORIZER INTERFACE BATTERY WITH 3 ADDITIONAL FLOWMETERS

Description EUROMAP 12 INTERFACE

Description SILICONE PRESS 12 zone mold heating water channels 2 zones 6-zone thermoregulator control WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017

Description Press with electric extruder NO ROBOT

Description AVAILABLE LANGUAGES: GERMAN - ITALIAN - ENGLISH

Description Electrical drawing machine 12 zone mold heating software package n ° 1 and 2: extensive control of the mechanical mold functions for complex applications, extended movements software package n ° 3: production control software package n ° 5: optimization helps the operator software package n ° 6: quality assurance software package n ° 7: documentation with real value protocol

Description movements with brushless motors: closing - mold height movement - dosing the others are plumbers installed languages ​​Italian English German

Description 6 zone mold heating

Description bi-injection machine vertical injection with 20mm diameter screw hoist capacity 200kg height from the ground 3800mm

Description bi-injection machine vertical injection with 20mm diameter screw hoist capacity 200kg height from the ground 3800mm

Description Verticalizable

Description 6 zone mold heating

This ARBURG 320 C 500-100 + Multilift H with B-Axis Injection moulding machine was manufactured in 2003 in Germany. It has a clamping force of 500 kN and a screw diameter of 30 mm. The distance between platens is 550 mm and the opening stroke is 350 mm. In total it operated 64000 pump hours. The injection moulding machine comes with a Multilift H with B-Axis, featuring a handling weight gripper plus part weight of max. 5 kg and a swivel range B-axis of 90 degrees. See original tech specs (DE) attached as PDF below.

This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set Ø 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below. Important remark: The injection unit is leaking, there is a cost estimate from Arburg for approx. 15,000 euros net including assembly. This defect has not yet been rectified as the machine is not currently being used. The sale does not include the housing, any hoppers ...

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. In the current set up, the machine is not CE certified to work stand alone. There is a quote for retrofit the machine to have it CE certified for 3.000€

This ARBURG Allrounder 630S 2500-800 injection moulding machine was manufactured in May 2016. It offers a robust 2750kN clamping force, with a hydraulic drive system and precise control features, including 18 hot runner control zones. Key specifications include 45mm screw diameter, a 318cm³ dosing volume, 2470 bar maximum injection pressure, and a 242 cm³/s injection speed, ensuring high performance and consistent quality in production. Furthermore, its equipped with a Multilift Select robotic system, enhancing automation and efficiency in handling. The ARBURG Allrounder machine we have for sale is tailored for high-volume and intricate moulding operations. It is in very good condition, and has low hours (only 4507 automatic hours) as it was mainly used as technical center machine for sampling and tryouts. Contact us for more information about this injection moulding machine. See origi ...

This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.

This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.

This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).

This ARBURG Allrounder 420S 1300-675 Injection Moulding Machine was manufactured in 2004 in Germany. It has a clamping force of 1300 kN and is equipped with a 55mm screw with 2080 bar injection pressure. The open stroke is 575 mm and the mould height is min. 275mm. The machine is controlled by an ARBURG SELOGICA control unit and has operated 53425 hours.

This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. The machine has a clamping force of 3200 kN and a srew diameter of 60 mm.

This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.

This ARBURG Allrounder 420 C 1000 - 290 Golden Edition Injection moulding machine was manufactured in 2022 in Germany. It is equipped with a Servo-controlled injection unit which has clear distance between tie bars of 420mm. This injection moulding machine has a clamping force of 1000 kN and features a plasticizing cylinder set of 30 mm screw diameter (without nozzle) in wear-resistant design for processing thermoplastics with corrosive and/or abrasive components, with a low to medium filler content of glass, talc orTiO2. It is included an ARBURG THERMOLIFT 100-3 and Temperature control unit (HB-Therm Thermo-5 HB-140Z1). In total is has operated 619h automatic, 891h pump and 81567 machine cycles. See shot weight specifications per material, nozzle and cylinder temperature guide values in photo gallery.

This ARBURG 320 S 350-150 Injection moulding machine was manufactured in 2001 in Germany. It has a clamping force of 350 kN and a screw diameter of 30 mm. The min. mold installation height is 172 mm and the platen size is 472 x 472 mm. In total it operated 73384 pump hours. See original tech specs sheet (DE) as PDF attached below.

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.

This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.

Clamping Force: 500 ton // Shot Weight (Max): 2092 g

Clamping Force: 50 // Shot Weight (Max): 172